61-1311-13 T Slot Endmill (HSS, Φ18 Blade panjang 8 x Neck diameter: 8,0) TSE18X8
Fitur
- T-slot end mill developed for aluminum processing.
- It can be used not only for aluminum processing but also for other non-ferrous metals, ordinary steel and alloy steel.
- Since the blade groove part is taken deep against the twist angle of 30°, smooth discharge of chips is possible.
- Eccentric blades greatly improve surface roughness.
- It is also ideal for heavy cutting, which cannot be obtained with ordinary end mills for aluminum.
- One blade hits well with odd blades (5), and eccentricity during cutting is minimal.
- Work Material: Aluminum, non-ferrous metal, plain steel, alloy steel.
Spec
- Diameter pedang (mm): 18
- panjang bilah (mm): 8
- diameter leher (mm): 8,0
- kepala (mm): 22
- Panjang (mm): 120
- Diameter gula (mm): 16
- Massa (G): 155
- Baja Kecepatan Tinggi (SKH56)
- Aplikasi: bagian kerja: Aluminium, logam bukan ferrous, baja, baja paduan.
- Negara asal: Jepang
- Berat: 155 g
- Nomor model produsen: TSE18X8
- KODE No.: 261-4308
Ukuran paket：24×124×24 mm 170 g [Tentang Ukuran Paket]
| Perintah No. | 61-1311-13 | |
|---|---|---|
| Model No. | TSE18X8 | |
| Kode JAN | 4571115520241 | |
| Harga standar |
JPY: 20,820
USD: 129.54
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. |
Total length (mm) |
Shank diameter (mm) |
Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1310-99 | T Slot Endmill (HSS, Φ15 Blade length 5 × Neck diameter: 6,0) TSE15X5 | TSE15X5 | 115 | 16 | 1piece | JPY: 18,380 | USD: 114.36 |
|
|
 |
61-1311-01 | T Slot Endmill (HSS, Φ15 Blade panjang 6 x Neck diameter: 6,0) TSE15X6 | TSE15X6 | 115 | 16 | 1piece | JPY: 18,380 | USD: 114.36 |
|
|
 |
61-1311-02 | T Slot Endmill (HSS, Φ15 Blade length 7 × Neck diameter: 6,0) TSE15X7 | TSE15X7 | 115 | 16 | 1piece | JPY: 18,380 | USD: 114.36 |
|
|
 |
61-1311-03 | T Slot Endmill (HSS, Φ15 Blade panjang 8 x Neck diameter: 6,0) TSE15X8 | TSE15X8 | 115 | 16 | 1piece | JPY: 18,380 | USD: 114.36 |
|
|
 |
61-1311-04 | T Slot Endmill (HSS, Φ15 Blade panjang 10 x Neck diameter: 6,0) TSE15X10 | TSE15X10 | 115 | 16 | 1piece | JPY: 18,380 | USD: 114.36 |
|
|
 |
61-1311-05 | T Slot Endmill (HSS, Φ16 Blade length 5 × Neck diameter: 7,0) TSE16X5 | TSE16X5 | 115 | 16 | 1piece | JPY: 18,940 | USD: 117.85 |
|
|
 |
61-1311-06 | T Slot Endmill (HSS, Φ16 Blade panjang 6 x Neck diameter: 7,0) TSE16X6 | TSE16X6 | 115 | 16 | 1piece | JPY: 18,940 | USD: 117.85 |
|
|
 |
61-1311-07 | T Slot Endmill (HSS, Φ16 Blade length 7 × Neck diameter: 7,0) TSE16X7 | TSE16X7 | 115 | 16 | 1piece | JPY: 18,940 | USD: 117.85 |
|
|
 |
