TRUSCO NAKAYAMA CORPORATION

카리코미이케 가위(래칫 기능)　T-410R

Ratchet type scissors for cutting thick branches.
It can be cut with about 1/3 to 1/5 of the force of conventional scissors.

카리코미이케 가위 680mm

ARS Corporation

브랜치 커팅 선수 로즈푸르 S

KINBOSHI Co., Ltd.

트리밍 가위를 이용한 분기 스위칭　2015

Cutting ability has been improved by the shape of the blade.
A type that can be used both for trimming and for cutting thick branches.

BAHCO

확장형 정리용 가위　PG-19-F

Pruning shears for cutting branches of tall trees.
Since the handle part expands and contracts, it can be adjusted arbitrarily.

BAHCO

확장형 카리코미 가위　PG-57-F

The handle is aluminum and lightweight.
Since the handle part expands and contracts, it can be adjusted arbitrarily.

확장 세트 강력한 트리밍 가위 K-950Z

KOYAMA EDGED-TOOL WORK Co., Ltd.

가위 다듬기("노코카리", 잡초용)　F3-590

The saw blade prevents slipping and cuts easily.
The L-neck shape makes it easy to mow grass and weeds.

KOYAMA EDGED-TOOL WORK Co., Ltd.

가위 트림("NOKOKARI", 긴 핸들, 180mm x 650mm)　F2-650

The saw blade prevents slipping and cuts easily.
Hard plated finish.

ARS Corporation

확장 세트 트리밍 가위 K-900Z　K-900Z

Lightweight, three-stage expansion type with special shape aluminum pipe.
For cutting grass and working at heights.

HOUNEN KIHAN Co., Ltd.

광산 by 야스기강 트리밍 가위　HT-2050

This is the best sharpness of the type with steel, which has inherited the construction of the sword.
For trimming garden trees and hedges.

Berger

450mm 경량 트리밍 가위

Berger

310mm 잡초 다듬기 가위　2100

The handle (suitable for both right and left handed) can be moved up and down to cut weeds easily.
Made of German steel suitable for tools with both "stickiness" and "hardness."

ARS Corporation

대체 모서리를 위한 대체 모서리형 경량 트리밍 가위

Doukan

V165 트리밍 가위　102

The back blade has an anti-slip V-cut finish that does not allow branches to escape.
For pruning grass and twigs such as garden trees.

Doukan

트리밍 가위를 사용한 CFC 원형 굵은 분기 스위칭　103

It is also possible to cut branches about 25 mm in diameter at the base of the blade.
Thick cut scissors.

Doukan

미아이언 트리밍 가위　105

Compact and lightweight type that is easy to use for women and the elderly.
For pruning grass and twigs such as garden trees.

Doukan

이지 시바 L 타입 전용 스프링

Doukan

상자목재용 트리밍 가위　113

Slender blade with clam sharpening and transparent lining.
The back blade has been treated to protect against tar.

Doukan

UEKIYA 트리밍 가위 "MATSU" 해머 마감　123

This is a beautiful gem with clam sharpening and back penetrating blade.
For pruning grass and twigs such as garden trees.

Doukan

자초프 L형 잡초 절단용 가위　126

With the special shape and spring, the blade opens naturally, increasing the work efficiency.
It is a V-cut blade that does not allow grass to escape.

Doukan

바보　127

With the special shape and spring, the blade opens naturally, increasing the work efficiency.
The blade is nickel plated to resist rust.

Doukan

바보로 가꾸기 전용스프링 전용스프링　0127-S

Can be easily replaced with pliers.
The blade is plated and resistant to rust.

Berger

경량 트리밍 가위(4440, 800mm)　4440

Lightweight cutting scissors.
The groove on the inner surface of the blade makes the cutting separation good, and accurate cutting can be performed continuously.

Berger

트리밍 가위 (540mm (곧은 날))

Berger

교체용 블레이드(가위 4175의 트리밍용)　94424

Replacement blade for cutting scissors 4175.
Replacement blade for cutting scissors 4175.

CHIKAMASA Co., Ltd.

야니 클리너　YC-300

It has a mousse shape that prevents dripping and catches dirt well.
Rust prevention agent will prevent rust.

Snap-on Tools Japan K.K.

pruning shears

Snap-on Tools Japan K.K.

Hardening scissors for lawn　P75

Cutting scissors for lawn to trim the border.
It is suitable for cutting around trees and short trees in addition to lawns.

Doukan

예초기(L형)　

The shape of the blade is designed to follow the ground, so you can mow the lawn on the rack.

KINBOSHI Co., Ltd.

스트레치 트리밍 가위(모서리가 있는 새 알루미늄 패턴)　2021L

The edge of the receiving blade firmly grasps the branch, so it is a cutting scissors that can cut with 1/2 of normal force.
The handle expands and contracts, so you can easily cut branches at high places.

KINBOSHI Co., Ltd.

스트레치 레그 컷 가위(모서리가 있는 새 알루미늄 패턴)　2043L

The edge of the receiving blade firmly grasps the branch, so it is a thick branch cutting scissors that can cut with 1/2 of normal force.
The handle expands and contracts, so you can easily cut branches at high places.

IGARASHI

보통가위(두꺼운 절단용 가위, 참나무 손잡이)　A-12

It is a forged blade made by fire-making forging.
Ideal for pruning of thick branches up to 25 mm.

IGARASHI

트리밍 가위(야스기강, 혼시키, 게이트형, 사쿠 2개, 붉은오크손잡이)　A-14

It is a forged blade made by fire-making forging.
Adhesive Hitachi Yasugi steel for easy blade sharpening.

IGARASHI

트리밍 가위(야스기 강, 스테인레스 강, 오크 손잡이)　A-16

It is a forged blade made by fire-making forging.
Adhesive Hitachi Yasugi stainless steel for easy blade sharpening.

IGARASHI

트리밍 가위(야스기 스틸, 스톱, 430mm, 콥, 오크 핸들)　A-21

It is a forged blade made by fire-making forging.
Adhesive Hitachi Yasugi steel for easy blade sharpening.

IGARASHI

트리밍 가위(야스기 스틸, 스톱, 430mm, 콥, 일본식 손톱 마감, 오크 핸들)　A-32

It is a forged blade made by fire-making forging.
Adhesive Hitachi Yasugi steel for easy blade sharpening.

IGARASHI

트리밍 가위(야스기 스틸, 블루 페이퍼, 5 샤쿠, 일본어 네일 마감, 오크 핸들)　A-40

It is a forged blade made by fire-making forging.
Adhesive Hitachi Yasugi blue paper for easy blade sharpening.

IGARASHI

트리밍 가위(야스기 강철, 스톱, 킬링, 오크 핸들)　A-5

It is a forged blade made by fire-making forging.
Adhesive Hitachi Yasugi steel for easy blade sharpening.

IGARASHI

트리밍 가위(야스기강, 스크루토미, 사쿠, 오크핸들)　A-71

It is a forged blade made by fire-making forging.
Adhesive Hitachi Yasugi steel for easy blade sharpening.