DesignSpark

［Discontinued］DesignSpark, White Raspberry Pi Case　ASM-1900036-11

The Raspberry Pi development board and camera are not included. DesignSpark Cases for Raspberry Pi 2 Model B, Raspberry Pi 3 Model B and Raspberry Pi Model B+. From DesignSpark a protective case designed to enclose your Raspberry Pi 2 Model B, Raspberry Pi 3 Model B or Raspberry Pi Model B+ development board. In addition, this RPi case also features two mounting points for your Pi HD and Pi NoIR camera boards. The cases are made from robust ABS and consist of three parts which easily snap together. The case has a modular design which consisting of a base, centre band and cover which simply snap together. Raspberry Pi Case Components. Base. The base of the Raspberry Pi case features four non-slip rubber feet for stability and two screw mounting keyholes for wall mounting. The base also contains ventilation holes for dissipating the heat of the internal RPi board and components. Centre Band. The middle part of the Raspberry Pi enclosure or centre band is designed to contain and provide protection to the Raspberry Pi board and other sensitive components. There is a mounting point for a Raspberry Pi camera, apertures for heat-sinks and LED guides plus space for expansion boards. A vertical mounting slot accommodates the Raspberry Pi camera PCB. This feature prevents any obtrusions from the case allowing it to be mounted on a flat surface. Cut-outs along the sides of the Raspberry Pi case are provided for USB ports and connectors. Cover. The cover of the Raspberry Pi case, when fitted, leaves a 2 mm gap around the top edge of the case to allow for ribbon cable access to GPIO and camera and display headers. A novel cut-out in the cover in the form of a Raspberry Pi logo with a camera mounting point behind it allows the RPi camera to look out through one of the holes in the logo!. Key Features and Benefits. Suitable for use with Raspberry Pi 2, Raspberry Pi 3, and Raspberry Pi B+ Easy to assemble snap together modular format Two mounting points for Raspberry Pi cameras Cut-outs on enclosure for USB ports and connectors Space for expansion boards Ventilated slots in base for heat dissipation Slots under cover for GPIO and ribbon cable access Non-slip rubber feet for stability Screw mounting keyholes for wall mounting Available in different colours, black clear, white and red

DesignSpark

［Discontinued］DesignSpark Quattro, Clear Raspberry Pi Case　ASM-1900039-01

The Raspberry Pi development board and camera are not included. DesignSpark Quattro Case for Raspberry Pi 2 Model B, Raspberry Pi 3 Model B and Raspberry Pi Model B+. From DesignSpark the Quattro Raspberry Pi case designed to enclose your Raspberry Pi 2 Model B, Raspberry Pi 3 Model B or Raspberry Pi Model B+ development board and an internal 2.5 inch hard drive. The Quattro case has a spacious design with room inside for installing other components including a front facing Raspberry Pi camera and HAT (Hardware Attached on Top) PCBs. The Quattro RPi enclosure is made from robust ABS and has a modular design which consists of a base, centre band and cover which simply snap together. Quattro Raspberry Pi Case Components. Base. The base of the Quattro Raspberry Pi case is designed with a mounting template to make layout of the internal components including the 2.5 Hard Drive easier. Recessed pockets in the enclosure base are provided for components such as on-board heatsinks and connectors. The base has ventilation holes for dissipating the heat of the RPi board and features non-slip rubber feet underneath for stability. Centre Band. The middle part or centre band of the Quattro Raspberry Pi case is designed to cover and protect the RPi board and all the sensitive components and simply clips over the PCB. The centre band provides enough internal space for the addition of HAT PCBs as well as a hidden front facing Raspberry Pi camera. The front of the case features a removable cover plate which allows access to the SD card. The cover plate also serves as the Raspberry Pi camera face plate and contains an aperture in the centre of the Raspberry Pi logo allowing the camera be used as a security camera. The front of the Raspberry Pi case features two sets of LED apertures or light tunnels for both the Raspberry Pi 3 and the Raspberry Pi Model B+ and Raspberry Pi 2. Openings and recesses for all the USB ports and connectors are incorporated into the sides of the case along with a Kensington security slot. Cover. The cover of the Raspberry Pi enclosure, when fitted provides protection to the internal components. Four offset spacers are provided which, when added to the top cover, provide extra height when using tall HAT boards or for passing a ribbon cable out from the GPIO pins. The raised cover height also provides increased 360° ventilation. For additional security the top cover can be screwed down into position using normal or security screws. Mounting Options. The Quattro Raspberry Pi case features non slip rubber feet on the base for resting on a flat surface and screw mounting keyholes for wall mounting. A VESA (Video Electronics Standards Association) standard bracket is also provided for mounting the Raspberry Pi case on the back of a monitor. Key Features and Benefits. Suitable for use with Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi B+ Easy to assemble snap together modular design Stylish and robust design Space for internal 2.5 HDD Internal space for HAT PCBs, and hidden Pi camera Recessed pockets and openings for connectors and ports Removable face plate for SD card access Aperture for Raspberry Pi camera lens LED apertures for Pi 3, Pi B+ and Pi 2 Ventilated holes for heat dissipation Non slip rubber feet for stability Spacers for added top cover height and ribbon cable access Screw mounting keyholes for wall mounting VESA bracket for mounting on back of a monitor

