AS ONE Corporation

ASTOOL Parts & Brake Cleaner AT　AT-840mL

Quick-drying type, can be used for oil and fat cleaning, dust removal, disassembly/assembly, finish cleaning, etc.
This degreasing detergent does not contain chlorofluorocarbons or chlorinated solvents, and is not subject to the organic solvent poisoning prevention regulations.

Non-flammable parts cleaner　NR-20

Non-combustible parts and brake cleaner with no flash point can avoid fire and fire accidents.
It is a non-dangerous object under the Fire Service Act.

AS ONE Corporation

AS TOOL Parts & Brake Cleaner AT 30 Pieces　AT-840mL

A quick-drying type, it can be used for oil and fat cleaning, dust removal, disassembly and assembly, finish cleaning, etc.
This degreasing detergent does not contain CFCs or chlorinated solvents and is not subject to the organic solvent poisoning prevention regulations.

Kasuga Denki

Antistatic Iolizer R 420 mL　#3001

Excellent clarity, quick drying and easy to use.
It has excellent surface adhesion, abrasion resistance and antistatic properties.

Volatile Rust Prevention Bag (Ziplock) 83 x 127mm 1 bag (500 Pieces) and others

COSMOBEAUTY Co., Ltd.

Lubricant (clean bar) 420mL　601S11520

Provides excellent lubrication, rust prevention, and dehumidification.
The strong seepage force provides lubrication to parts of the machine that have become immobile or rusted bolts, nuts and screws.

SLIDE

Silicon Spray SLIDE　40112N

Silicon spray with high heat resistance.
Chlorine-free.

SHIN-EI SANGYO CO., LTD.

Oil-Splitting Detergent Class One Sea (Neutral Type) 4L and others

Pasted Red Touch For Inspection and others

JTC

Gasket Remover　JTC5815X

Based on the motto of "the ultimate tool for all professionals," JTC always prepares more than 3000 items such as automobile maintenance tools according to users' needs.

HOZAN TOOL INDUSTRIAL CO., LTD.

PC board protector　Z-272

To form an insulating film that prevents moisture absorption and solder corrosion on finished printed circuit boards

HOZAN TOOL INDUSTRIAL CO., LTD.

Mat Cleaner, Cleaning Supplies　Z-276

Dedicated cleaner for conductive mats
For cleaning all types of mats such as workbenches, shelves, and floors

HOZAN TOOL INDUSTRIAL CO., LTD.

Antistatic Cleaner, Cleaning Supplies　Z-292

HOZAN TOOL INDUSTRIAL CO., LTD.

Overhaul Cleaner, Cleaning Supplies　Z-294

Parts cleaner for a wide range of oily grease stains to water-soluble mud stains

HOZAN TOOL INDUSTRIAL CO., LTD.

Overhaul Cleaner, Cleaning Supplies　Z-294-L

Z-294 Large can equivalent to about 52 bottles.

HOZAN TOOL INDUSTRIAL CO., LTD.

Contact Spray　Z-295

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •.

TRUSCO NAKAYAMA CORPORATION

Metal sheet soluble oil type 18L and others

TRUSCO NAKAYAMA CORPORATION

Metal sheet emulsion emulsion type 18L and others

TRUSCO NAKAYAMA CORPORATION

Metal sheet chemical solution type 18L and others

Sumico Lubricant Co., Ltd.

Coolant (tapping paste) Sumi Power Tap paste Super 1kg　STP-10

Ideal for hard-to-cut machining of stainless steel, etc.
It is a paste cutting agent.

Nihon Kohsakuyu Co., Ltd.

Tapping paste C-101 (general Metal) 1kg and others

Nihon Kohsakuyu Co., Ltd.

Tapping paste C-100 (chlorine Type) 1kg and others

Nihon Kohsakuyu Co., Ltd.

Tapping paste C-101C (copper Alloy) 1kg　C-101C-1

Improves finish and work efficiency and extends tool life.
You can brush and brush.

R-GOT

Stencolorin Green 1L　R-4

In order to suppress heat generation during machining, an appropriate composition cutting edge can be obtained.
Difficult processing is easy, and it finishes beautifully.

FINE CHEMICAL JAPAN Co., Ltd.

Tapping compound A 420ml　FC-181

Reduces high temperature during cutting and prevents scratching.
For all metal tapping, screwing and drill reaming.

FINE CHEMICAL JAPAN Co., Ltd.

Fine Oil V Spray 420ml　FC-182-S

Light press, cutting and lubricating oil that disappears naturally.
No oil cleaning process is required after pressing or cutting.

TRUSCO NAKAYAMA CORPORATION

Α Tapping Spray difficult-to-machine material for 420ml and others

TRUSCO NAKAYAMA CORPORATION

Mori Tapping Spray high-performance cutting 420ml　MTS-420SP

This is a high-performance cutting spray that contains molybdenum disulfide, CI (chlorine) -based, P (phosphorus) -based extreme pressure additives, rust and corrosion inhibitors.
Reduces cutting resistance and prevents heat generation.

TRUSCO NAKAYAMA CORPORATION

Α Tapping Non Gas type difficult-to-machine material for Replacement Plastic bottle 350ml　ECO-TS-C

For difficult-to-cut machining of stainless steel, etc., and provides beautiful grinding.
Can be machined with light torque with no hard cutting and no mush.

TRUSCO NAKAYAMA CORPORATION

Mori Tapping Non Gas type high-performance cutting Exchange Plastic bottle 350ml　ECO-MTS-C

This is a high-performance cutting spray that contains molybdenum disulfide, CI (chlorine) -based, P (phosphorus) -based extreme pressure additives, rust and corrosion inhibitors.
Reduces cutting resistance and prevents heat generation.

TRUSCO NAKAYAMA CORPORATION

Α Tapping Oil difficult-to-machine material for 4L and others

TRUSCO NAKAYAMA CORPORATION

Mori Tapping Oil 1L and others

TRUSCO NAKAYAMA CORPORATION

N2 Tapping Spray Eco fresh minutes satisfiability 270ml　N2-TSE

This is an environmentally friendly biodegradable cutting agent that uses vegetable oils as its main ingredient and has low smoke and odor. (Does not contain chlorine, sulfur, or heavy metals) The injection gas uses nonflammable nitrogen gas, which is contained in about 75% of the atmosphere.
Tap die processing.

DAIZO CORPORATION

Add Moss A S-02 Tapping Spray 420ml　4006340

Because it is a grease type, it has less scattering and dripping than an oil type, better stopping on the cutting edge, and produces an excellent cutting effect by applying only a small amount. It is an economical product with little loss.
Prevents heat generation, improves finish accuracy, and greatly extends tool life. The cutting powder is discharged well.

Sumico Lubricant Co., Ltd.

Coolant (additive, Oil) smykow Ultra sheet 300ml　SUC-3

Oil-like water-insoluble cutting agent containing extreme pressure agent. (Additives) Heavy cutting of stainless steel and hard alloys.
Drill, tap, and reamer.

Repco Co., Ltd.

Vegetable Cutting Oil suspension but (baud 340ml and others

TRUSCO NAKAYAMA CORPORATION

Α bousseinon Gas type Exchange Plastic bottle 350ml　ECO-AR-C

Rust prevention spray with excellent water displacement and oil burn control.
Since it does not use injection gas (LPG), it is safer and more environmentally friendly than aerosol spray.

TRUSCO NAKAYAMA CORPORATION

Α bow assay oil 4L and others

KURE Engineering Ltd. (KURE)

3-36 430ml and others

TRUSCO NAKAYAMA CORPORATION

Anti-rust Spray colorless 420ml and others