61-1346-21 GP Carbide Drill (ALT Coating, Biasa, Φ0.59 Blade length 6 × Total panjang 40mm) GPDR059CBALT
Fitur
- Carbide small-diameter coating drill with ultra-high speed, long life, and hole drilling realized by unique cutting edge shape (patented: Patent No. 5800477) and groove shape.
- The two-step angle at the tip significantly reduces shoulder wear and blurring compared to conventional drills, and greatly improves performance not only in high-speed use.
- The unique groove shape significantly increases the efficiency of chip removal during high feed, and also prevents breakage of the drill due to shoulder chipping, not only during high-speed use.
- Work Material: Carbon Steel, Alloy Steel, Stainless Steel, Mild Steel, Tempered Steel, Cast Iron, Tag Tile Cast Iron, Tool Steel (~HRC40), Titanium Alloy.
Spec
- Diameter pedang (mm): 0,59
- panjang-seruling (mm): 6
- Panjang (mm): 40
- Diameter gula (mm): 3
- Permukaan perawatan: Pelapis ALT
- Kedalaman Pemrosesan Efektif: 10D (diameter pisau x 10 kali)
- Alokasi Karbide (carbide)
- Aplikasi: bagian kerja: Baja karbon, baja paduan, baja Stainless, baja ringan, baja, besi Cast, besi beton, besi baja Carbon (HRC40), logam Titanium.
- Negara asal: Jepang
- Nomor model produsen: GPDR0 59 KBALT
- KODE No.: 475-1001
Ukuran paket：12×68×11 mm 10 g [Tentang Ukuran Paket]
| Perintah No. | 61-1346-21 | |
|---|---|---|
| Model No. | GPDR059CBALT | |
| Kode JAN | 4562186864754 | |
| Harga standar |
JPY: 5,150
USD: 32.28
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. |
Blade diameter |
Groove length |
Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1345-91 | GP Carbide Drill (ALT Coating, Reguler, Φ0.3 Blade length 3,6 x Total panjang 40mm) GPDR03CBALT | GPDR03CBALT | 0.3mm | 3.6mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1345-92 | GP Carbide Drill (ALT Coating, Reguler, Φ0.31 Blade length 3,6 x Total panjang 40mm) GPDR031CBALT | GPDR031CBALT | 0.31mm | 3.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-93 | GP Carbide Drill (ALT Coating, Reguler, Φ0.32 Blade length 3,6 x Total panjang 40mm) GPDR032CBALT | GPDR032CBALT | 0.32mm | 3.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-94 | GP Carbide Drill (ALT Coating, Reguler, Φ0.33 Blade length 3,6 x Total panjang 40mm) GPDR033CBALT | GPDR033CBALT | 0.33mm | 3.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-95 | GP Carbide Drill (ALT Coating, Reguler, Φ0.34 Blade length 3,6 x Total panjang 40mm) GPDR034CBALT | GPDR034CBALT | 0.34mm | 3.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-96 | GP Carbide Drill (ALT Coating, Reguler, Φ0.35 Blade length 4,2 x Total panjang 40mm) GPDR035CBALT | GPDR035CBALT | 0.35mm | 4.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-97 | GP Carbide Drill (ALT Coating, Reguler, Φ0.36 Blade length 4,2 x Total panjang 40mm) GPDR036CBALT | GPDR036CBALT | 0.36mm | 4.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-98 | GP Carbide Drill (ALT Coating, Reguler, Φ0.37 Blade length 4,2 x Total panjang 40mm) GPDR037CBALT | GPDR037CBALT | 0.37mm | 4.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-99 | GP Carbide Drill (ALT Coating, Reguler, Φ0.38 Blade length 4,2 x Total panjang 40mm) GPDR038CBALT | GPDR038CBALT | 0.38mm | 4.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-01 | GP Carbide Drill (ALT Coating, Reguler, Φ0.39 Blade length 4,2 x Total panjang 40mm) GPDR039CBALT | GPDR039CBALT | 0.39mm | 4.