WIZnet Inc

WIZnet Inc WIZ830MJ Networking Module, 10/100 Base-TX　WIZ830MJ

WIZ830MJ Network Module (W5300). Plug-in Network Module having W5300 with Transformer and RJ45 Usable without Hardware design for W5300 Fast evaluation availabe for W5300 and MCU in the target board Supports 8 Independent connections simultaneously Supports MCU BUS Interface Supports 16/8 bit data bus width Support Memory to Memory DMA

WIZnet Inc

Module W3150+ (PPPoE) Auto-Crossover Skt　NM7010B+

Module W3150+ (PPPoE) Auto-Crossover Skt. WIZnet's NM7010B chip network module features: Plug-in module Usable without H/W design for W3150A+, PHY Chip, Transformer and RJ-45 Supports MCU BUS and SPI Interface Supports MDIX (auto detection of crossover)

WIZnet Inc

Module Network (W5100 + RJ45) 2.54mm pin　WIZ811MJ

WIZ811MJ / WIZ812MJ Network Module (W5100). Plug-in Network Module having W5100 Useful for Designing Network Interface Part Support Easy ; Quick Hardware Design Usable without H/W design for W5100, transformer and RJ-45 Fast evaluation available for W5100 and MCU in the target board Supports MCU BUS ans SPI Interface Supports auto MDI/MDIX (auto detection of crossover) Supports network status indicator LEDs FDX, TX, RX, LINK, Collision

WIZnet Inc

WIZnet Inc WIZ811MJ Networking Module, 10/100 Base-TX　WIZ811MJ

WIZ811MJ / WIZ812MJ Network Module (W5100). Plug-in Network Module having W5100 Useful for Designing Network Interface Part Support Easy ; Quick Hardware Design Usable without H/W design for W5100, transformer and RJ-45 Fast evaluation available for W5100 and MCU in the target board Supports MCU BUS ans SPI Interface Supports auto MDI/MDIX (auto detection of crossover) Supports network status indicator LEDs FDX, TX, RX, LINK, Collision

WIZnet Inc

Module-Network (W5300 + RJ45) 2.54mm Pin　WIZ830MJ

WIZ830MJ Network Module (W5300). Plug-in Network Module having W5300 with Transformer and RJ45 Usable without Hardware design for W5300 Fast evaluation availabe for W5300 and MCU in the target board Supports 8 Independent connections simultaneously Supports MCU BUS Interface Supports 16/8 bit data bus width Support Memory to Memory DMA

Phoenix Contact

Phoenix Contact 2902854 Fiber Optic Converter　2902854

Optical fiber signal converter
Optical fiber converter with built-in optical fiber diagnostic function alarm contact

Phoenix Contact

FL MC EF 1300 SM SC　2902856

Optical fiber signal converter
Optical fiber converter with built-in optical fiber diagnostic function alarm contact

Phoenix Contact

Phoenix Contact 2902853 Signal Converter　2902853

Optical fiber signal converter
Optical fiber converter with built-in optical fiber diagnostic function alarm contact

4D Systems

4D Systems 3.3 → 5V UART Audio Module, 21 x 20.5 x 11.3mm　SOMO-II

SOMO-II Audio-Sound Module. The SOund MOdule 2 (SOMO-II), from 4D Systems, is a compact audio-sound module designed for all embedded audio-sound applications. The SOMO-II is designed to play MP3 audio files from a micro-SD card or USB 2.0 flash drive with extra components. An on-board 16-bit MCU is specifically designed for hardware audio decoding. The files can be stored in the root folder of the micro-SD or USB flash drive. It can take up to 99 folders with 255 songs in each. The audio files can be loaded onto the micro-SD card or USB flash drive using a PC or laptop without additional software. The SOMO-II offers two modes, SERIAL-MODE and KEY-MODE: SERIAL-MODE has a 2-wire serial UART interface to a microcontroller via the TX and RX pins. A range of audio operations such as play, pause, stop, next, previous and volume control are available to the host micro through serial commands. KEY-MODE is a stand-alone operation where the host micro is not needed. It is then possible to control the module with just a few push buttons.. Features of the SOMO-II audio-sound module: Compact 16-pin package Dimensions: 21 x 20.5 x 11.3 mm 24-bit DAC output SERIAL-MODE or KEY-MODE Mono amplified speaker output Stereo DAC audio output for external amp/headphones On-board micro-SD adaptor Supports up to 32GB micro-SD or USB 2.0 flash drive 3.3V to 5V DC voltage range (single supply)

CONTEC Co., Ltd.