DesignSpark

［Discontinued］DesignSpark Quattro, Clear Raspberry Pi Case　ASM-1900039-01_Bulk

The Raspberry Pi development board and camera are not included. DesignSpark Quattro Case for Raspberry Pi 2 Model B, Raspberry Pi 3 Model B and Raspberry Pi Model B+. From DesignSpark the Quattro Raspberry Pi case designed to enclose your Raspberry Pi 2 Model B, Raspberry Pi 3 Model B or Raspberry Pi Model B+ development board and an internal 2.5 inch hard drive. The Quattro case has a spacious design with room inside for installing other components including a front facing Raspberry Pi camera and HAT (Hardware Attached on Top) PCBs. The Quattro RPi enclosure is made from robust ABS and has a modular design which consists of a base, centre band and cover which simply snap together. Quattro Raspberry Pi Case Components. Base. The base of the Quattro Raspberry Pi case is designed with a mounting template to make layout of the internal components including the 2.5 Hard Drive easier. Recessed pockets in the enclosure base are provided for components such as on-board heatsinks and connectors. The base has ventilation holes for dissipating the heat of the RPi board and features non-slip rubber feet underneath for stability. Centre Band. The middle part or centre band of the Quattro Raspberry Pi case is designed to cover and protect the RPi board and all the sensitive components and simply clips over the PCB. The centre band provides enough internal space for the addition of HAT PCBs as well as a hidden front facing Raspberry Pi camera. The front of the case features a removable cover plate which allows access to the SD card. The cover plate also serves as the Raspberry Pi camera face plate and contains an aperture in the centre of the Raspberry Pi logo allowing the camera be used as a security camera. The front of the Raspberry Pi case features two sets of LED apertures or light tunnels for both the Raspberry Pi 3 and the Raspberry Pi Model B+ and Raspberry Pi 2. Openings and recesses for all the USB ports and connectors are incorporated into the sides of the case along with a Kensington security slot. Cover. The cover of the Raspberry Pi enclosure, when fitted provides protection to the internal components. Four offset spacers are provided which, when added to the top cover, provide extra height when using tall HAT boards or for passing a ribbon cable out from the GPIO pins. The raised cover height also provides increased 360° ventilation. For additional security the top cover can be screwed down into position using normal or security screws. Mounting Options. The Quattro Raspberry Pi case features non slip rubber feet on the base for resting on a flat surface and screw mounting keyholes for wall mounting. A VESA (Video Electronics Standards Association) standard bracket is also provided for mounting the Raspberry Pi case on the back of a monitor. Key Features and Benefits. Suitable for use with Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi B+ Easy to assemble snap together modular design Stylish and robust design Space for internal 2.5 HDD Internal space for HAT PCBs, and hidden Pi camera Recessed pockets and openings for connectors and ports Removable face plate for SD card access Aperture for Raspberry Pi camera lens LED apertures for Pi 3, Pi B+ and Pi 2 Ventilated holes for heat dissipation Non slip rubber feet for stability Spacers for added top cover height and ribbon cable access Screw mounting keyholes for wall mounting VESA bracket for mounting on back of a monitor

DesignSpark

［Discontinued］DesignSpark Quattro, White Raspberry Pi Case　ASM-1900039-11

The Raspberry Pi development board and camera are not included. DesignSpark Quattro Case for Raspberry Pi 2 Model B, Raspberry Pi 3 Model B and Raspberry Pi Model B+. From DesignSpark the Quattro Raspberry Pi case designed to enclose your Raspberry Pi 2 Model B, Raspberry Pi 3 Model B or Raspberry Pi Model B+ development board and an internal 2.5 inch hard drive. The Quattro case has a spacious design with room inside for installing other components including a front facing Raspberry Pi camera and HAT (Hardware Attached on Top) PCBs. The Quattro RPi enclosure is made from robust ABS and has a modular design which consists of a base, centre band and cover which simply snap together. Quattro Raspberry Pi Case Components. Base. The base of the Quattro Raspberry Pi case is designed with a mounting template to make layout of the internal components including the 2.5 Hard Drive easier. Recessed pockets in the enclosure base are provided for components such as on-board heatsinks and connectors. The base has ventilation holes for dissipating the heat of the RPi board and features non-slip rubber feet underneath for stability. Centre Band. The middle part or centre band of the Quattro Raspberry Pi case is designed to cover and protect the RPi board and all the sensitive components and simply clips over the PCB. The centre band provides enough internal space for the addition of HAT PCBs as well as a hidden front facing Raspberry Pi camera. The front of the case features a removable cover plate which allows access to the SD card. The cover plate also serves as the Raspberry Pi camera face plate and contains an aperture in the centre of the Raspberry Pi logo allowing the camera be used as a security camera. The front of the Raspberry Pi case features two sets of LED apertures or light tunnels for both the Raspberry Pi 3 and the Raspberry Pi Model B+ and Raspberry Pi 2. Openings and recesses for all the USB ports and connectors are incorporated into the sides of the case along with a Kensington security slot. Cover. The cover of the Raspberry Pi enclosure, when fitted provides protection to the internal components. Four offset spacers are provided which, when added to the top cover, provide extra height when using tall HAT boards or for passing a ribbon cable out from the GPIO pins. The raised cover height also provides increased 360° ventilation. For additional security the top cover can be screwed down into position using normal or security screws. Mounting Options. The Quattro Raspberry Pi case features non slip rubber feet on the base for resting on a flat surface and screw mounting keyholes for wall mounting. A VESA (Video Electronics Standards Association) standard bracket is also provided for mounting the Raspberry Pi case on the back of a monitor. Key Features and Benefits. Suitable for use with Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi B+ Easy to assemble snap together modular design Stylish and robust design Space for internal 2.5 HDD Internal space for HAT PCBs, and hidden Pi camera Recessed pockets and openings for connectors and ports Removable face plate for SD card access Aperture for Raspberry Pi camera lens LED apertures for Pi 3, Pi B+ and Pi 2 Ventilated holes for heat dissipation Non slip rubber feet for stability Spacers for added top cover height and ribbon cable access Screw mounting keyholes for wall mounting VESA bracket for mounting on back of a monitor