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-02 | GP Carbide Drill (ALT Coating, Reguler, Φ0.4 Blade length 4,8 x Total panjang 40mm) GPDR04CBALT | GPDR04CBALT | 0.4mm | 4.8mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-03 | GP Carbide Drill (ALT Coating, Reguler, Φ0.41 Blade length 4,8 x Total panjang 40mm) GPDR041CBALT | GPDR041CBALT | 0.41mm | 4.8mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-04 | GP Carbide Drill (ALT Coating, Reguler, Φ0.42 Blade length 4,8 x Total panjang 40mm) GPDR042CBALT | GPDR042CBALT | 0.42mm | 4.8mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-05 | GP Carbide Drill (ALT Coating, Reguler, Φ0.43 Blade length 4,8 x Total panjang 40mm) GPDR043CBALT | GPDR043CBALT | 0.43mm | 4.8mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-06 | GP Carbide Drill (ALT Coating, Reguler, Φ0.44 Blade length 4,8 x Total panjang 40mm) GPDR044CBALT | GPDR044CBALT | 0.44mm | 4.8mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-07 | GP Carbide Drill (ALT Coating, Reguler, Φ0.45 Blade length 5,4 x Total panjang 40mm) GPDR045CBALT | GPDR045CBALT | 0.45mm | 5.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-08 | GP Carbide Drill (ALT Coating, Reguler, Φ0.46 Blade length 5,4 x Total panjang 40mm) GPDR046CBALT | GPDR046CBALT | 0.46mm | 5.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-09 | GP Carbide Drill (ALT Coating, Reguler, Φ0.47 Blade length 5,4 x Total panjang 40mm) GPDR047CBALT | GPDR047CBALT | 0.47mm | 5.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-10 | GP Carbide Drill (ALT Coating, Reguler, Φ0.48 Blade length 5,4 x Total panjang 40mm) GPDR048CBALT | GPDR048CBALT | 0.48mm | 5.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-11 | GP Carbide Drill (ALT Coating, Reguler, Φ0.49 Blade length 5,4 x Total panjang 40mm) GPDR049CBALT | GPDR049CBALT | 0.49mm | 5.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-12 | GP Carbide Drill (ALT Coating, Biasa, Φ0.5 Blade length 6 × Total panjang 40mm) GPDR05CBALT | GPDR05CBALT | 0.5mm | 6mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1346-13 | GP Carbide Drill (ALT Coating, Biasa, Φ0.51 Blade length 6 × Total panjang 40mm) GPDR051CBALT | GPDR051CBALT | 0.51mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-14 | GP Carbide Drill (ALT Coating, Biasa, Φ0.52 Blade length 6 × Total panjang 40mm) GPDR052CBALT | GPDR052CBALT | 0.52mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-15 | GP Carbide Drill (ALT Coating, Biasa, Φ0.53 Blade length 6 × Total panjang 40mm) GPDR053CBALT | GPDR053CBALT | 0.53mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-16 | GP Carbide Drill (ALT Coating, Biasa, Φ0.54 Blade length 6 × Total panjang 40mm) GPDR054CBALT | GPDR054CBALT | 0.54mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-17 | GP Carbide Drill (ALT Coating, Biasa, Φ0.55 Blade length 6 × Total panjang 40mm) GPDR055CBALT | GPDR055CBALT | 0.55mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-18 | GP Carbide Drill (ALT Coating, Biasa, Φ0.56 Blade length 6 × Total panjang 40mm) GPDR056CBALT | GPDR056CBALT | 0.56mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-19 | GP Carbide Drill (ALT Coating, Biasa, Φ0.57 Blade length 6 × Total panjang 40mm) GPDR057CBALT | GPDR057CBALT | 0.57mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-20 | GP Carbide Drill (ALT Coating, Biasa, Φ0.58 Blade length 6 × Total panjang 40mm) GPDR058CBALT | GPDR058CBALT | 0.58mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-21 | GP Carbide Drill (ALT Coating, Biasa, Φ0.59 Blade length 6 × Total panjang 40mm) GPDR059CBALT | GPDR059CBALT | 0.59mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-22 | GP Carbide Drill (ALT Coating, Reguler, Φ0.6 Blade length 7.2 x Total panjang 40mm) GPDR06CBALT | GPDR06CBALT | 0.6mm | 7.2mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1346-23 | GP Carbide