100KSPS 12 bit resolution analog input/output board for PCI Express　AIO-121601E3-PE

This product is a non-insulated PCI Express bus-compatible board that extends analog signal input/output functions to personal computers.
A buffer memory with a large capacity of 16M data is installed in the analog input section, allowing background sampling under various trigger conditions.

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 220º Interchangeable Lens　RP-L220

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 220º Interchangeable Lens　RP-L220N

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 195º Interchangeable Lens　RP-L195

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 195º Interchangeable Lens　RP-L195N

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 165º Interchangeable Lens　RP-L165

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 165º Interchangeable Lens　RP-L165N

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 98º Interchangeable Lens　RP-L98

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 98º Interchangeable Lens　RP-L98N

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark Video Capture Module, Mounting Bracket　RP-MK1

DesignSpark

［Discontinued］DesignSpark Video Capture Module, Mounting Bracket　RP-MK1N

Halo Electronics

［Discontinued］Halo Electronics TG110-E050N5RL Networking Module, 10/100 Ethernet　TG110-E050N5RL

PTG-20101003 ( ; 737-0003 737-0003 ) - 10BASE-T, 10/100BASE-TX PTG-201G0004 ( ; 737-0006 737-0006 ) - Gigabit. RJ-45 Ethernet sockets ; accessories. Brought to you by Halo Electronics, a series of PCB mounting sockets and protection accessories for Ethernet communications up to 1000 GB. The shielded sockets excel within networking applications. All models are highly reliable and excellent quality. Features ; Benefits. All sockets contain transformer/choke components. Black Polyester UL94V-0 housing material. Compatible with lead-free wave soldering for through-hole components

WIZnet Inc

［Discontinued］Module W5100 (PPPoE) Auto-Crossover Skt　WIZ810MJ

WIZ810MJ chip network module. WIZnet's WIZ810MJ chip network module features:. Plug-in module Fast evaluation of W5100 and MCU in the target board Supports MCU BUS and SPI Interface Supports Auto MDI/MDIX (auto detection of crossover)

Rabbit Semiconductor

［Discontinued］Rabbit Semiconductor Rabbit 3000 CP 44.2MHz Core Module, 3.15 → 3.45V　20-101-0520

RCM3200 RabbitCore® Single-Board Controller. The RCM3200 RabbitCore processor module offers the features and performance for embedded control systems, providing secure data communication with integrated Ethernet connectivity. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. 44.2MHz Rabbit 3000 MPU with low-power 'Sleepy' modes. Spectrum spreader for reduced EMI (radiated emissions). On-board 512KB program Flash memory. On-board 512KB program execution SRAM. On-board 256KB data SRAM (battery-backable). Watchdog supervisor. 52 x GPIO ports. Up to 6 x serial ports. 4 x PWM outputs. 2 x Quadrature Encoder inputs. 10/100 Ethernet connectivity via RJ45 socket. Battery-backable Real-Time Clock (RTC). Connectors: 2 x 34-pin signal headers, 10-pin programming header. Power supply: +3.3Vdc @ 255mA. Operating temperature range: 0 to +70°C. Dimensions: 69 x 47 x 22mm

Rabbit Semiconductor

［Discontinued］Rabbit Semiconductor Rabbit 3000 CP 22MHz Core Module, 5V　20-101-0672