61-1311-08 | T Slot Endmill (HSS, Φ16 Blade panjang 8 x Neck diameter: 7,0) TSE16X8 | TSE16X8 | 115 | 16 | 1piece | JPY: 18,940 | USD: 117.85 |
|
|
 |
61-1311-09 | T Slot Endmill (HSS, Φ16 Blade panjang 10 x Neck diameter: 7,0) TSE16X10 | TSE16X10 | 115 | 16 | 1piece | JPY: 18,940 | USD: 117.85 |
|
|
 |
61-1311-10 | T Slot Endmill (HSS, Φ18 Blade length 5 × Neck diameter: 8,0) TSE18X5 | TSE18X5 | 120 | 16 | 1piece | JPY: 20,820 | USD: 129.54 |
|
|
 |
61-1311-11 | T Slot Endmill (HSS, Φ18 Blade panjang 6 x Neck diameter: 8,0) TSE18X6 | TSE18X6 | 120 | 16 | 1piece | JPY: 20,820 | USD: 129.54 |
|
|
 |
61-1311-12 | T Slot Endmill (HSS, Φ18 Blade length 7 × Neck diameter: 8,0) TSE18X7 | TSE18X7 | 120 | 16 | 1piece | JPY: 20,820 | USD: 129.54 |
|
|
 |
61-1311-13 | T Slot Endmill (HSS, Φ18 Blade panjang 8 x Neck diameter: 8,0) TSE18X8 | TSE18X8 | 120 | 16 | 1piece | JPY: 20,820 | USD: 129.54 |
|
|
 |
61-1311-14 | T Slot Endmill (HSS, Φ18 Blade panjang 10 x Neck diameter: 8,0) TSE18X10 | TSE18X10 | 120 | 16 | 1piece | JPY: 20,820 | USD: 129.54 |
|
|
 |
61-1311-15 | T Slot Endmill (HSS, Φ20 Blade length 5 × Neck diameter: 9,0) TSE20X5 | TSE20X5 | 120 | 16 | 1piece | JPY: 22,690 | USD: 141.18 |
|
|
 |
61-1311-16 | T Slot Endmill (HSS, Φ20 Blade panjang 6 x Neck diameter: 9,0) TSE20X6 | TSE20X6 | 120 | 16 | 1piece | JPY: 22,690 | USD: 141.18 |
|
|
 |
61-1311-17 | T Slot Endmill (HSS, Φ20 Blade length 7 × Neck diameter: 9,0) TSE20X7 | TSE20X7 | 120 | 16 | 1piece | JPY: 22,690 | USD: 141.18 |
|
|
 |
61-1311-18 | T Slot Endmill (HSS, Φ20 Blade panjang 8 x Neck diameter: 9,0) TSE20X8 | TSE20X8 | 120 | 16 | 1piece | JPY: 22,690 | USD: 141.18 |
|
|
 |
61-1311-19 | T Slot Endmill (HSS, Φ20 Blade panjang 10 x Neck diameter: 9,0) TSE20X10 | TSE20X10 | 120 | 16 | 1piece | JPY: 22,690 | USD: 141.18 |
|
|
 |
61-1311-20 | T Slot Endmill (HSS, Φ22 Blade length 5 × Neck diameter: 9,5) TSE22X5 | TSE22X5 | 120 | 16 | 1piece | JPY: 25,220 | USD: 156.92 |
|
|
 |
61-1311-21 | T Slot Endmill (HSS, Φ22 Blade panjang 6 x Neck diameter: 9,5) TSE22X6 | TSE22X6 | 120 | 16 | 1piece | JPY: 25,220 | USD: 156.92 |
|
|
 |
61-1311-22 | T Slot Endmill (HSS, Φ22 Blade length 7 × Neck diameter: 9,5) TSE22X7 | TSE22X7 | 120 | 16 | 1piece | JPY: 25,220 | USD: 156.92 |
|
|
 |
61-1311-23 | T Slot Endmill (HSS, Φ22 Blade panjang 8 x Neck diameter: 9,5) TSE22X8 | TSE22X8 | 120 | 16 | 1piece | JPY: 25,220 | USD: 156.92 |
|
|
 |
61-1311-24 | T Slot Endmill (HSS, Φ22 Blade panjang 10 x Neck diameter: 9,5) TSE22X10 | TSE22X10 | 120 | 16 | 1piece | JPY: 25,220 | USD: 156.92 |
|
|
 |
61-1311-25 | T Slot Endmill (HSS, Φ22 Blade panjang 12 x Neck diameter: 9,5) TSE22X12 | TSE22X12 | 120 | 16 | 1piece | JPY: 26,630 | USD: 165.69 |