DesignSpark

［Discontinued］DesignSpark Quattro, White Raspberry Pi Case　ASM-1900039-11_Bulk

The Raspberry Pi development board and camera are not included. DesignSpark Quattro Case for Raspberry Pi 2 Model B, Raspberry Pi 3 Model B and Raspberry Pi Model B+. From DesignSpark the Quattro Raspberry Pi case designed to enclose your Raspberry Pi 2 Model B, Raspberry Pi 3 Model B or Raspberry Pi Model B+ development board and an internal 2.5 inch hard drive. The Quattro case has a spacious design with room inside for installing other components including a front facing Raspberry Pi camera and HAT (Hardware Attached on Top) PCBs. The Quattro RPi enclosure is made from robust ABS and has a modular design which consists of a base, centre band and cover which simply snap together. Quattro Raspberry Pi Case Components. Base. The base of the Quattro Raspberry Pi case is designed with a mounting template to make layout of the internal components including the 2.5 Hard Drive easier. Recessed pockets in the enclosure base are provided for components such as on-board heatsinks and connectors. The base has ventilation holes for dissipating the heat of the RPi board and features non-slip rubber feet underneath for stability. Centre Band. The middle part or centre band of the Quattro Raspberry Pi case is designed to cover and protect the RPi board and all the sensitive components and simply clips over the PCB. The centre band provides enough internal space for the addition of HAT PCBs as well as a hidden front facing Raspberry Pi camera. The front of the case features a removable cover plate which allows access to the SD card. The cover plate also serves as the Raspberry Pi camera face plate and contains an aperture in the centre of the Raspberry Pi logo allowing the camera be used as a security camera. The front of the Raspberry Pi case features two sets of LED apertures or light tunnels for both the Raspberry Pi 3 and the Raspberry Pi Model B+ and Raspberry Pi 2. Openings and recesses for all the USB ports and connectors are incorporated into the sides of the case along with a Kensington security slot. Cover. The cover of the Raspberry Pi enclosure, when fitted provides protection to the internal components. Four offset spacers are provided which, when added to the top cover, provide extra height when using tall HAT boards or for passing a ribbon cable out from the GPIO pins. The raised cover height also provides increased 360° ventilation. For additional security the top cover can be screwed down into position using normal or security screws. Mounting Options. The Quattro Raspberry Pi case features non slip rubber feet on the base for resting on a flat surface and screw mounting keyholes for wall mounting. A VESA (Video Electronics Standards Association) standard bracket is also provided for mounting the Raspberry Pi case on the back of a monitor. Key Features and Benefits. Suitable for use with Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi B+ Easy to assemble snap together modular design Stylish and robust design Space for internal 2.5 HDD Internal space for HAT PCBs, and hidden Pi camera Recessed pockets and openings for connectors and ports Removable face plate for SD card access Aperture for Raspberry Pi camera lens LED apertures for Pi 3, Pi B+ and Pi 2 Ventilated holes for heat dissipation Non slip rubber feet for stability Spacers for added top cover height and ribbon cable access Screw mounting keyholes for wall mounting VESA bracket for mounting on back of a monitor

DesignSpark

［Discontinued］DesignSpark Quattro, Black Raspberry Pi Case　ASM-1900039-21

The Raspberry Pi development board and camera are not included. DesignSpark Quattro Case for Raspberry Pi 2 Model B, Raspberry Pi 3 Model B and Raspberry Pi Model B+. From DesignSpark the Quattro Raspberry Pi case designed to enclose your Raspberry Pi 2 Model B, Raspberry Pi 3 Model B or Raspberry Pi Model B+ development board and an internal 2.5 inch hard drive. The Quattro case has a spacious design with room inside for installing other components including a front facing Raspberry Pi camera and HAT (Hardware Attached on Top) PCBs. The Quattro RPi enclosure is made from robust ABS and has a modular design which consists of a base, centre band and cover which simply snap together. Quattro Raspberry Pi Case Components. Base. The base of the Quattro Raspberry Pi case is designed with a mounting template to make layout of the internal components including the 2.5 Hard Drive easier. Recessed pockets in the enclosure base are provided for components such as on-board heatsinks and connectors. The base has ventilation holes for dissipating the heat of the RPi board and features non-slip rubber feet underneath for stability. Centre Band. The middle part or centre band of the Quattro Raspberry Pi case is designed to cover and protect the RPi board and all the sensitive components and simply clips over the PCB. The centre band provides enough internal space for the addition of HAT PCBs as well as a hidden front facing Raspberry Pi camera. The front of the case features a removable cover plate which allows access to the SD card. The cover plate also serves as the Raspberry Pi camera face plate and contains an aperture in the centre of the Raspberry Pi logo allowing the camera be used as a security camera. The front of the Raspberry Pi case features two sets of LED apertures or light tunnels for both the Raspberry Pi 3 and the Raspberry Pi Model B+ and Raspberry Pi 2. Openings and recesses for all the USB ports and connectors are incorporated into the sides of the case along with a Kensington security slot. Cover. The cover of the Raspberry Pi enclosure, when fitted provides protection to the internal components. Four offset spacers are provided which, when added to the top cover, provide extra height when using tall HAT boards or for passing a ribbon cable out from the GPIO pins. The raised cover height also provides increased 360° ventilation. For additional security the top cover can be screwed down into position using normal or security screws. Mounting Options. The Quattro Raspberry Pi case features non slip rubber feet on the base for resting on a flat surface and screw mounting keyholes for wall mounting. A VESA (Video Electronics Standards Association) standard bracket is also provided for mounting the Raspberry Pi case on the back of a monitor. Key Features and Benefits. Suitable for use with Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi B+ Easy to assemble snap together modular design Stylish and robust design Space for internal 2.5 HDD Internal space for HAT PCBs, and hidden Pi camera Recessed pockets and openings for connectors and ports Removable face plate for SD card access Aperture for Raspberry Pi camera lens LED apertures for Pi 3, Pi B+ and Pi 2 Ventilated holes for heat dissipation Non slip rubber feet for stability Spacers for added top cover height and ribbon cable access Screw mounting keyholes for wall mounting VESA bracket for mounting on back of a monitor

