MIRUC OPTICAL

Tilt Stage　AIC-60

It slopes like a seesaw and can be fixed by clamp lever at any position.
The tilt stage is a simple ±20° stage.

MIRUC OPTICAL

Cross hole slider　CROSSHOLESLIDER

There is also a shaft mounting hole in the back, so you can insert the shaft anywhere in the cross direction with the tightening lever.
φ14 90 mm from the center of the shaft mounting hole to the optical axis.

MIRUC OPTICAL

Front Lock Stage Z-axis and others

MIRUC OPTICAL

FR Stand　FR STAND

Since the arm moves flexibly, the setting of the mirror unit can be made freely.
When the center lock knob is tightened, the three indirect arm bends can be firmly fixed simultaneously.

MIRUC OPTICAL

Rotational Stage　KTS-40

This stage rotates smoothly 360° manually.
Can also be mounted upside down.

MIRUC OPTICAL

Toolmalcers Microscope and others

MIRUC OPTICAL

Toolmalcers Microscope and others

MIRUC OPTICAL

Toolmalcers Microscope and others

MIRUC OPTICAL

MG Stand　MGSTAND

A magnet stand that can be easily attached to machines and devices.
The construction is sturdy, so it is a necessity for hard work sites.

MIRUC OPTICAL

White ring LED illumination device　ML-1

Long life and low power consumption ring lighting provides uniform light without flickering or uneven lighting.
It is possible to switch ON/OFF and adjust the amount of light in the main body of the light.

MIRUC OPTICAL

illumination device　ML-8

The LED lighting section has an outer diameter of Φ40, making it a compact, lightweight, low-cost lighting device.
It can save space during installation, and is ideal for applications that may interfere with the surrounding area, such as equipment installation.

MIRUC OPTICAL

MX-S Stand　MX-S STAND

A stand with a magnetic combination of MX sliders.
Since the direction set is freely slidable on three axes, it is very convenient for applications such as rapid movement of the lens barrel optical system to X, Y, and Z and positioning adjustment.

MIRUC OPTICAL

MY-S Stand　MY-S STAND60

A simple stand with a magnetic combination of MY sliders.
Slides 20 mm.

MIRUC OPTICAL

Slider　SLIDER

It is standard on the MS/MFS/ZLS series, the KZS/MWS-1 (B), and the VS/VZS-45.
φ14 90 mm from the center of the shaft mounting hole to the optical axis.

MIRUC OPTICAL

TR slider　TRSLIDER

This long size slider is ideal for use with deep pockets.
φ14 120 mm from the center of the shaft mounting hole to the optical axis.

MIRUC OPTICAL

Long-focus microscopes　WL-1-FR

It is suitable for applications that require an optical system with a particularly long operating distance, such as when there is no space to insert into the device due to interference with the surroundings, or when observing from a distance.
Incorporation of machines and equipment, alignment of workpieces, etc.

MIRUC OPTICAL

Dovetail Stage and others

MIRUC OPTICAL

Long Stage and others

MIRUC OPTICAL

Multi-function Screw Feed Stage X-axis and others

MIRUC OPTICAL

Dovetail Stage and others

MIRUC OPTICAL

Thin XY Rotational Stage and others

MIRUC OPTICAL

Dovetail Stage and others

MIRUC OPTICAL

Multi-function Screw Feed Stage Z-axis and others

MIRUC OPTICAL

［Discontinued］Toolmalcers Microscope and others

MIRUC OPTICAL

［Discontinued］MZ Stand　MZSTAND

Installation type triaxial sliding holder.
Utilizing the characteristics of the ant groove sliding type, it slides smoothly even with long strokes, making it ideal for incorporating machines and equipment.