|
|
 |
61-1311-26 | T Slot Endmill (HSS, Φ24 Blade length 5 × Neck diameter: 10,0) TSE24X5 | TSE24X5 | 125 | 16 | 1piece | JPY: 29,630 | USD: 184.36 |
|
|
 |
61-1311-27 | T Slot Endmill (HSS, Φ24 Blade panjang 6 x Neck diameter: 10,0) TSE24X6 | TSE24X6 | 125 | 16 | 1piece | JPY: 29,630 | USD: 184.36 |
|
|
 |
61-1311-28 | T Slot Endmill (HSS, Φ24 Blade length 7 × Neck diameter: 10,0) TSE24X7 | TSE24X7 | 125 | 16 | 1piece | JPY: 29,630 | USD: 184.36 |
|
|
 |
61-1311-29 | T Slot Endmill (HSS, Φ24 Blade panjang 8 x Neck diameter: 10,0) TSE24X8 | TSE24X8 | 125 | 16 | 1piece | JPY: 29,630 | USD: 184.36 |
|
|
 |
61-1311-30 | T Slot Endmill (HSS, Φ24 Blade panjang 10 x Neck diameter: 10,0) TSE24X10 | TSE24X10 | 125 | 16 | 1piece | JPY: 29,630 | USD: 184.36 |
|
|
 |
61-1311-31 | T Slot Endmill (HSS, Φ24 Blade panjang 12 x Neck diameter: 10,0) TSE24X12 | TSE24X12 | 125 | 16 | 1piece | JPY: 30,940 | USD: 192.51 |
|
|
 |
61-1311-32 | T Slot Endmill (HSS, Φ25 Blade length 5 × Neck diameter: 11,0) TSE25X5 | TSE25X5 | 125 | 16 | 1piece | JPY: 29,630 | USD: 184.36 |
|
|
 |
61-1311-33 | T Slot Endmill (HSS, Φ25 Blade panjang 6 x Neck diameter: 11,0) TSE25X6 | TSE25X6 | 125 | 16 | 1piece | JPY: 29,630 | USD: 184.36 |
|
|
 |
61-1311-34 | T Slot Endmill (HSS, Φ25 Blade length 7 × Neck diameter: 11,0) TSE25X7 | TSE25X7 | 125 | 16 | 1piece | JPY: 29,630 | USD: 184.36 |
|
|
 |
61-1311-35 | T Slot Endmill (HSS, Φ25 Blade panjang 8 x Neck diameter: 11,0) TSE25X8 | TSE25X8 | 125 | 16 | 1piece | JPY: 29,630 | USD: 184.36 |
|
|
 |
61-1311-36 | T Slot Endmill (HSS, Φ25 Blade panjang 10 x Neck diameter: 11,0) TSE25X10 | TSE25X10 | 125 | 16 | 1piece | JPY: 29,630 | USD: 184.36 |
|
|
 |
61-1311-37 | T Slot Endmill (HSS, Φ25 Blade panjang 12 x Neck diameter: 11,0) TSE25X12 | TSE25X12 | 125 | 16 | 1piece | JPY: 30,940 | USD: 192.51 |
|
|
 |
61-1311-38 | T Slot Endmill (HSS, Φ25 Blade panjang 15 x Neck diameter: 11,0) TSE25X15 | TSE25X15 | 125 | 16 | 1piece | JPY: 30,940 | USD: 192.51 |
|
|
 |
61-1311-39 | T Slot Endmill (HSS, Φ26 Blade length 5 × Neck diameter: 11,0) TSE26X5 | TSE26X5 | 125 | 16 | 1piece | JPY: 35,070 | USD: 218.21 |
|
|
 |
61-1311-40 | T Slot Endmill (HSS, Φ26 Blade panjang 6 x Neck diameter: 11,0) TSE26X6 | TSE26X6 | 125 | 16 | 1piece | JPY: 35,070 | USD: 218.21 |
|
|
 |
61-1311-41 | T Slot Endmill (HSS, Φ26 Blade length 7 × Neck diameter: 11,0) TSE26X7 | TSE26X7 | 125 | 16 | 1piece | JPY: 35,070 | USD: 218.21 |
|
|
 |
61-1311-42 | T Slot Endmill (HSS, Φ26 Blade panjang 8 x Neck diameter: 11,0) TSE26X8 | TSE26X8 | 125 | 16 | 1piece | JPY: 35,070 | USD: 218.21 |