DesignSpark

［Discontinued］DesignSpark Quattro, Black Raspberry Pi Case　ASM-1900039-21_Bulk

The Raspberry Pi development board and camera are not included. DesignSpark Quattro Case for Raspberry Pi 2 Model B, Raspberry Pi 3 Model B and Raspberry Pi Model B+. From DesignSpark the Quattro Raspberry Pi case designed to enclose your Raspberry Pi 2 Model B, Raspberry Pi 3 Model B or Raspberry Pi Model B+ development board and an internal 2.5 inch hard drive. The Quattro case has a spacious design with room inside for installing other components including a front facing Raspberry Pi camera and HAT (Hardware Attached on Top) PCBs. The Quattro RPi enclosure is made from robust ABS and has a modular design which consists of a base, centre band and cover which simply snap together. Quattro Raspberry Pi Case Components. Base. The base of the Quattro Raspberry Pi case is designed with a mounting template to make layout of the internal components including the 2.5 Hard Drive easier. Recessed pockets in the enclosure base are provided for components such as on-board heatsinks and connectors. The base has ventilation holes for dissipating the heat of the RPi board and features non-slip rubber feet underneath for stability. Centre Band. The middle part or centre band of the Quattro Raspberry Pi case is designed to cover and protect the RPi board and all the sensitive components and simply clips over the PCB. The centre band provides enough internal space for the addition of HAT PCBs as well as a hidden front facing Raspberry Pi camera. The front of the case features a removable cover plate which allows access to the SD card. The cover plate also serves as the Raspberry Pi camera face plate and contains an aperture in the centre of the Raspberry Pi logo allowing the camera be used as a security camera. The front of the Raspberry Pi case features two sets of LED apertures or light tunnels for both the Raspberry Pi 3 and the Raspberry Pi Model B+ and Raspberry Pi 2. Openings and recesses for all the USB ports and connectors are incorporated into the sides of the case along with a Kensington security slot. Cover. The cover of the Raspberry Pi enclosure, when fitted provides protection to the internal components. Four offset spacers are provided which, when added to the top cover, provide extra height when using tall HAT boards or for passing a ribbon cable out from the GPIO pins. The raised cover height also provides increased 360° ventilation. For additional security the top cover can be screwed down into position using normal or security screws. Mounting Options. The Quattro Raspberry Pi case features non slip rubber feet on the base for resting on a flat surface and screw mounting keyholes for wall mounting. A VESA (Video Electronics Standards Association) standard bracket is also provided for mounting the Raspberry Pi case on the back of a monitor. Key Features and Benefits. Suitable for use with Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi B+ Easy to assemble snap together modular design Stylish and robust design Space for internal 2.5 HDD Internal space for HAT PCBs, and hidden Pi camera Recessed pockets and openings for connectors and ports Removable face plate for SD card access Aperture for Raspberry Pi camera lens LED apertures for Pi 3, Pi B+ and Pi 2 Ventilated holes for heat dissipation Non slip rubber feet for stability Spacers for added top cover height and ribbon cable access Screw mounting keyholes for wall mounting VESA bracket for mounting on back of a monitor