Drill (ALT Coating, Reguler, Φ0.61 Blade length 7.2 x Total panjang 40mm) GPDR061CBALT | GPDR061CBALT | 0.61mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-24 | GP Carbide Drill (ALT Coating, Reguler, Φ0.62 Blade length 7.2 x Total panjang 40mm) GPDR062CBALT | GPDR062CBALT | 0.62mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-25 | GP Carbide Drill (ALT Coating, Reguler, Φ0.63 Blade length 7.2 x Total panjang 40mm) GPDR063CBALT | GPDR063CBALT | 0.63mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-26 | GP Carbide Drill (ALT Coating, Reguler, Φ0.64 Blade length 7.2 x Total panjang 40mm) GPDR064CBALT | GPDR064CBALT | 0.64mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-27 | GP Carbide Drill (ALT Coating, Reguler, Φ0.65 Blade length 7.2 x Total panjang 40mm) GPDR065CBALT | GPDR065CBALT | 0.65mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-28 | GP Carbide Drill (ALT Coating, Reguler, Φ0.66 Blade length 7.2 x Total panjang 40mm) GPDR066CBALT | GPDR066CBALT | 0.66mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-29 | GP Carbide Drill (ALT Coating, Reguler, Φ0.67 Blade length 7.2 x Total panjang 40mm) GPDR067CBALT | GPDR067CBALT | 0.67mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-30 | GP Carbide Drill (ALT Coating, Reguler, Φ0.68 Blade length 7.2 x Total panjang 40mm) GPDR068CBALT | GPDR068CBALT | 0.68mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-31 | GP Carbide Drill (ALT Coating, Reguler, Φ0.69 Blade length 7.2 x Total panjang 40mm) GPDR069CBALT | GPDR069CBALT | 0.69mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-32 | GP Carbide Drill (ALT Coating, Reguler, Φ0.7 Blade length 8.4 x Total panjang 40mm) GPDR07CBALT | GPDR07CBALT | 0.7mm | 8.4mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1346-33 | GP Carbide Drill (ALT Coating, Reguler, Φ0.71 Blade length 8.4 x Total panjang 40mm) GPDR071CBALT | GPDR071CBALT | 0.71mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-34 | GP Carbide Drill (ALT Coating, Reguler, Φ0.72 Blade length 8.4 x Total panjang 40mm) GPDR072CBALT | GPDR072CBALT | 0.72mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-35 | GP Carbide Drill (ALT Coating, Reguler, Φ0.73 Blade length 8.4 x Total panjang 40mm) GPDR073CBALT | GPDR073CBALT | 0.73mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-36 | GP Carbide Drill (ALT Coating, Reguler, Φ0.74 Blade length 8.4 x Total panjang 40mm) GPDR074CBALT | GPDR074CBALT | 0.74mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-37 | GP Carbide Drill (ALT Coating, Reguler, Φ0.75 Blade length 8.4 x Total panjang 40mm) GPDR075CBALT | GPDR075CBALT | 0.75mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-38 | GP Carbide Drill (ALT Coating, Reguler, Φ0.76 Blade length 8.4 x Total panjang 40mm) GPDR076CBALT | GPDR076CBALT | 0.76mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-39 | GP Carbide Drill (ALT Coating, Reguler, Φ0.77 Blade length 8.4 x Total panjang 40mm) GPDR077CBALT | GPDR077CBALT | 0.77mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-40 | GP Carbide Drill (ALT Coating, Reguler, Φ0.78 Blade length 8.4 x Total panjang 40mm) GPDR078CBALT | GPDR078CBALT | 0.78mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-41 | GP Carbide Drill (ALT Coating, Reguler, Φ0.79 Blade length 8.4 x Total panjang 40mm) GPDR079CBALT | GPDR079CBALT | 0.79mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-42 | GP Carbide Drill (ALT Coating, Reguler, Φ0.8 Blade length 9,6 x Total panjang 40mm) GPDR08CBALT | GPDR08CBALT | 0.8mm | 9.6mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1346-43 | GP Carbide Drill (ALT Coating, Reguler, Φ0.81 Blade length 9,6 