|
|
 |
61-1311-43 | T Slot Endmill (HSS, Φ26 Blade panjang 10 x Neck diameter: 11,0) TSE26X10 | TSE26X10 | 125 | 16 | 1piece | JPY: 35,070 | USD: 218.21 |
|
|
 |
61-1311-44 | T Slot Endmill (HSS, Φ26 Blade panjang 12 x Neck diameter: 11,0) TSE26X12 | TSE26X12 | 125 | 16 | 1piece | JPY: 37,040 | USD: 230.46 |
|
|
 |
61-1311-45 | T Slot Endmill (HSS, Φ26 Blade panjang 15 x Neck diameter: 11,0) TSE26X15 | TSE26X15 | 125 | 16 | 1piece | JPY: 37,040 | USD: 230.46 |
|
|
 |
61-1311-46 | T Slot Endmill (HSS, Φ28 Blade length 5 × Neck diameter: 11,0) TSE28X5 | TSE28X5 | 125 | 16 | 1piece | JPY: 35,070 | USD: 218.21 |
|
|
 |
61-1311-47 | T Slot Endmill (HSS, Φ28 Blade panjang 6 x Neck diameter: 11,0) TSE28X6 | TSE28X6 | 125 | 16 | 1piece | JPY: 35,070 | USD: 218.21 |
|
|
 |
61-1311-48 | T Slot Endmill (HSS, Φ28 Blade length 7 × Neck diameter: 11,0) TSE28X7 | TSE28X7 | 125 | 16 | 1piece | JPY: 35,070 | USD: 218.21 |
|
|
 |
61-1311-49 | T Slot Endmill (HSS, Φ28 Blade panjang 8 x Neck diameter: 11,0) TSE28X8 | TSE28X8 | 125 | 16 | 1piece | JPY: 35,070 | USD: 218.21 |
|
|
 |
61-1311-50 | T Slot Endmill (HSS, Φ28 Blade panjang 10 x Neck diameter: 11,0) TSE28X10 | TSE28X10 | 125 | 16 | 1piece | JPY: 35,070 | USD: 218.21 |
|
|
 |
61-1311-51 | T Slot Endmill (HSS, Φ28 Blade panjang 12 x Neck diameter: 11,0) TSE28X12 | TSE28X12 | 125 | 16 | 1piece | JPY: 37,040 | USD: 230.46 |
|
|
 |
61-1311-52 | T Slot Endmill (HSS, Φ28 Blade panjang 15 x Neck diameter: 11,0) TSE28X15 | TSE28X15 | 125 | 16 | 1piece | JPY: 37,040 | USD: 230.46 |
|
|
 |
61-1311-53 | T Slot Endmill (HSS, Φ30 Blade length 5 × Neck diameter: 13,0) TSE30X5 | TSE30X5 | 125 | 20 | 1piece | JPY: 40,970 | USD: 254.92 |
|
|
 |
61-1311-54 | T Slot Endmill (HSS, Φ30 Blade panjang 6 x Neck diameter: 13,0) TSE30X6 | TSE30X6 | 125 | 20 | 1piece | JPY: 40,970 | USD: 254.92 |
|
|
 |
61-1311-55 | T Slot Endmill (HSS, Φ30 Blade length 7 × Neck diameter: 13,0) TSE30X7 | TSE30X7 | 125 | 20 | 1piece | JPY: 40,970 | USD: 254.92 |
|
|
 |
61-1311-56 | T Slot Endmill (HSS, Φ30 Blade panjang 8 x Neck diameter: 13,0) TSE30X8 | TSE30X8 | 125 | 20 | 1piece | JPY: 40,970 | USD: 254.92 |
|
|
 |
61-1311-57 | T Slot Endmill (HSS, Φ30 Blade panjang 10 x Neck diameter: 13,0) TSE30X10 | TSE30X10 | 125 | 20 | 1piece | JPY: 40,970 | USD: 254.92 |
|
|
 |
61-1311-58 | T Slot Endmill (HSS, Φ30 Blade panjang 12 x Neck diameter: 13,0) TSE30X12 | TSE30X12 | 125 | 20 | 1piece | JPY: 42,850 | USD: 266.61 |
|
|
 |
61-1311-59 | T Slot Endmill (HSS, Φ30 Blade panjang 15 x Neck diameter: 13,0) TSE30X15 | TSE30X15 | 125 | 20 | 1piece | JPY: 42,850 | USD: 266.61 |
|