DesignSpark

［Discontinued］DesignSpark Quattro, Red Raspberry Pi Case　ASM-1900039-31

The Raspberry Pi development board and camera are not included. DesignSpark Quattro Case for Raspberry Pi 2 Model B, Raspberry Pi 3 Model B and Raspberry Pi Model B+. From DesignSpark the Quattro Raspberry Pi case designed to enclose your Raspberry Pi 2 Model B, Raspberry Pi 3 Model B or Raspberry Pi Model B+ development board and an internal 2.5 inch hard drive. The Quattro case has a spacious design with room inside for installing other components including a front facing Raspberry Pi camera and HAT (Hardware Attached on Top) PCBs. The Quattro RPi enclosure is made from robust ABS and has a modular design which consists of a base, centre band and cover which simply snap together. Quattro Raspberry Pi Case Components. Base. The base of the Quattro Raspberry Pi case is designed with a mounting template to make layout of the internal components including the 2.5 Hard Drive easier. Recessed pockets in the enclosure base are provided for components such as on-board heatsinks and connectors. The base has ventilation holes for dissipating the heat of the RPi board and features non-slip rubber feet underneath for stability. Centre Band. The middle part or centre band of the Quattro Raspberry Pi case is designed to cover and protect the RPi board and all the sensitive components and simply clips over the PCB. The centre band provides enough internal space for the addition of HAT PCBs as well as a hidden front facing Raspberry Pi camera. The front of the case features a removable cover plate which allows access to the SD card. The cover plate also serves as the Raspberry Pi camera face plate and contains an aperture in the centre of the Raspberry Pi logo allowing the camera be used as a security camera. The front of the Raspberry Pi case features two sets of LED apertures or light tunnels for both the Raspberry Pi 3 and the Raspberry Pi Model B+ and Raspberry Pi 2. Openings and recesses for all the USB ports and connectors are incorporated into the sides of the case along with a Kensington security slot. Cover. The cover of the Raspberry Pi enclosure, when fitted provides protection to the internal components. Four offset spacers are provided which, when added to the top cover, provide extra height when using tall HAT boards or for passing a ribbon cable out from the GPIO pins. The raised cover height also provides increased 360° ventilation. For additional security the top cover can be screwed down into position using normal or security screws. Mounting Options. The Quattro Raspberry Pi case features non slip rubber feet on the base for resting on a flat surface and screw mounting keyholes for wall mounting. A VESA (Video Electronics Standards Association) standard bracket is also provided for mounting the Raspberry Pi case on the back of a monitor. Key Features and Benefits. Suitable for use with Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi B+ Easy to assemble snap together modular design Stylish and robust design Space for internal 2.5 HDD Internal space for HAT PCBs, and hidden Pi camera Recessed pockets and openings for connectors and ports Removable face plate for SD card access Aperture for Raspberry Pi camera lens LED apertures for Pi 3, Pi B+ and Pi 2 Ventilated holes for heat dissipation Non slip rubber feet for stability Spacers for added top cover height and ribbon cable access Screw mounting keyholes for wall mounting VESA bracket for mounting on back of a monitor

DesignSpark

［Discontinued］DesignSpark Quattro, Red Raspberry Pi Case　ASM-1900039-31 _Bulk

The Raspberry Pi development board and camera are not included. DesignSpark Quattro Case for Raspberry Pi 2 Model B, Raspberry Pi 3 Model B and Raspberry Pi Model B+. From DesignSpark the Quattro Raspberry Pi case designed to enclose your Raspberry Pi 2 Model B, Raspberry Pi 3 Model B or Raspberry Pi Model B+ development board and an internal 2.5 inch hard drive. The Quattro case has a spacious design with room inside for installing other components including a front facing Raspberry Pi camera and HAT (Hardware Attached on Top) PCBs. The Quattro RPi enclosure is made from robust ABS and has a modular design which consists of a base, centre band and cover which simply snap together. Quattro Raspberry Pi Case Components. Base. The base of the Quattro Raspberry Pi case is designed with a mounting template to make layout of the internal components including the 2.5 Hard Drive easier. Recessed pockets in the enclosure base are provided for components such as on-board heatsinks and connectors. The base has ventilation holes for dissipating the heat of the RPi board and features non-slip rubber feet underneath for stability. Centre Band. The middle part or centre band of the Quattro Raspberry Pi case is designed to cover and protect the RPi board and all the sensitive components and simply clips over the PCB. The centre band provides enough internal space for the addition of HAT PCBs as well as a hidden front facing Raspberry Pi camera. The front of the case features a removable cover plate which allows access to the SD card. The cover plate also serves as the Raspberry Pi camera face plate and contains an aperture in the centre of the Raspberry Pi logo allowing the camera be used as a security camera. The front of the Raspberry Pi case features two sets of LED apertures or light tunnels for both the Raspberry Pi 3 and the Raspberry Pi Model B+ and Raspberry Pi 2. Openings and recesses for all the USB ports and connectors are incorporated into the sides of the case along with a Kensington security slot. Cover. The cover of the Raspberry Pi enclosure, when fitted provides protection to the internal components. Four offset spacers are provided which, when added to the top cover, provide extra height when using tall HAT boards or for passing a ribbon cable out from the GPIO pins. The raised cover height also provides increased 360° ventilation. For additional security the top cover can be screwed down into position using normal or security screws. Mounting Options. The Quattro Raspberry Pi case features non slip rubber feet on the base for resting on a flat surface and screw mounting keyholes for wall mounting. A VESA (Video Electronics Standards Association) standard bracket is also provided for mounting the Raspberry Pi case on the back of a monitor. Key Features and Benefits. Suitable for use with Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi B+ Easy to assemble snap together modular design Stylish and robust design Space for internal 2.5 HDD Internal space for HAT PCBs, and hidden Pi camera Recessed pockets and openings for connectors and ports Removable face plate for SD card access Aperture for Raspberry Pi camera lens LED apertures for Pi 3, Pi B+ and Pi 2 Ventilated holes for heat dissipation Non slip rubber feet for stability Spacers for added top cover height and ribbon cable access Screw mounting keyholes for wall mounting VESA bracket for mounting on back of a monitor

