[Snap-on Tools Japan K.K.] AllProducts
랩 인스트루먼트 및 소모품
-
파이핑, 피팅, 그라운드 조인트, 부품
-
실험실 용품
-
전자/전기 부품 및 제어 장치
공장 작업 도구 및 용품
-
작업 도구, 공급
-
생산 가공 장비
-
안전 장치
-
물류 보관 상품
-
절삭 공구
-
사무용 주택 용품
-
농산물
식품 위생 및 검사
-
레스토랑, 주방 용품
사무용품 및 문구류
-
Office Supply
교육, 학습 용품
-
School Supplies
-
Double Head Flare Nut Wrench for Height 6 Point 9 x 11 mm
5 제품을 찾았습니다.
JPY: 7,680-
USD: 48.14-
-
Single-Eyed Single-Mouth Wrench Inch 11 Pieces Set 111Z11T
Both wrench and glasses have an offset angle of 15 degrees.
The size is the same, short type.1 제품을 찾았습니다.
JPY: 27,000
USD: 169.25
-
Single-Eyed Single-Mouth Wrench Inch 8-piece Set 111Z8T
Both wrench and glasses have an offset angle of 15 degrees.
The size is the same, short type.1 제품을 찾았습니다.
JPY: 16,760
USD: 105.06
-
Double Head Flare Nut Wrench for Height 6-Point 5-Piece Set 11692TH
This is the work at height series.
Does not damage the connecting fittings of pipes and tubes.1 제품을 찾았습니다.
JPY: 39,780
USD: 249.36
-
Single-Eyed Single-Mouth Wrench 8 Pieces Set 11MS8
Both wrench and glasses have an offset angle of 15 degrees.
The size is the same and it is a long type.1 제품을 찾았습니다.
JPY: 28,050
USD: 175.83
-
Ratchet Combination Wrench for Height 12 Point 9 mm
16 제품을 찾았습니다.
JPY: 9,450-
USD: 59.24-
-
Striking Single-ended Wrench 100 mm
21 제품을 찾았습니다.
JPY: 4,910-
USD: 30.78-
-
Single-Eyed Single-Mouth Wrench Inch 11 Pieces Set 1952Z11T
15° wrench, 10° glasses.
The outer diameter of the eyeglasses section is thin, easy to use in tight places, and uses a dynamic drive that does not chip corners.1 제품을 찾았습니다.
JPY: 36,360
USD: 227.92
-
1000 V Insulated Specification Hex Wrench 3 mm
3 제품을 찾았습니다.
JPY: 3,000-
USD: 18.81-
-
1000 V Strong Type Nipper for Both Soft and Hard Wires
3 제품을 찾았습니다.
JPY: 9,400-
USD: 58.92-
-
1000 V Insulated Wire Slip Ring Pliers 2223V160
1000 V insulation specification.
European standard EN60900 compliant product.1 제품을 찾았습니다.
JPY: 9,320
USD: 58.42
-
1000 V Flat Nose Pliers 2421V160
1000 V insulation specification.
European standard EN60900 compliant product.1 제품을 찾았습니다.
JPY: 23,510
USD: 147.37
-
1000 V Insulated Long Nose Pliers 200 mm 2427V200
1000 V insulation specification.
European standard EN60900 compliant product.1 제품을 찾았습니다.
JPY: 11,520
USD: 72.21
-
1000 V Insulated, Long Nose Radio Pincers 160 mm
2 제품을 찾았습니다.
JPY: 10,420-
USD: 65.32-
-
-
1000 V Insulated Type T Socket Handle 11 mm
7 제품을 찾았습니다.
JPY: 6,830-
USD: 42.81-
-
-
구멍톱(SUPERIOR, Ø30MM 이하) 3834-ARBR-9100EL
Since the arbor part moves, the chips are pushed out, and the working time is shortened.
Protects hands from heat when cutting flour.1 제품을 찾았습니다.
