Capillary Rise Method Surface Tension Meter　DG-1

It can be easily and quickly measured with a small sample.

AS ONE Corporation

Melting Point Meter (Digital setting type) and others

AS ONE Corporation

Friction Tester Replacement Drum　MSS-D

Antistatic agent is applied to prevent static electricity.

AS ONE Corporation

Powder Metering and Feeding Machine (Screw Type)　PSF-200SA

In the normal mode, the feed speed and time can be set so that the same amount of feed can be supplied each time.
In the weighing mode, the powder is fed to the set value while the sample is weighed (An electronic balance and communication cable are required separately).

TOMY SEIKO CO., LTD.

Ultrasonic generator　UR-21P

Maximum output 10 W, tip tip 2.5 mm.
It is suitable for crushing a small amount of sample which is scattered in an ordinary ultrasonic generator.

IKA

torque measuring instrument　Starvisc 200-2.5 control

Measure and display the viscosity even during stirring.
A torque measuring agitator can measure and display viscosity even during stirring.

AS ONE Corporation

Melting Temperature Measurement Device and others

AS ONE Corporation

Vibration Testing Machine Attachment　CV-101A

Mounting/fixing hole pitch: 25 mm(2 x 6), mounting hole (for M5 x 12), fixing hole (phi 6.0 x 12)

AS ONE Corporation

Abrasion Tester 25rpm and others

AS ONE Corporation

Basic drop tester　RKS-1

This tester holds the sample in the chuck and allows it to fall naturally from any set height and angle.
The height and angle are calibrated for excellent reproducibility.

AS ONE Corporation

Simple reciprocating wear tester approx. 7kg and others

AS ONE Corporation

Simple Weathering Tester UV-A and others

AS ONE Corporation

pencil scratch hardness tester　PHT-45

Conforms to JIS K 5600.
The pencil is designed to be held at 45 degrees with a 750 g load on the tip, and the hardness and bond strength are measured with the hardness at which a scratch enters when caught.

AS ONE Corporation

Powder Measuring Feeder (Screw Type)　PSF-100SA

High-precision tabletop compact powder feeder - In normal mode, feed speed and time can be set to supply the same amount of powder every time.
In the weighing mode, the powder is fed to the set value while the sample is weighed (An electronic balance and communication cable are required separately).

SIBATA SCIENTIFIC TECHNOLOGY LTD.

Capillary for MEL-280 and others

SIBATA SCIENTIFIC TECHNOLOGY LTD.

Ammonium testing apparatus　063100-11

Reference Standard Ammonium Test Law of the Japanese Pharmacopoeia 17.
* The mount is not included in the product.

Hull Cell Test Equipment Replacement Anode Plate and others

Hull Cell Tank (Parallel Type)　B-55

Possible to used for plating bath development, plating bath performance evaluation and process control in plating plant.

YAMAMOTO-MS CO.,LTD

Halcell ® Test Apparatus 10 A Type 15 Set (with YPP15101 D)　B-52-1DWJ

It can be used for development of plating baths, performance evaluation of plating baths, and process management at plating sites.

Particle Size Measurement Device (Grind Meter) and others

Applicator Gauge Steel 25 and others

SANKO ELECTRONIC LABOLATORY CO., LTD.

Metal Detector Ty-30k and others

NIDEC DRIVE TECHNOLOGY CORPORATION

Digital Torque Meter and others

Testo K. K.

Digital Vibrometer　OH-580A

3 mode measuring of acceleration, speed, and displacement are possible.　
Max. holdfunction provided.

Bulk Density Measurement Device　KAM-01

Calculate the bulk density of the powder (g/mL) by dividing the weight of the powder falling from the hopper (g) by the volume of the receiving container (mL).
You can adjust the height of the powder drop.

Repose Angle Measurement Device　ASK-01

After the powder is dropped from above, the angle of repose of the powder deposited at the bottom is measured with a protractor.
You can adjust the height of the powder drop.

Portable Friction Meter Muse 94i-II　94i-

You can easily measure the coefficient of static friction between objects.
Multiple measurements are memorized and the number of measurements and the average static friction coefficient are displayed.

SANWA ELECTRIC INSTRUMENT CO., LTD. (Sanwa)

Laser power meter　LP10

Laser power can be measured from 0.01uW to 40.39 mW.
The light-receiving surface uses a diffusion sheet to suppress the return light.

Indicator TILTWATCH XTR　TILTWATCHXTR

This tilt detection indicator is suitable for the management of products that do not allow horizontal loading or falling.
Just peel off the backing paper and stick it on, which acts as a deterrent to the cargo handler.

Denuce' Surface Tension Tester　D

The surface tension of the liquid is measured at room temperature.
The platinum ring is brought into contact with the surface of the liquid, and the knob linked with the pointer on the front scale board is turned to read the moment when the platinum ring is separated from the liquid by the pointer.

MOTHERTOOL CO., LTD.

Probe for MT-801 and others

Surfgauge

contact angle meter　ST-2

Wettability test can be done by contact angle value.
Suitable for measuring samples that can not be cut.

Cavitation Meter (Ultrasonic Intensity Meter)　CM-3-100

No power required.
You can measure the strength of ultrasound in an ultrasonic cleaner.

Ihara Electronic Industries

Digital Line Width Measuring Instrument (Advanced)　AccuLineII

Conductor width (top/bottom) and insulation interval of printed wiring board can be measured.
Stand-alone, automatic measurement of conductor width (MAX.900 μm , MIN. 30 μm) is possible.

DAI-ICHI SOKUHAN WORKS

Grind Gauge (Grain Size Gauge) and others

DAI-ICHI SOKUHAN WORKS

Grind Gauge Scraper (Grain Size Gauge)　SK9225

Air Leakage Tester (Ultrasonic)　GS-5800

Ultrasound can be used to check for air leaks.
It can be used to test the sealability of windows, to detect discharges in transformers, to detect vacuum leaks in valves, to diagnose bearings, etc.

Air Leakage Tester (Ultrasonic)　GS-400

Ultrasound waves sent from an ultrasonic generator (GS-400) are received by a detector (GS-5800 (sold separately)), which is used to identify the location of leakage.

TQC Sheen

Particle size meter (grindmeter) Measuring range: 0 ~ 15 micron and others

NAGANO KEIKI Co., Ltd.

Plain Coupled Meter (AA10-121 x -0.1/0.1MPA) and others