DesignSpark

［Discontinued］DesignSpark Quattro, Red, White Raspberry Pi Case　ASM-1900039-41

The Raspberry Pi development board and camera are not included. DesignSpark Quattro Case for Raspberry Pi 2 Model B, Raspberry Pi 3 Model B and Raspberry Pi Model B+. From DesignSpark the Quattro Raspberry Pi case designed to enclose your Raspberry Pi 2 Model B, Raspberry Pi 3 Model B or Raspberry Pi Model B+ development board and an internal 2.5 inch hard drive. The Quattro case has a spacious design with room inside for installing other components including a front facing Raspberry Pi camera and HAT (Hardware Attached on Top) PCBs. The Quattro RPi enclosure is made from robust ABS and has a modular design which consists of a base, centre band and cover which simply snap together. Quattro Raspberry Pi Case Components. Base. The base of the Quattro Raspberry Pi case is designed with a mounting template to make layout of the internal components including the 2.5 Hard Drive easier. Recessed pockets in the enclosure base are provided for components such as on-board heatsinks and connectors. The base has ventilation holes for dissipating the heat of the RPi board and features non-slip rubber feet underneath for stability. Centre Band. The middle part or centre band of the Quattro Raspberry Pi case is designed to cover and protect the RPi board and all the sensitive components and simply clips over the PCB. The centre band provides enough internal space for the addition of HAT PCBs as well as a hidden front facing Raspberry Pi camera. The front of the case features a removable cover plate which allows access to the SD card. The cover plate also serves as the Raspberry Pi camera face plate and contains an aperture in the centre of the Raspberry Pi logo allowing the camera be used as a security camera. The front of the Raspberry Pi case features two sets of LED apertures or light tunnels for both the Raspberry Pi 3 and the Raspberry Pi Model B+ and Raspberry Pi 2. Openings and recesses for all the USB ports and connectors are incorporated into the sides of the case along with a Kensington security slot. Cover. The cover of the Raspberry Pi enclosure, when fitted provides protection to the internal components. Four offset spacers are provided which, when added to the top cover, provide extra height when using tall HAT boards or for passing a ribbon cable out from the GPIO pins. The raised cover height also provides increased 360° ventilation. For additional security the top cover can be screwed down into position using normal or security screws. Mounting Options. The Quattro Raspberry Pi case features non slip rubber feet on the base for resting on a flat surface and screw mounting keyholes for wall mounting. A VESA (Video Electronics Standards Association) standard bracket is also provided for mounting the Raspberry Pi case on the back of a monitor. Key Features and Benefits. Suitable for use with Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi B+ Easy to assemble snap together modular design Stylish and robust design Space for internal 2.5 HDD Internal space for HAT PCBs, and hidden Pi camera Recessed pockets and openings for connectors and ports Removable face plate for SD card access Aperture for Raspberry Pi camera lens LED apertures for Pi 3, Pi B+ and Pi 2 Ventilated holes for heat dissipation Non slip rubber feet for stability Spacers for added top cover height and ribbon cable access Screw mounting keyholes for wall mounting VESA bracket for mounting on back of a monitor

DesignSpark

［Discontinued］DesignSpark Quattro, Red, White Raspberry Pi Case　ASM-1900039-41_Bulk

The Raspberry Pi development board and camera are not included. DesignSpark Quattro Case for Raspberry Pi 2 Model B, Raspberry Pi 3 Model B and Raspberry Pi Model B+. From DesignSpark the Quattro Raspberry Pi case designed to enclose your Raspberry Pi 2 Model B, Raspberry Pi 3 Model B or Raspberry Pi Model B+ development board and an internal 2.5 inch hard drive. The Quattro case has a spacious design with room inside for installing other components including a front facing Raspberry Pi camera and HAT (Hardware Attached on Top) PCBs. The Quattro RPi enclosure is made from robust ABS and has a modular design which consists of a base, centre band and cover which simply snap together. Quattro Raspberry Pi Case Components. Base. The base of the Quattro Raspberry Pi case is designed with a mounting template to make layout of the internal components including the 2.5 Hard Drive easier. Recessed pockets in the enclosure base are provided for components such as on-board heatsinks and connectors. The base has ventilation holes for dissipating the heat of the RPi board and features non-slip rubber feet underneath for stability. Centre Band. The middle part or centre band of the Quattro Raspberry Pi case is designed to cover and protect the RPi board and all the sensitive components and simply clips over the PCB. The centre band provides enough internal space for the addition of HAT PCBs as well as a hidden front facing Raspberry Pi camera. The front of the case features a removable cover plate which allows access to the SD card. The cover plate also serves as the Raspberry Pi camera face plate and contains an aperture in the centre of the Raspberry Pi logo allowing the camera be used as a security camera. The front of the Raspberry Pi case features two sets of LED apertures or light tunnels for both the Raspberry Pi 3 and the Raspberry Pi Model B+ and Raspberry Pi 2. Openings and recesses for all the USB ports and connectors are incorporated into the sides of the case along with a Kensington security slot. Cover. The cover of the Raspberry Pi enclosure, when fitted provides protection to the internal components. Four offset spacers are provided which, when added to the top cover, provide extra height when using tall HAT boards or for passing a ribbon cable out from the GPIO pins. The raised cover height also provides increased 360° ventilation. For additional security the top cover can be screwed down into position using normal or security screws. Mounting Options. The Quattro Raspberry Pi case features non slip rubber feet on the base for resting on a flat surface and screw mounting keyholes for wall mounting. A VESA (Video Electronics Standards Association) standard bracket is also provided for mounting the Raspberry Pi case on the back of a monitor. Key Features and Benefits. Suitable for use with Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi B+ Easy to assemble snap together modular design Stylish and robust design Space for internal 2.5 HDD Internal space for HAT PCBs, and hidden Pi camera Recessed pockets and openings for connectors and ports Removable face plate for SD card access Aperture for Raspberry Pi camera lens LED apertures for Pi 3, Pi B+ and Pi 2 Ventilated holes for heat dissipation Non slip rubber feet for stability Spacers for added top cover height and ribbon cable access Screw mounting keyholes for wall mounting VESA bracket for mounting on back of a monitor