RCM3600 RabbitCore® Industrial Single-Board Controller. The RCM3600 RabbitCore processor module offers features and performance for general purpose embedded control systems at low cost. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. 22MHz Rabbit 3000 MPU. Spectrum spreader for reduced EMI (radiated emissions). On-board 512KB program Flash memory. On-board 512KB data SRAM (battery-backable). Watchdog supervisor. 33 x GPIO ports. Up to 4 x serial ports. 4 x PWM outputs. 2 x Quadrature Encoder inputs. Battery-backable Real-Time Clock (RTC). Connectors: 40-pin signal header, 10-pin programming header. Power supply: +5Vdc @ 60mA. Operating temperature range: -40 to +85°C. Dimensions: 54 x 31 x 16mm

Digi International

［Discontinued］Digi International DC-ME-01T-S Networking Module, 10/100 Base-T　DC-ME-01T-S

Development board, software CD, and documentation (Kits only). Connect® ME JumpStart Kits ; Modules. Built on leading Digi 32-bit ARM® technology, the Digi Connect ME® is a connector-style embedded module that enables manufacturers to keep pace with ever-evolving networking technology by easily adding secure web-enabled network connectivity to their products. Highly-integrated 32-bit NS7520 ARM7TDMI co-processor module 10/100Base-T Ethernet interface with RJ-45 socket High-speed serial interface with up to 230kbps throughput Five shared GPIO port options

Digi International

［Discontinued］Digi International DC-ME-Y402-C Networking Module, 10/100 Base-T　DC-ME-Y402-C

Connect ME 9210 Module. Wired 10/100Base-T network interface Secure hardware encryption engine Unique peripheral interface flexibility Dynamic power management

WIZnet Inc

［Discontinued］Module Serial-to-Ethernet Gateway,RJ45　WIZ105SR

WIZ105SR Serial-to-Ethernet Gateway Module. High speed Serial-to-Ethernet gateway module with an RJ-45 jack High stability and reliability Ethernet connection solution 10/100Mbps Ethernet interface supported with full hardwired TCP/IP stack chip W5100 Up to 230Kbps serial communication interface Serial configuration commands support: Simple command frame format, Comprehensive ; readable command set for network and serial settings, On-site configuration without PC Powerful remote configuration tool Stock no. 698-9132: Bridge Cable 12-pin to connect the RS-232 serial interface of WIZ105SR with the Test Board. Stock no. 698-9136: Evaluation Kit contains a WIZ105SR Module, Test Board, Bridge Cable 12-pin, Serial cable, and LAN cable and a Power adaptor DC 5V

WIZnet Inc

［Discontinued］Module Network (W5100 + RJ45) 2.54mm pin　WIZ812MJ

WIZ811MJ / WIZ812MJ Network Module (W5100). Plug-in Network Module having W5100 Useful for Designing Network Interface Part Support Easy ; Quick Hardware Design Usable without H/W design for W5100, transformer and RJ-45 Fast evaluation available for W5100 and MCU in the target board Supports MCU BUS ans SPI Interface Supports auto MDI/MDIX (auto detection of crossover) Supports network status indicator LEDs FDX, TX, RX, LINK, Collision

WIZnet Inc

［Discontinued］WIZnet Inc WIZ812MJ Networking Module, 10/100 Base-TX　WIZ812MJ

WIZ811MJ / WIZ812MJ Network Module (W5100). Plug-in Network Module having W5100 Useful for Designing Network Interface Part Support Easy ; Quick Hardware Design Usable without H/W design for W5100, transformer and RJ-45 Fast evaluation available for W5100 and MCU in the target board Supports MCU BUS ans SPI Interface Supports auto MDI/MDIX (auto detection of crossover) Supports network status indicator LEDs FDX, TX, RX, LINK, Collision

Halo Electronics

［Discontinued］Telecom Transformer 10/100 Ultra SMT　TG110-E055N5RL

PTG-20101003 ( ; 737-0003 737-0003 ) - 10BASE-T, 10/100BASE-TX PTG-201G0004 ( ; 737-0006 737-0006 ) - Gigabit. RJ-45 Ethernet sockets ; accessories. Brought to you by Halo Electronics, a series of PCB mounting sockets and protection accessories for Ethernet communications up to 1000 GB. The shielded sockets excel within networking applications. All models are highly reliable and excellent quality. Features ; Benefits. All sockets contain transformer/choke components. Black Polyester UL94V-0 housing material. Compatible with lead-free wave soldering for through-hole components

