TRUSCO NAKAYAMA CORPORATION

Metal sheet soluble high-pressure Correspond type 18L and others

TRUSCO NAKAYAMA CORPORATION

Metal sheet emulsion emulsion type 18L and others

TRUSCO NAKAYAMA CORPORATION

Metal sheet chemical solution type 18L and others

Sumico Lubricant Co., Ltd.

Coolant (tapping paste) Sumi Power Tap paste Super 1kg　STP-10

Ideal for hard-to-cut machining of stainless steel, etc.
It is a paste cutting agent.

Nihon Kohsakuyu Co., Ltd.

Tapping paste C-101 (general Metal) 1kg and others

Nihon Kohsakuyu Co., Ltd.

Tapping paste C-100 (chlorine Type) 1kg and others

Nihon Kohsakuyu Co., Ltd.

Tapping paste C-101C (copper Alloy) 1kg　C-101C-1

Improves finish and work efficiency and extends tool life.
You can brush and brush.

R-GOT

Stencolorin Green 1L　R-4

In order to suppress heat generation during machining, an appropriate composition cutting edge can be obtained.
Difficult processing is easy, and it finishes beautifully.

FINE CHEMICAL JAPAN Co., Ltd.

Tapping compound A 420ml　FC-181

Reduces high temperature during cutting and prevents scratching.
For all metal tapping, screwing and drill reaming.

FINE CHEMICAL JAPAN Co., Ltd.

Fine Oil V Spray 420ml　FC-182-S

Light press, cutting and lubricating oil that disappears naturally.
No oil cleaning process is required after pressing or cutting.

TRUSCO NAKAYAMA CORPORATION

Α Tapping Spray difficult-to-machine material for 420ml and others

TRUSCO NAKAYAMA CORPORATION

Mori Tapping Spray high-performance cutting 420ml　MTS-420SP

This is a high-performance cutting spray that contains molybdenum disulfide, CI (chlorine) -based, P (phosphorus) -based extreme pressure additives, rust and corrosion inhibitors.
Reduces cutting resistance and prevents heat generation.

TRUSCO NAKAYAMA CORPORATION

Α Tapping Non Gas type difficult-to-machine material for Replacement Plastic bottle 350ml　ECO-TS-C

For difficult-to-cut machining of stainless steel, etc., and provides beautiful grinding.
Can be machined with light torque with no hard cutting and no mush.

TRUSCO NAKAYAMA CORPORATION

Mori Tapping Non Gas type high-performance cutting Exchange Plastic bottle 350ml　ECO-MTS-C

This is a high-performance cutting spray that contains molybdenum disulfide, CI (chlorine) -based, P (phosphorus) -based extreme pressure additives, rust and corrosion inhibitors.
Reduces cutting resistance and prevents heat generation.

TRUSCO NAKAYAMA CORPORATION

Mori Tapping Oil 1L and others

TRUSCO NAKAYAMA CORPORATION

N2 Tapping Spray Eco fresh minutes satisfiability 270ml　N2-TSE

This is an environmentally friendly biodegradable cutting agent that uses vegetable oils as its main ingredient and has low smoke and odor. (Does not contain chlorine, sulfur, or heavy metals) The injection gas uses nonflammable nitrogen gas, which is contained in about 75% of the atmosphere.
Tap die processing.

DAIZO CORPORATION

Add Moss A S-02 Tapping Spray 420ml　4006340

Because it is a grease type, it has less scattering and dripping than an oil type, better stopping on the cutting edge, and produces an excellent cutting effect by applying only a small amount. It is an economical product with little loss.
Prevents heat generation, improves finish accuracy, and greatly extends tool life. The cutting powder is discharged well.

Sumico Lubricant Co., Ltd.

Coolant (additive, Oil) smykow Ultra sheet 300ml　SUC-3

Oil-like water-insoluble cutting agent containing extreme pressure agent. (Additives) Heavy cutting of stainless steel and hard alloys.
Drill, tap, and reamer.

Repco Co., Ltd.

Vegetable Cutting Oil suspension but (baud 340ml and others

RIDGID

threading Oil Endura-Clear 1 Gal (3.78 L) and others

ISHIHASHI SEIKO

IS Oil　18L-N

To extend cutting efficiency and tool life.
Minute particles of molybdenum disulfide cut to 1 micron are added. Although molybdenum disulfide is a waxy soft mineral, it does not melt up to 1800°C.

ISHIHASHI SEIKO

SS Oil Jet Spray A (420 ML)　JSA

Cutting oil containing molybdenum dioxide.
The wear of cutting tools is low, and the life is extended, and the cutting surface is also finished gracefully.

ISHIHASHI SEIKO

SS Oil 18 Liter L Type　IS18L

The wear of the cutting tool is reduced, the life is extended, and the cutting surface is finished beautifully.
It's liquid.

ISHIHASHI SEIKO

IS Oil　POIL

Comes in a pack.
The wear of the cutting tool is reduced, the life is extended, and the cutting surface is finished beautifully.

R-GOT

Stencolorin Red Super gel 180g　R-5

For stainless steel.
It melts with heat, becomes liquid, and exhibits cutting force.

R-GOT

Stencolorin Green Super gel 180g　R-6

For general steel.
It melts with heat, becomes liquid, and exhibits cutting force.

SUZUKI YUSHI INDUSTRIAL CO., LTD.

Miracle Super Tapping 4 l and others

TRUSCO NAKAYAMA CORPORATION

Mori Tapping Spray high-performance cutting Nozzle for with 350ml　ECO-MTS-S

This is a high-performance cutting spray that contains molybdenum disulfide, CI (chlorine) -based, P (phosphorus) -based extreme pressure additives, rust and corrosion inhibitors.
Reduces cutting resistance and prevents heat generation.

TRUSCO NAKAYAMA CORPORATION

Non-gas Spray dedicated Nozzle　ECO-NOZ

Nozzle dedicated to non-gas spray.
As a replacement nozzle for non-gas spray.

TRUSCO NAKAYAMA CORPORATION

Α Tapping Spray difficult-to-machine material Nozzle for with 350ml　ECO-TS-S

For difficult-to-cut machining of stainless steel, etc., and provides beautiful grinding.
Can be machined with light torque with no hard cutting and no mush.

Cutting Oil Spray 420 mL　EA921SA-3

Can be used in a wide range of applications from general cutting to high-speed heavy cutting.
Excellent effect on materials such as carbon steel, alloy steel and stainless steel.

ASAHI ENGINEERING Co., Ltd.

Bio-Attack　BA-1000

The temperature and pH of the oil agent make it a comfortable breeding nest for germs, and if not managed, the oil agent will spoil and produce a foul odor.
After the active ingredients are dissolved, the workplace is improved to a hygienic and comfortable working environment.

TRUSCO NAKAYAMA CORPORATION

Metal Cut Forest(Water-soluble Cutting Fluid) and others

TRUSCO NAKAYAMA CORPORATION

Metal Cut Forest(Water-soluble Cutting Fluid) and others

ESCO Company Ltd.

Chain saw oil [water soluble] 1.0L　EA920AK-8

ESCO Company Ltd.

Chain saw oil 4.0L　EA920AK-10A

ESCO Company Ltd.

Hammer drill oil 100mL　EA920AK-12

ESCO Company Ltd.

Cutting oil 1.0L　EA920AK-27

ESCO Company Ltd.

Tapping spray 420mL　EA921S-5

Cutting Oil, non-chlorine type　 Z-217

Convenient Cutting Oil Essential for Metal Processing
This cutting oil is applied during metal cutting and tapping.