x Total panjang 40mm) GPDR081CBALT | GPDR081CBALT | 0.81mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-44 | GP Carbide Drill (ALT Coating, Reguler, Φ0.82 Blade length 9,6 x Total panjang 40mm) GPDR082CBALT | GPDR082CBALT | 0.82mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-45 | GP Carbide Drill (ALT Coating, Reguler, Φ0.83 Blade length 9,6 x Total panjang 40mm) GPDR083CBALT | GPDR083CBALT | 0.83mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-46 | GP Carbide Drill (ALT Coating, Reguler, Φ0.84 Blade length 9,6 x Total panjang 40mm) GPDR084CBALT | GPDR084CBALT | 0.84mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-47 | GP Carbide Drill (ALT Coating, Reguler, Φ0.85 Blade length 9,6 x Total panjang 40mm) GPDR085CBALT | GPDR085CBALT | 0.85mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-48 | GP Carbide Drill (ALT Coating, Reguler, Φ0.86 Blade length 9,6 x Total panjang 40mm) GPDR086CBALT | GPDR086CBALT | 0.86mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-49 | GP Carbide Drill (ALT Coating, Reguler, Φ0.87 Blade length 9,6 x Total panjang 40mm) GPDR087CBALT | GPDR087CBALT | 0.87mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-50 | GP Carbide Drill (ALT Coating, Reguler, Φ0.88 Blade length 9,6 x Total panjang 40mm) GPDR088CBALT | GPDR088CBALT | 0.88mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-51 | GP Carbide Drill (ALT Coating, Reguler, Φ0.89 Blade length 9,6 x Total panjang 40mm) GPDR089CBALT | GPDR089CBALT | 0.89mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-52 | GP Carbide Drill (ALT Coating, Biasa, Φ0.9 Blade Panjang 10,8 x Total panjang 40mm) GPDR09CBALT | GPDR09CBALT | 0.9mm | 10.8mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1346-53 | GP Carbide Drill (ALT Coating, Biasa, Φ0.91 Blade Panjang 10,8 x Total panjang 40mm) GPDR091CBALT | GPDR091CBALT | 0.91mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-54 | GP Carbide Drill (ALT Coating, Biasa, Φ0.92 Blade Panjang 10,8 x Total panjang 40mm) GPDR092CBALT | GPDR092CBALT | 0.92mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-55 | GP Carbide Drill (ALT Coating, Biasa, Φ0.93 Blade Panjang 10,8 x Total panjang 40mm) GPDR093CBALT | GPDR093CBALT | 0.93mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-56 | GP Carbide Drill (ALT Coating, Biasa, Φ0.94 Blade Panjang 10,8 x Total panjang 40mm) GPDR094CBALT | GPDR094CBALT | 0.94mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-57 | GP Carbide Drill (ALT Coating, Biasa, Φ0.95 Blade Panjang 10,8 x Total panjang 40mm) GPDR095CBALT | GPDR095CBALT | 0.95mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-58 | GP Carbide Drill (ALT Coating, Biasa, Φ0.96 Blade Panjang 10,8 x Total panjang 40mm) GPDR096CBALT | GPDR096CBALT | 0.96mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-59 | GP Carbide Drill (ALT Coating, Biasa, Φ0.97 Blade Panjang 10,8 x Total panjang 40mm) GPDR097CBALT | GPDR097CBALT | 0.97mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-60 | GP Carbide Drill (ALT Coating, Biasa, Φ0.98 Blade Panjang 10,8 x Total panjang 40mm) GPDR098CBALT | GPDR098CBALT | 0.98mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-61 | GP Carbide Drill (ALT Coating, Biasa, Φ0.99 Blade Panjang 10,8 x Total panjang 40mm) GPDR099CBALT | GPDR099CBALT | 0.99mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-62 | GP Carbide Drill (ALT Coating, Reguler, Φ1.0 Blade length 12 x Total panjang 50mm) GPDR1CBALT | GPDR1CBALT | 1mm | 12mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1346-63 | GP Carbide Drill (ALT Coating, Reguler, Φ1.05 Blade length 12 x Total panjang 50mm) GPDR105CBALT | GPDR105CBALT | 1.05mm | 12mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-64 | GP Carbide Drill (ALT Coating, Reguler, Φ1.1 Blade length 12 x Total panjang 50mm) GPDR11CBALT | GPDR11CBALT | 1.1mm | 12mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-65 | GP Carbide Drill (ALT Coating, Reguler, Φ1.15 Blade length 12 x Total panjang 50mm) GPDR115CBALT | GPDR115CBALT | 1.15mm | 12mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-66 | GP Carbide Drill (ALT Coating, Reguler, Φ1.2 Blade length 14,4 x Total panjang 50mm) GPDR12CBALT | GPDR12CBALT | 1.2mm | 14.4mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-67 | GP Carbide Drill (ALT Coating, Reguler, Φ1.25 Blade length 14,4 x Total panjang 50mm) GPDR125CBALT | GPDR125CBALT | 1.25mm | 14.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-68 | GP Carbide Drill (ALT Coating, Reguler, Φ1.3 Blade length 14,4 x Total panjang 50mm) GPDR13CBALT | GPDR13CBALT | 1.3mm | 14.4mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-69 | GP Carbide Drill (ALT Coating, Reguler, Φ1.35 Blade length 14,4 x Total panjang 50mm) GPDR135CBALT | GPDR135CBALT | 1.35mm | 14.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-70 | GP Carbide Drill (ALT Coating, Reguler, Φ1.4 Blade length 16,8 x Total panjang 50mm) GPDR14CBALT | GPDR14CBALT | 1.4mm | 16.8mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-71 | GP Carbide Drill (ALT Coating, Reguler, Φ1.45 Blade length 16,8 x Total panjang 50mm) GPDR145CBALT | GPDR145CBALT | 1.45mm | 16.8mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-72 | GP Carbide Drill (ALT Coating, Reguler, Φ1.5 Blade length 16,8 x Total panjang 50mm) GPDR15CBALT | GPDR15CBALT | 1.5mm | 16.8mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-73 | GP Carbide Drill (ALT Coating, Reguler, Φ1.55 Blade length 16,8 x Total panjang 50mm) GPDR155CBALT | GPDR155CBALT | 1.55mm | 16.8mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-74 | GP Carbide Drill (ALT Coating, Reguler, Φ1.6 Blade length 19,2 x Total panjang 50mm) GPDR16CBALT | GPDR16CBALT | 1.6mm | 19.2mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-75 | GP Carbide Drill (ALT Coating, Reguler, Φ1.65 Blade length 19,2 x Total panjang 50mm) GPDR165CBALT | GPDR165CBALT | 1.65mm | 19.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-76 | GP Carbide Drill (ALT Coating, Reguler, Φ1.7 Blade length 19,2 x Total panjang 50mm) GPDR17CBALT | GPDR17CBALT | 1.7mm | 19.2mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-77 | GP Carbide Drill (ALT Coating, Reguler, Φ1.75 Blade length 19,2 x Total panjang 50mm) GPDR175CBALT | GPDR175CBALT | 1.75mm | 19.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-78 | GP Carbide Drill (ALT Coating, Reguler, Φ1.8 Blade length 21,6 x Total panjang 50mm) GPDR18CBALT | GPDR18CBALT | 1.8mm | 21.6mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-79 | GP Carbide Drill (ALT Coating, Reguler, Φ1.85 Blade length 21,6 x Total panjang 50mm) GPDR185CBALT | GPDR185CBALT | 1.85mm | 21.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-80 | GP Carbide Drill (ALT Coating, Reguler, Φ1.9 Blade length 21,6 x Total panjang 50mm) GPDR19CBALT | GPDR19CBALT | 1.9mm | 21.6mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-81 | GP Carbide Drill (ALT Coating, Reguler, Φ1.95 Blade length 21,6 x Total panjang 50mm) GPDR195CBALT | GPDR195CBALT | 1.95mm | 21.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-82 | GP Carbide Drill (ALT Coating, Reguler, Φ2.0 Blade length 24 x Total panjang 60mm) GPDR2CBALT | GPDR2CBALT | 2mm | 24mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-83 | GP Carbide Drill (ALT Coating, Reguler, Φ2.05 Blade length 24 x Total panjang 60mm) GPDR205CBALT | GPDR205CBALT | 2.05mm | 24mm | 1piece | JPY: 6,180 | USD: 38.74 |