Halo Electronics

［Discontinued］Telecom Transformer 10/100 with POE SMT　TG110-RP55N5RL

PTG-20101003 ( ; 737-0003 737-0003 ) - 10BASE-T, 10/100BASE-TX PTG-201G0004 ( ; 737-0006 737-0006 ) - Gigabit. RJ-45 Ethernet sockets ; accessories. Brought to you by Halo Electronics, a series of PCB mounting sockets and protection accessories for Ethernet communications up to 1000 GB. The shielded sockets excel within networking applications. All models are highly reliable and excellent quality. Features ; Benefits. All sockets contain transformer/choke components. Black Polyester UL94V-0 housing material. Compatible with lead-free wave soldering for through-hole components

VIA Technologies

［Discontinued］APC 8750 Android Personal Computer board　APC 8750

I/O socket cover panel. APC 8750 Android Neo-ITX Personal Computer. The APC single-board computer runs a custom Android operating system, built for keyboard and mouse input. A basic selection of applications is preinstalled. Also included is a full set of consumer I/O ports, enabling APC to connect to your PC monitor or TV. Getting Started guide, Engineering Resources including OS updates available online at: http://apc.io/. 800MHz ARM1176JZF-core processor 512MB DDR3 SDRAM memory 2GB NAND Flash memory Built-in 2D/3D graphics, resolution up to 720p On-board real-time clock/calendar Android 2.3 OS pre-installed HDMI video socket VGA video socket 10/100 Ethernet RJ45 socket 4 x USB 2.0 sockets: USB0 host/device selectable by jumper 3.5mm audio out ; microphone sockets microSD card slot UART serial port header, with RTS/CTS signals and +3.3Vout SPI serial port header 2.5mm +9Vdc power socket (Centre pin positive) Alternative +12Vdc 4-way ATX-type PSU socket Power consumption: 4W idle, 13.5W full load Power pushbutton and Power-On LED Remote Power pushbutton and Power-On LED header Size: 170 x 85mm Neo-ITX format board, compatible with Mini-ITX and Micro-ATX cases. RS Product Codes. ; 768-9782 768-9782 APC 8750 Android Personal Computer. ; 772-4801 772-4801 RS Pro Universal Mains Power Supply

WEPTECH

［Discontinued］WEPTECH WEP-6LoWPAN-IoT-GW Network Interface Card NIC, 10BASE-T Ethernet (Microchip ENC28J60), 802.15.4 (2.4GHZ),　WEP-6LoWPAN-IoT-GW

This variant of the 6LoWPAN IoT Gateway is the development version and is supplied without an enclosure. 6LoWPAN IoT Gateway. The 6LoWPAN IoT Gateway from WEPTECH is a wireless interface device that functions as a Border Router for a local 6LoWPAN network, connecting a wireless IPv6 network to servers on the Internet. A NAT64 translator is used to convert between the 6LoWPAN IPv6 sensor network protocol and IPv4 used on the Internet. The on-board transceivers provide the flexibility of wireless operation over 2.4GHz or Sub-1GHz ISM bands. CC2538 32MHz ARM Cortex-M3 core, 2.4GHz IEEE 802.15.4 wireless SoC with 512KB Flash memory, 32KB RAM CC1200 868/915MHz IEEE 802.15.4g wireless transceiver 'Plug and Play' NAT64 or native IPv6 (Bridge Mode) Up to 32 x 6LoWPAN Child Nodes Security: AES and SHA Encryption Engine 10Base-T Ethernet connection via Microchip ENC28J60 Ethernet Controller USB 2.0 Virtual COM Port Internal antennas Power supply: +5Vdc via microUSB connector Operating System: Open-Source Contiki (http://www.contiki-os.org/) Firmware update via USB Application: Communication for the Internet of Things (IoT)

