MAC EIGHT CO., LTD

Socket-Kun AF Series Insertion Strong Type (100 Roses)　AF-0.5H-B

Material: Beryllium Copper
Treatment: Nickel base gold plating

MAC EIGHT CO., LTD

Press-fit Socket Pin (100 pcs)　PX-1

Material: Beryllium Copper
Treatment: Nickel Underlay Gold Plating

MAC EIGHT CO., LTD

Removable 2-layer heavy-duty OW Series height 3 mm (10 pieces)　OW-3-3-20P

Round pin header (Base height: 3 mm, 20 pins) with 2.54 mm (0.1inch) pitch. A dedicated connector that connects boards directly to each other without using cables. The diameter of the pin is φ0.7 mm and the corresponding socket on the other side is PM-61 type. It is not compatible with jumper post shared type square pin header (about 0.6 mm square) and round pin IC socket (pin diameter around φ0.45 mm) even though the pitch is the same. (Reseat type is a name that distinguishes it from a fixed type pin header for double stacking with both ends soldered to the board.)
Connector Type: Straight

MAC EIGHT CO., LTD

Removable, heavy-duty two-tier OW Series, height 5 mm (10 pieces)　OW-3-5-20P

Round pin header (Base height: 5 mm, 20 pins) with 2.54 mm (0.1inch) pitch. A dedicated connector that connects boards directly to each other without using cables. The diameter of the pin is φ0.7 mm and the corresponding socket on the other side is PM-61 type. It is not compatible with jumper post shared type square pin header (about 0.6 mm square) and round pin IC socket (pin diameter around φ0.45 mm) even though the pitch is the same. (Reseat type is a name that distinguishes it from a fixed type pin header for double stacking with both ends soldered to the board.)
Connector Type: Straight

MAC EIGHT CO., LTD

Removable 2-layer heavy-duty OWW Series height 5 mm (10 pieces)　OWW-3-5-20PW

Connector Type: Straight
Number of Rows: 2

MAC EIGHT CO., LTD

Removable Angle Type Strong Type (10 Pieces)　OWZ-001-20P

Connector Type: Angle
Number of Columns: 1 Row

MAC EIGHT CO., LTD

Ultra-low Socket Pin 2.54 mm pitch ME/MF series (10 pcs)　MF-3-1-20P

MF type is a 2.54 mm (0.1inch) pitch ultra-low back round pin socket (Base height: 2.5 mm, 20 pins). A dedicated connector that connects boards directly to each other without using cables. The pin diameter is φ0.45 mm and the corresponding pin header is MX series. The MX series has various kinds of height, and the board height can be selected on the pin header side. It does not match with the jumper post shared type square pin header (about 0.6 mm square) even if the pitch is the same. Round pin IC socket (pin diameter φ0.45 mm or so) and pin diameter are almost the same. (The manufacturer does not guarantee compatibility.)
Connector type: Straight

MAC EIGHT CO., LTD

Rug Terminal for RG -2 Series M2 (100 pieces)

MAC EIGHT CO., LTD

Consul XB Series for Double Stacking Printed Plates H = 10 mm Pitch 1.27 mm 40 Pin (10 Pins)

MAC EIGHT CO., LTD

Heat radiation sheet 13 x 18 +/- 0.5 mm square Small (100 sheets)　CW3

MAC EIGHT CO., LTD

Heat radiation sheet 20 x 24 mm (100 sheets)　CW4

MAC EIGHT CO., LTD

Insulating flat washer (nylon) for M2 4 phi x 2.1 phi x 0.5 mm (100 sheets)

MAC EIGHT CO., LTD

Insulating flat washer (glass epoxy) for M3 6.0 phi x 3.0 phi (100 sheets)　WG3

MAC EIGHT CO., LTD

Mounting Table without Print Plate Hole SF Series Print Plate Thickness 1.6 mm (100 pieces)　SF1.6

MAC EIGHT CO., LTD

Mounting Table without Print Plate Hole SG Series Print Plate Thickness 1.6 mm (100 pieces)　SG1.6

MAC EIGHT CO., LTD

L-shaped threaded hole for Printed Circuit Board Mounting Bracket M3 (10 pieces)　AXA-15-M3

MAC EIGHT CO., LTD

Printed Circuit Board Mounting Bracket Screw holes M3 & 3.2 phi L-shaped (10 pieces)　AXA-15-M3-3.2

MAC EIGHT CO., LTD

Spacer Hex type for Printed Plates (M3 Type SP Type) 5 mm (100 pieces)

MAC EIGHT CO., LTD

Spacer Hex type for Printed Plates (M2 Type) SP Type 8 mm (100 pieces)

MAC EIGHT CO., LTD

Jumper and Jumper Pitch for Print Board 2.54 mm Black (100 Pieces)　XX-2

MAC EIGHT CO., LTD

Ultra-small Panel check Terminal black (10 pieces)　PN-6-1

MAC EIGHT CO., LTD

Ultra-small Panel check Terminal red (10 pieces)　PN-6-1

MAC EIGHT CO., LTD

For phi 4.2 Mounting Terminal ground Wire for ultra-small Panel check (10 pieces)　PG-1-3

MAC EIGHT CO., LTD

LED Mounting Bracket for Panel (for phi 5) black (10 pieces)

MAC EIGHT CO., LTD

LED Panel Socket (For PHI5) Black (10 pcs)　PP-5-3

MAC EIGHT CO., LTD

Teflon Terminal for Screw Mounting (10 pieces)　FN-1-1

Material: Metal Portion: Brass, Resin Portion: Teflon (UL94V-0) Treatment: Top: Nickel base tin plated, Bottom: Nickel plated Voltage: 2000 V AC, DC1 min. Number of Pieces: 10 Attach to chassis, etc., with screws. Use when attaching parts via wires. The upper and lower metal parts are electrically insulated with Teflon.

MAC EIGHT CO., LTD

Printed plate vertical Mounting block for BA Series M2 (100 pieces)　BA-2-4

Material: Brass
Treatment: Nickel base tin plating

MAC EIGHT CO., LTD

Printed plate vertical Mounting block for BA Series M3 (100 pieces)　BA-3-6

Material: Brass
Treatment: Nickel base tin plating

MAC EIGHT CO., LTD

Eyelet Caking Tools HTX Series　HTX-100

HT series caulking tool.

MAC EIGHT CO., LTD

Socket for LED (10 pcs)　LQ-1

MAC EIGHT CO., LTD

Socket for LED (10 pcs)　LQ-1-0.5

MAC EIGHT CO., LTD

Socket for laser diode (10 pieces)　LQ-203

MAC EIGHT CO., LTD

Socket for laser diode (10 pieces)　LQ-253

MAC EIGHT CO., LTD

Spacer for LED 1 mm (100 pieces)　LM-1

MAC EIGHT CO., LTD

Spacer for LED 2.5 mm (100 pcs)　LM-2.5

MAC EIGHT CO., LTD

Spacer for LED 3 mm (100 pcs)　LM-3

MAC EIGHT CO., LTD

Spacer for LED 3.5 mm (100 pcs)　LM-3.5

MAC EIGHT CO., LTD

Spacer for LED 4 mm (100 pieces)　LM-4

MAC EIGHT CO., LTD

Spacer for LED 5 mm (100 pieces)　LM-5

MAC EIGHT CO., LTD

Spacer for LED 5.5 mm (100 pcs)　LM-5.5