|
|
 |
61-1346-84 | GP Carbide Drill (ALT Coating, Reguler, Φ2.1 Blade length 24 x Total panjang 60mm) GPDR21CBALT | GPDR21CBALT | 2.1mm | 24mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-85 | GP Carbide Drill (ALT Coating, Reguler, Φ2.15 Blade length 24 x Total panjang 60mm) GPDR215CBALT | GPDR215CBALT | 2.15mm | 24mm | 1piece | JPY: 6,180 | USD: 38.74 |
|
|
 |
61-1346-86 | GP Carbide Drill (ALT Coating, Reguler, Φ2.2 Blade length 24 x Total panjang 60mm) GPDR22CBALT | GPDR22CBALT | 2.2mm | 24mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-87 | GP Carbide Drill (ALT Coating, Reguler, Φ2.25 Blade length 24 x Total panjang 60mm) GPDR225CBALT | GPDR225CBALT | 2.25mm | 24mm | 1piece | JPY: 6,180 | USD: 38.74 |
|
|
 |
61-1346-88 | GP Carbide Drill (ALT Coating, Reguler, Φ2.3 Blade length 27,6 x Total panjang 60mm) GPDR23CBALT | GPDR23CBALT | 2.3mm | 27.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-89 | GP Carbide Drill (ALT Coating, Reguler, Φ2.35 Blade length 27,6 x Total panjang 60mm) GPDR235CBALT | GPDR235CBALT | 2.35mm | 27.6mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1346-90 | GP Carbide Drill (ALT Coating, Reguler, Φ2.4 Blade length 27,6 x Total panjang 60mm) GPDR24CBALT | GPDR24CBALT | 2.4mm | 27.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-91 | GP Carbide Drill (ALT Coating, Reguler, Φ2.45 Blade length 27,6 x Total panjang 60mm) GPDR245CBALT | GPDR245CBALT | 2.45mm | 27.6mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1346-92 | GP Carbide Drill (ALT Coating, Reguler, Φ2.5 Blade length 27,6 x Total panjang 60mm) GPDR25CBALT | GPDR25CBALT | 2.5mm | 27.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-93 | GP Carbide Drill (ALT Coating, Reguler, Φ2.55 Blade length 27,6 x Total panjang 60mm) GPDR255CBALT | GPDR255CBALT | 2.55mm | 27.6mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1346-94 | GP Carbide Drill (ALT Coating, Reguler, Φ2.6 Blade length 31,2 x Total panjang 60mm) GPDR26CBALT | GPDR26CBALT | 2.6mm | 31.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-95 | GP Carbide Drill (ALT Coating, Reguler, Φ2.65 Blade length 31,2 x Total panjang 60mm) GPDR265CBALT | GPDR265CBALT | 2.65mm | 31.2mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1346-96 | GP Carbide Drill (ALT Coating, Reguler, Φ2.7 Blade length 31,2 x Total panjang 60mm) GPDR27CBALT | GPDR27CBALT | 2.7mm | 31.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-97 | GP Carbide Drill (ALT Coating, Reguler, Φ2.75 Blade length 31,2 x Total panjang 60mm) GPDR275CBALT | GPDR275CBALT | 2.75mm | 31.2mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1346-98 | GP Carbide Drill (ALT Coating, Reguler, Φ2.8 Blade length 33,6 x Total panjang 60mm) GPDR28CBALT | GPDR28CBALT | 2.8mm | 33.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-99 | GP Carbide Drill (ALT Coating, Reguler, Φ2.85 Blade length 33,6 x Total panjang 60mm) GPDR285CBALT | GPDR285CBALT | 2.85mm | 33.6mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1347-01 | GP Carbide Drill (ALT Coating, Reguler, Φ2.9 Blade length 33,6 x Total panjang 60mm) GPDR29CBALT | GPDR29CBALT | 2.9mm | 33.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1347-02 | GP Carbide Drill (ALT Coating, Reguler, Φ2.95 Blade length 33,6 x Total panjang 60mm) GPDR295CBALT | GPDR295CBALT | 2.95mm | 33.6mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1347-03 | GP Carbide Drill (ALT Coating, Reguler, Φ3.0 Blade length 36 x Total panjang 60mm) GPDR3CBALT | GPDR3CBALT | 3mm | 36mm | 1piece | JPY: 5,150 | USD: 32.28 |
|