TRUSCO NAKAYAMA CORPORATION

자석 훅 행거 후면 W250

TRUSCO NAKAYAMA CORPORATION

자석 상자 행거 후면 W514　KBZ-BH

Specific small containers can be installed for parts management, etc.
Since it is a magnet type, it can be easily attached without drilling holes.

TRUSCO NAKAYAMA CORPORATION

레모라 자석후크　KBZ-MF

You can hang small items on the hook.
For tool management.

TRUSCO NAKAYAMA CORPORATION

스탠드용 레모라 자석 에어건　KBZ-AGS

Due to the special shape of the border, the handle part of the air gun can be stored without playing.
For storing and managing air guns.

TRUSCO NAKAYAMA CORPORATION

마모라 자석 육각형 키 렌치 행거　KBZ-6K

Can be managed by hooking a hex wrench of size 9.
Since it is magnetic, it can be attached easily without making a hole.

TRUSCO NAKAYAMA CORPORATION

레모라 자석 썬더 행거　KBZ-SN

You can hook the head of the disk grinder and manage it on the side of a pole or machine.
Since it is magnetic, it can be attached easily without making a hole.

TRUSCO NAKAYAMA CORPORATION

레모라 전동드릴 드라이버 후크　KBZ-DR

Can stably hook gun type electric screwdriver, etc.
Since it is magnetic, it can be attached easily without making a hole.

TRUSCO NAKAYAMA CORPORATION

자석 고리 S

TRUSCO NAKAYAMA CORPORATION

레모라 노브 스타일 썬더 행거 자석　KBZ-NMSN

Can be easily attached to the work bench.
To avoid damaging the head of the grinder, there is a cushion sponge attached to the holder.

TRUSCO NAKAYAMA CORPORATION

Remora P-타입 자석 베이스 펀칭공　KBZ-PMB

Tool storage holder (Koban shark P-type series) sold separately can be installed to organize tools.
Since it is magnetic type, it can be easily attached without making holes.

TRUSCO NAKAYAMA CORPORATION

레이저 장비 자석의 레모라 P-타입 노브형 타공대　KBZ-PNMB

Can be easily attached to a table or work bench.
Can be easily attached to a table or work bench

TRUSCO NAKAYAMA CORPORATION

후크용 마모라 P 형 스패너　KBZ-PSPF

Attach to KBZ-PMB Can be used on a workbench or attached to KBZ-PMB without drilling.
Can also be attached to punching panel.

TRUSCO NAKAYAMA CORPORATION

후크용 Remora P형 드라이버　KBZ-PDF

Attach to KBZ-PMB Can be used on a workbench or attached to KBZ-PMB without drilling.
Can also be attached to punching panel.

TRUSCO NAKAYAMA CORPORATION

전동드릴 후크의 레모라 P형　KBZ-PDRF

Attach to KBZ-PMB Can be used on a workbench or attached to KBZ-PMB without drilling.
Can also be attached to punching panel.

TRUSCO NAKAYAMA CORPORATION

플라이어 니퍼 훅용 Remora P 유형　KBZ-PNF

Attach to KBZ-PMB Can be used on a workbench or attached to KBZ-PMB without drilling.
Can also be attached to punching panel.

TRUSCO NAKAYAMA CORPORATION

레모라 수지 박스 후크　KBZ-MPS

You can manage small parts with a cup-shaped box.
Since it is magnetic, it can be easily attached without making holes. • Ideal for managing cutters, scissors, pens and small tools. • For managing parts and tools.

TRUSCO NAKAYAMA CORPORATION

자석 막대 모양　KBZ-MB-L

Can be easily attached without drilling holes in metal surfaces such as machine sides and steel columns.
It is easy to see and manage because there is a break.

TRUSCO NAKAYAMA CORPORATION

자석 막대 작게　KBZ-MB-S

Can be easily attached without drilling holes in metal surfaces such as machine sides and steel columns.
Can be connected horizontally.

TRUSCO NAKAYAMA CORPORATION

자석 천공 패널 OP　KBZ-MPM

The maximum load capacity is increased to 8 kg/piece by attaching additional parts to the KBZ-MPP.
Organize and manage tools.

TRUSCO NAKAYAMA CORPORATION

자석 천공 패널　KBZ-MPP

Can be easily attached without drilling holes in metal surfaces such as machine sides and steel columns.
It is suitable for managing various tools by installing the Panelina option and the hook for the Koban shark P-type.

TRUSCO NAKAYAMA CORPORATION

자석 링 후크 큼

TRUSCO NAKAYAMA CORPORATION

라운드용 웨건 바스켓

Snap-on Tools Japan K.K.

Accessory for pruning chisel

TRUSCO NAKAYAMA CORPORATION

레모라 후크 2형 케이블 권선 공통　KBZ-CR

Since it is magnetic, it can be attached easily without making a hole.
Can be stored as a hook as well as wrapped around a cord.

TRUSCO NAKAYAMA CORPORATION

레모라 레진 박스 와이드 타입　KBZ-MPL

Since it is magnetic, it can be attached easily without making a hole.
Can hold two spray cans.

TRUSCO NAKAYAMA CORPORATION

레모라 멀티 박스 홀더　KBZ-PWH

Since it is magnetic, it can be attached easily without making a hole.
Since it is a split type, it can be used for boxes of various sizes.

TRUSCO NAKAYAMA CORPORATION

레모라 멀티 박스 홀더 2 박스　KBZ-PWH2

Since it is magnetic, it can be attached easily without making a hole.
Since it is a split type, it can be used for boxes of various sizes.

TRUSCO NAKAYAMA CORPORATION

레이저 장비의 레모라 티슈 케이스 홀더 3 박스　KBZ-TCH

Since it is magnetic, it can be attached easily without making a hole.
Storage and management of rubber gloves, vinyl gloves and tissue paper.

TRUSCO NAKAYAMA CORPORATION

레이저 장비의 레모라 웨트와이프 홀더　KBZ-WTH

Since it is magnetic, it can be attached easily without making a hole.
Storage and management of wet paper and toilet paper.

O.H.INDUSTRIAL Co., Ltd.

Small Pliers Holder Color: Black

O.H.INDUSTRIAL Co., Ltd.

Airy Holder Blue

O.H.INDUSTRIAL Co., Ltd.

Mini Tool Holder

NIIGATA SEIKI CO., LTD.

마그네행거　MTH-ST

For storing and organizing tools.
You can easily organize tools with the help of magnets.

NIIGATA SEIKI CO., LTD.

자석공구홀더　MTH-460

YUTAKA MAKE Co., Ltd.

공구 홀더 레일 세트

YUTAKA MAKE Co., Ltd.

공구 홀더용 후크　TH-J2

It can be mounted on a dedicated guardrail or by itself. (Single mounting screw holes: 2 Φ4mm diameter screws are ideal.)
Ideal for storing tools with handles.

YUTAKA MAKE Co., Ltd.

공구홀더용 홀더　TH-F2

It can be mounted on a dedicated guardrail or by itself. (Single mounting screw holes: 2 x Φ4mm diameter screws are ideal.)
As long as the thickness is between 15 mm and 50 mm, it can be hooked regardless of material such as wood, metal or plastic.

YUTAKA MAKE Co., Ltd.

공구 홀더 가이드 레일

TRUSCO NAKAYAMA CORPORATION

자석식　KBZ-MF2

You can hang small items on the hook.
For tool management.

ESCO Company Ltd.

도구 홀더[클립용]