사양

• Received Signal: 0~250 mV DC
• alarm setting
• Anoxia Meter Mode Type II
• For anoximeter mode Type I
• Only the lower limit value can be specified within the range of 18~21%.
• Display range: 0.0~25.0%O2
• Measurement value display: Digital display with 3-digit yellow-green LED
• Display range (resolution): 0.0~25.0 (0.1)%O2
• Accuracy rating: ±0.3%O2±1digit
• DC voltage output
• Used as a power supply for MG2100
• Output voltage: 5 V±0.5 V DC
• Connected Model: 1 MG2100 or MG1000 Series
• Alarm function: Measured value alarm ...
• Alarm Setting Code: Anoxic Meter Mode
• Lower warning value: specified within 18~21%
• Upper warning value: fixed at 26%
• Relay power yes/no: yes
• Buzzer with/without: Yes
• Lamp lit/not lit: yes
• Output holding yes/no: yes
• Power failure warning: When the power supply to the tester is OFF or when the fuse is broken, relay output is ON.
• Alarm relay output: number of output circuits (2), output capacity (Resistive Load 110 V AC 0.2 A, 24 V DC 1 A/Inductive Load 110 V AC 0.1 A, 24 V DC 0.5 A)
• Warm-up time: 5 minutes
• Note)Alarm signal OFF during warm-up
• Operating Temperature Range: 0~40°C
• Operating humidity range: 80%rh or less
• Power: 100 VAC ±10% 50/60Hz
• Power Consumption
• Approx. 5VA for the main body only (when DC voltage output is unloaded)
• Approx. 8.5VA when used in combination with MG2100 series
• Weight: about 500 g
• Mounting method: wall or switchbox mounting
• ISO 14001 Certified JQA-EM2414
• ISO 9001 Certification JQA-0656
•