DesignSpark

［Discontinued］DesignSpark Raspberry Pi Pmod HAT Adapter Board 410-366　410-366

Pmod HAT Adapter for Raspberry Pi. The Pmod HAT Adapter from DesignSpark is an add-on board which enables you to connect Digilent Pmod modules to your Raspberry Pi board. The adapter is a plug-and-play module, meaning once you have plugged it into your Raspberry Pi computer, you are ready to go. You can add up to 3 Pmod modules at once. The Pmod HAT Adapter has been designed with DesignSpark at RS Components. The DesignSpark community is full of examples of Python libraries and tutorials. Therefore there is plenty of resources to get you started with the Pmod HAT Adapter. You can find these at: https://www.rs-online.com/designspark. What's on-board?. GPIO : 40-pin connector to attach to Raspberry Pi Board Power : Jack connector Pmod Connection : Three 2x6 ports for Pmod modules Supports : SPI, UART, I2C, and GPIO connections. Which Raspberry Pi Boards are Compatible?. The DesignSpark Pmod HAT Adapter is compatible with Raspberry Pi boards with a 40-pin GPIO connector. This includes: Raspberry Pi Model A+ Raspberry Pi Model B+ Raspberry Pi 2 Model B Raspberry Pi 3 Model B Raspberry Pi 3 Model B+ Raspberry Pi Zero W Raspberry Pi Zero What are Pmod modules? Pmod's are a range of interface boards from Digilent. These expansion boards enable you to add functionality such as switches, GPS, keypads, displays and much more. There are loads of Pmods to choose from. What is a HAT adapter? HAT is the name given to Raspberry Pi add-on boards which sit directly on top of the board. This particular board is an adapter which connects to the Pi board's GPIO connector, like the Pi HAT modules, and provides you with access to the Digilent Pmod peripheral modules. How is it powered? The Pmod Adapter board can be powered either through the Raspberry Pi (through the 5V pins in the GPIO connector) or it can be powered by a 5V power jack (1.3A). How is it programmed? The DesignSpark Pmod adapter board enables you to control the Pmod modules using Python programming language. Please refer to the Reference Manual for links to the relevant software and downloads.

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 220º Interchangeable Lens　RP-L220

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 220º Interchangeable Lens　RP-L220N

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 195º Interchangeable Lens　RP-L195

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 195º Interchangeable Lens　RP-L195N

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 165º Interchangeable Lens　RP-L165

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 165º Interchangeable Lens　RP-L165N

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 98º Interchangeable Lens　RP-L98

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark M12 Mount Lens, 98º Interchangeable Lens　RP-L98N

Mounting bracket required. Please see ; 167-5919 167-5919 and ; 167-5921 167-5921. Entaniya Raspberry Pi Camera M12 Lenses. Each lens is available with either an Infra-Red (IR) filter for use with a daylight camera or a blue light filter for use with the Pi NoIR camera. There are 4 different angles of lens, each with either the blue or IR filter for the RP-VC1N Camera Module (RS ; 163-3895 163-3895 ):. Lens Options - view the street scene sample images above for an example output from each lens. 220º Fish Eye Lens RP-L220 - RS ; 163-3896 163-3896 - IR Filter RP-L220N - RS ; 163-3898 163-3898 - Blue Light Filter 195º Fish Eye Lens RP-L195 - RS ; 163-3899 163-3899 - IR Filter RP-L195N - RS ; 163-3900 163-3900 - Blue Light Filter 165º Ultra-Wide Angle Lens RP-L165 - RS ; 163-3901 163-3901 - IR Filter RP-L165N - RS ; 163-3902 163-3902 - Blue Light Filter 98º Wide Angle Lens RP-L98 - RS ; 163-3903 163-3903 - IR Filter RP-L98N - RS ; 163-3905 163-3905 - Blue Light Filter

DesignSpark

［Discontinued］DesignSpark Video Capture Module, Mounting Bracket　RP-MK1

DesignSpark

［Discontinued］DesignSpark Video Capture Module, Mounting Bracket　RP-MK1N

DesignSpark

［Discontinued］DesignSpark, Black Raspberry Pi Case　ASM-1900036-22

Raspberry Pi 3 Model B+ Cases — 3 part assembly. This range of protective cases for the Raspberry Pi 3 B+ are available in four colour options: black, clear, white and red. Features ; Benefits of our Pi Cases Made of ABS plastic Ventilation Rubber feet Cut-outs for all connections 3 parts that easily clip together Space for expansion boards Slots under the top case that allow external ribbon-cable access to GPIO and camera/display headers

DesignSpark

［Discontinued］DesignSpark, Clear Raspberry Pi Case　ASM-1900036-02

Raspberry Pi 3 Model B+ Cases — 3 part assembly. This range of protective cases for the Raspberry Pi 3 B+ are available in four colour options: black, clear, white and red. Features ; Benefits of our Pi Cases Made of ABS plastic Ventilation Rubber feet Cut-outs for all connections 3 parts that easily clip together Space for expansion boards Slots under the top case that allow external ribbon-cable access to GPIO and camera/display headers

