OSG SYSTEM PRODUCTS

Non-Wire Bar Coater Select-Roller L 60 Master　L60T

It is a one-piece molding with no wire wrapped around it, so there is no breaking or loosening.
It is resistant to clogging and has excellent washability.

ACTIVE

Sample Stand for Spin Coater (Suitable substrate size Φ 100 to 125 mm) and others

Film Thickness Meter and others

Mini Test 70 and others

Film Thickness Meter and others

Film Thickness Measuring Equipment for Dry　455

By cutting the coating surface with a chip with a fixed angle and observing the cut edge with a microscope, the coating thickness can be easily measured.
Suitable for measuring various materials such as iron, non-iron, resin, wood, concrete and pottery.

Film Thickness Measuring Equipment for Dry Replacement Tip No. 1　

Film Thickness Measuring Equipment for Dry Replacement Tip No. 4　

Film Thickness Measuring Equipment for Dry Replacement Tip No. 5　

Film Thickness Measuring Equipment for Dry Replacement Tip No. 6　

JFE Advantech

Ultrasonic Thickness Gauge and others

JFE Advantech

Ultrasonic Thickness Gauge with English Calibration Certificate　TI-70L

Measurements can be made only by touching the probe from one side, and thickness can be measured non-destructively.
It can be used immediately by adjusting the zero point and sound speed.

JFE Advantech

Ultrasonic Thickness Gauge with Chinese Calibration Certificate　TI-70L

Measurements can be made only by touching the probe from one side, and thickness can be measured non-destructively.
It can be used immediately by adjusting the zero point and sound speed.

JFE Advantech

Ultrasonic Thickness Gauge with English Calibration Certificate　TI-70K

Measurements can be made only by touching the probe from one side, and thickness can be measured non-destructively.
It can be used immediately by adjusting the zero point and sound speed.

JFE Advantech

Ultrasonic Thickness Gauge with Chinese Calibration Certificate　TI-70K

Measurements can be made only by touching the probe from one side, and thickness can be measured non-destructively.
It can be used immediately by adjusting the zero point and sound speed.

ACTIVE

Spin Coater ACT-220AII (Main Unit) and others

ACTIVE

Spin Coater ACT-220AII Vacuum Pump (For Substrate Sucking) and others

FICHER INSTRUMENTS

Pocketable Small Film Thickness Meter Built-in Probe Type and others

FICHER INSTRUMENTS

Pocketable Small Film Thickness Meter Integrated Probe Type USB Connection with English Calibration Certificate　DUALSCOPEMP0R-FP

Both electromagnetic and eddy current (automatic switching) type.
The eddy current method is suitable for measuring non-magnetic coatings on non-magnetic metals (anodized aluminum, Cu, stainless steel insulating coatings, paint, etc.).

FICHER INSTRUMENTS

Pocketable Small Film Thickness Meter Integrated Probe Type USB Connection with Chinese Calibration Certificate　DUALSCOPEMP0R-FP

Both electromagnetic and eddy current (automatic switching) type.
The eddy current method is suitable for measuring non-magnetic coatings on non-magnetic metals (anodized aluminum, Cu, stainless steel insulating coatings, paint, etc.).

Glass table with clamp 254 x 355mm　10x14

It is a glass table for coating with an applicator or barcoater.
It has a clamp so you can pinch the specimen.

Wireless barcoater approx. φ76.2μm and others

Barcoater approx. φ76.2μm and others

TQC Sheen

Wet Film Thickness Gauge　LD2030

The gauge is applied vertically on the undried paint film and the film thickness is measured by reading where the paint is applied.

TQC Sheen

Square wet film thickness gauge measuring range: 20 ~ 370 micrometers and others

TQC Sheen

Wet film thickness measuring instrument measuring range: 0 ~ 100 micrometers and others

FIB Sample Table for Sample Preparation Fine Grid Molybdenum 25 Pieces and others

A&D

Dual Type Film Thickness Gauge　AD-3256

This measuring instrument can measure the thickness of paint on automobiles and bridges.
It automatically identifies the metal to be measured and measures it using the appropriate measurement method (Electromagnetic induction type, eddy current type).

A&D

Battery lid and others

A&D

Dual Type Film Thickness Gauge with General Calibration　AD3256-00A00

It comes with a general calibration certificate.
This measuring instrument can measure the thickness of paint on automobiles and bridges.

EPK

Electromagnetic Film Thickness Meter Smart Test F2.6 and others

EPK

Magnetic Pull-Off Type Film Thickness Meter Micro Test G6 and others

CUSTOM corporation

Calibration Plate Set for TG-01U and others

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integral Dual use Film Thickness Meter Single Function type with English Calibration Certificate　SAMAC-FN

Base metal is automatically discriminated and measured.
Can be measured in the dark with the back light.

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integral Dual use Film Thickness Meter Single Function type with Chinese Calibration Certificate　SAMAC-FN

Base metal is automatically discriminated and measured.
Can be measured in the dark with the back light.

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integral Dual use Film Thickness Meter high Function type with English Calibration Certificate　SAMAC-PRO

Base metal is automatically discriminated and measured.
Can be measured in the dark with the back light.

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integral Dual use Film Thickness Meter high Function type with Chinese Calibration Certificate　SAMAC-PRO

Base metal is automatically discriminated and measured.
Can be measured in the dark with the back light.

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integrated Electromagnetic Coating Thickness Gauge with English Calibration Certificate　SAMAC-F

simple film thickness gauge
shipbuilding industry

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integrated Electromagnetic Coating Thickness Gauge with Chinese Calibration Certificate　SAMAC-F

simple film thickness gauge
shipbuilding industry

A&D

Ultrasonic Thickness Meter　AD-3255

[Application]
For thickness measurement of a wide range of materials such as metal, glass, plastic, ceramic, and epoxy