JPY: 9,270
USD: 58.11
-
구멍톱(상위, 위) 3834-ARBR-930EL
Since the arbor part moves, the chips are pushed out, and the working time is shortened.
Protects hands from heat when cutting flour.1 제품을 찾았습니다.
JPY: 9,110
USD: 57.11
-
아버(Arbour)[바이메탈 홀 쏘(Bimetal Hole Saw)용, 32밀리미터를 초과하는 것으로 한정한다] 3834-ARBR-930ES
This is the Sandoz Flex Series from Barco.
Since the arbor part moves, the chips are pushed out, and the working time is shortened.1 제품을 찾았습니다.
JPY: 8,850
USD: 55.48
-
Arbour 교체 블레이드(SUPERIOR) 구멍톱, 위(30mm 이하) 3834-DRL-EL
Since the arbor part moves, the chips are pushed out, and the working time is shortened.
Protects hands from heat when cutting flour.1 제품을 찾았습니다.
JPY: 3,230
USD: 20.25
-
이중 금속 식목재 교체 블레이드(30mm 이하) 3834-DRL-ES
This is the Sandoz Flex Series from Barco.
Since the arbor part moves, the chips are pushed out, and the working time is shortened.1 제품을 찾았습니다.
JPY: 9,280
USD: 58.17
-
High Height Gasket Scraper 150 mm 40000TH
This is the work at height series.
The bi-molded handle provides a comfortable grip and reduces hand fatigue.1 제품을 찾았습니다.
JPY: 5,650
USD: 35.42
-
-
가방 하드 하단 형식 4750FB1-19A
The bottom is completely waterproof.
The grip is easy to grip and easy to carry, so you won't feel cold when it's cold.1 제품을 찾았습니다.
JPY: 14,790
USD: 92.71
-
덮개(가방 열기 하드 하단 유형) 4750FB1-19B
The Velcro strap, which stops the cover, can be used with the bag open when needed.
Comes with a pocket for a screwdriver on the outside.1 제품을 찾았습니다.
JPY: 18,700
USD: 117.22
-
-
가방 4750FB2W-24A
There is a Velcro to stop long items, and it can be safely fixed and removed quickly.
The big side pouch contains plastic boxes for small consumables such as screws, nuts, washers, and terminals.1 제품을 찾았습니다.
JPY: 33,790
USD: 211.81
-
가방 하드 바텀 타입 전기기사 4750FB3-12
Comes with a loop holder for carabiners.
Handles that are comfortable to the hand and have excellent durability.1 제품을 찾았습니다.
JPY: 13,770
USD: 86.32
-
PC 및 도구 가방 하드 바닥 유형 4750FB4-18
The inside large and small pockets can hold tools.
Comes with a removable compartment.1 제품을 찾았습니다.
JPY: 20,680
USD: 129.63
-
-
Leather Toolback 4750FOLTC1
This is a European style leather bag.
1 제품을 찾았습니다.
JPY: 16,710
USD: 104.75
-
레이저 장비의 고도 작동 해머 홀더 4750-HHO-2
For hammer holder for work at height.
It has a ring for a lanyard.1 제품을 찾았습니다.
JPY: 3,650
USD: 22.88
-
-
attache case 4750RCHD01
BAKO HD series that can withstand heavy use.
Protects contents from water and dust.1 제품을 찾았습니다.
JPY: 45,350
USD: 284.27
-
Attache case for tool 4750RCHD011
BAKO HD series that can withstand heavy use.
Comes with a partition for storing tools.1 제품을 찾았습니다.
JPY: 76,850
USD: 481.73
-
-
4단 견고한 캐스터 케이스 4750RCWD4
Uses a latching system to prevent sudden jumping out.
The drawer layout can be changed freely.1 제품을 찾았습니다.
JPY: 115,000
USD: 720.87
-
-
포치 타입 액세서리 4750RCWD-AC2
Partition accessory with 9 tool pouches for 4750RCWD4.
1 제품을 찾았습니다.
JPY: 9,800
USD: 61.43