DesignSpark

［Discontinued］DesignSpark, White Raspberry Pi Case　ASM-1900036-12

Raspberry Pi 3 Model B+ Cases — 3 part assembly. This range of protective cases for the Raspberry Pi 3 B+ are available in four colour options: black, clear, white and red. Features ; Benefits of our Pi Cases Made of ABS plastic Ventilation Rubber feet Cut-outs for all connections 3 parts that easily clip together Space for expansion boards Slots under the top case that allow external ribbon-cable access to GPIO and camera/display headers

DesignSpark

［Discontinued］DesignSpark, Red Raspberry Pi Case　ASM-1900036-52

Raspberry Pi 3 Model B+ Cases — 3 part assembly. This range of protective cases for the Raspberry Pi 3 B+ are available in four colour options: black, clear, white and red. Features ; Benefits of our Pi Cases Made of ABS plastic Ventilation Rubber feet Cut-outs for all connections 3 parts that easily clip together Space for expansion boards Slots under the top case that allow external ribbon-cable access to GPIO and camera/display headers

DesignSpark

［Discontinued］DesignSpark Mechanical Exchange Module　DSM-EXCHANGE

This product will be delivered as a license code via email. Please ensure that your email address is up-to-date on your RS account. The license will be available for emailing between the hours of 8am – 5pm. Orders placed after this time will be sent the next working day. This software follows a NCNR policy (no cancellation no return), please refer to the RS Conditions of Sale found at the bottom of the page. One licence key can only be used on 1 computer In order to activate your DesignSpark Mechanical add-on module you will be required to provide your name, email address and company name to the developer of this software. For more information please refer to their Privacy Policy. http://www.spaceclaim.com/en/UsingSpaceClaim/misc/termsofuse.aspx. This product will be delivered as a node-locked license code via email. DesignSpark Mechanical 3D CAD, Exchange Add-On. The Exchange module adds advanced import/export capabilities to the free 3D CAD DesignSpark Mechanical software suite. It lets you freely import, modify and export the industry standard STEP and IGES file formats, allowing you to fully exchange design data with 3D CAD tools such as SolidWorks, Catia, ProEngineer, AutoCAD. This module turns the free CAD DesignSpark Mechanical software into a low cost 3D CAD design solution, ideal for companies wanting to create fabulous product concepts, without having to invest in 3D CAD licenses ; training or relying on contractors for final design creation and manufacturing. The Exchange Add-on Module Provides:. Edit imported STEP, IGES file geometry Export geometry to STEP and IGES formats. DesignSpark 3D CAD Software:. DesignSpark Mechanical is a revolutionary free 3D CAD modelling software suite, unrivalled when it comes to engineering innovation and turning ideas into prototypes via 3D-Printing. Unlike traditional 3D CAD, DesignSpark Mechanical is easy to learn, intuitive, and is a free 3D CAD software suite, available to download at http://www.rs-online.com/designspark/electronics/eng/page/mechanical. DesignSpark features:. Create new geometry using sketch/Pull/Move 3D Modelling on Touch based Windows tablets or PCs Open and modify 3D PCBs from ECAD exported IDFs Download RS parts from Traceparts in DesignSpark Mechanical format Generate online quotes for purchasing RS parts Import geometry from popular 3D formats Export 3D designs as PDF document

DesignSpark

［Discontinued］DesignSpark Mechanical Module Drawing　DSM-DRAWING

This product will be delivered as a license code via email. Please ensure that your email address is up-to-date on your RS account. The license will be available for emailing between the hours of 8am – 5pm. Orders placed after this time will be sent the next working day.This software follows a NCNR policy (no cancellation no return), please refer to the RS Conditions of Sale found at the bottom of the page. One licence key can only be used on 1 computer In order to activate your DesignSpark Mechanical add-on module you will be required to provide your name, email address and company name to the developer of this software. For more information please refer to their Privacy Policy. http://www.spaceclaim.com/en/UsingSpaceClaim/misc/termsofuse.aspx. This product will be delivered as a node-locked license code via email DesignSpark Mechanical 3D CAD, Drawing Add-On. The Drawing module adds SpaceClaim's Associative Drawing environment to the free 3D CAD DesignSpark Mechanical software suite. It lets you change designs, as well as create and modify geometry from within drawing views. The drawing environment provides a familiar work space for those accustomed to working in 2D. This add-on supports annotations, including geometric dimensioning and tolerances, notes and leaders, to JIS, ISO, and ANSI® standards, and much more. Drawing Add-on Module Provides:. Create or view 2D drawings with support annotations and full GD ;T Thread tool - create standard ; custom threads Customize Drawing sheets Create and insert barcodes into drawings Create and modify perspective views on 2D drawings from 3D object. DesignSpark 3D CAD Software:. DesignSpark Mechanical is a revolutionary free 3D CAD modelling software suite, unrivalled when it comes to engineering innovation and turning ideas into prototypes via 3D-Printing. Unlike traditional 3D CAD, DesignSpark Mechanical is easy to learn, intuitive, and is a free 3D CAD software suite, available to download at http://www.rs-online.com/designspark/electronics/eng/page/mechanical. DesignSpark features:. Create new geometry using sketch/Pull/Move 3D Modelling on Touch based Windows tablets or PCs Open and modify 3D PCBs from ECAD exported IDFs Download RS parts from Traceparts in DesignSpark Mechanical format Generate online quotes for purchasing RS parts Import geometry from popular 3D formats Export 3D designs as PDF document