Lantronix

［Discontinued］Lantronix XPDNC2000-01 Networking Module　XPDNC2000-01

Lantronix

［Discontinued］Lantronix XPD1001000-01 Networking Module　XPD1001000-01

Lantronix

［Discontinued］Lantronix XPDNC2000-01 Networking Module　XPDNC2000-01

WIZnet Inc

［Discontinued］Ser-to-Eth Gateway - Module w/PCB pins　WIZ100SR

Ser-to-Eth Gateway - Module w/PCB pins. WIZnet's WIZ100SR Serial to Ethernet Gateway module features: Plug ; Play Serial to Ethernet Gateway module High stability ; reliability by using W5100 WIZnet Chip, a fully-hardwired TCP/IP stack 10/100Mbps Ethernet Interface, Max. 230Kbps Serial Interface Compact size : 50mm X 30mm

Rabbit Semiconductor

［Discontinued］Rabbit Semiconductor Rabbit 4000 CP 58.98MHz Core Module, 3 → 3.6V dc　20-101-1138

RCM4300 RabbitCore® Industrial Single-Board Controller. The RCM4300 RabbitCore processor module offers the features and performance to support data encryption, secure data transmission and web server applications. The RCM4300 module provides the capability to use up to 1GB mass storage with the industry-standard miniSD™ memory cards which can be 'hot-swapped' without powering down the module. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. The RCM4300 supports a FAT file system for mass storage with the on-board SD card. Also supported are RabbitWeb for creating dynamic HTML interfaces, and Rabbit ‘s Transport Layer Security (TLS/SSL) implementation for secure web transactions. 58.98MHz Rabbit 4000 MPU. Spectrum spreader for reduced EMI (radiated emissions). On-board 2MB serial Flash program memory. On-board 1MB program execution SRAM. On-board 512KB data SRAM (battery-backable). Watchdog supervisor. 28 x GPIO ports. Up to 5 x serial ports. 8-channel 12-bit ADC inputs (or 4-channel 11-bit Differential inputs). 4 x PWM outputs. 2 x Quadrature Encoder inputs. 10/100 Ethernet connectivity via RJ45 socket. MiniSD card slot (up to 1GB). Battery-backable Real-Time Clock (RTC). Connectors: 50-pin IDC signal header, 10-pin IDC programming header. Power supply: +3.3Vdc @ 350mA. Operating temperature range: -20 to +85°C (without SD card). Dimensions: 72 x 47 x 21mm

Rabbit Semiconductor

［Discontinued］Rabbit Semiconductor Rabbit 4000 CP 59MHz Core Module, 3 → 3.6V dc　20-101-1112

RCM4010 RabbitCore® module. The RCM4000 microprocessor core module is a powerful embedded Ethernet control device that has the intelligence and internet connectivity that allows your devices to be remotely monitored and controlled from anywhere in the world. Rabbit® 4000 microprocessor with Integrated Ethernet Clock speed at 58.98MHz with 16-bit memory 32MB NAND flash for data 8 channel 12-bit A/D converter 25 digital I/O lines

Rabbit Semiconductor

［Discontinued］Rabbit Semiconductor Rabbit 4000 CP 59MHz Core Module, 3 → 3.6V　20-101-1131

RCM4200 RabbitCore® Industrial Single-Board Controller. The RCM 4200 RabbitCore processor module offers the features and performance to support data encryption, secure data transmission and web server applications. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. The module supports RabbitWeb for creating dynamic HTML interfaces and Rabbit ‘s Transport Layer Security (TLS/SSL) implementation for secure web transactions. 58.98MHz Rabbit 4000 MPU. Spectrum spreader for reduced EMI (radiated emissions). On-board 512KB program Flash memory. On-board 8MB serial mass-storage Flash memory. On-board 512KB program execution SRAM. On-board 512KB data SRAM (battery-backable). Watchdog supervisor. 25 x GPIO ports. Up to 4 x serial ports. 8-channel 12-bit ADC inputs (or 4-channel 11-bit Differential inputs). 3 x PWM outputs. 1 x Quadrature Encoder input. 10/100 Ethernet connectivity via RJ45 socket. Battery-backable Real-Time Clock (RTC). Connectors: 50-pin IDC signal header, 10-pin IDC programming header. Power supply: +3.3Vdc @ 240mA. Operating temperature range: -40 to +85°C. Dimensions: 61 x 47 x 21mm