Small Universal Magnet Stand 17kgf and others

Hydraulic Universal Magnet Stand 257mm 80kgf and others

TRUSCO NAKAYAMA CORPORATION

Magnet Base Adjuster with Adsorption force (N): 800　TMA-80

You can fine-tune the holding direction of measuring instruments with the adjuster. (Fine range: 2 mm)
Can be used as a measuring instrument holder.

TRUSCO NAKAYAMA CORPORATION

Magnet Base weight Strut Type Adsorption force (N): 800　TMP-80

Since the main column and post are thick, the measuring instrument can be held stably.
Can be used as a retainer for measuring instruments.

TRUSCO NAKAYAMA CORPORATION

Mini Type Magnet Base Adsorption force (N): 250　TMM-25

Handy type with small, light weight and 250 N suction.
Can be used as a retainer for measuring instruments.

TRUSCO NAKAYAMA CORPORATION

Magnet type mini Base of Laser Equipment Adsorption force (N): 200　M-A

Can be set at any angle with one touch.
The magnet section is not ON/OFF.

KANETEC CO., LTD.

High Rigidity Magnet Stand Adsorption force (N): 1230 and others

NOGAJAPAN Ltd.

Moth Popular Type Magnet Base Adsorption force (N): 800　MB1035

Widespread magnet base without slight motion feed.

NOGAJAPAN Ltd.

Moth Popular Type Magnet Base Adsorption force (N): 800　MB1030

Popular magnet base with fine motion feed.

NOGAJAPAN Ltd.

Clamp Type Dial Gauge holder Adsorption force (N): 800　PH2040

You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

Popeye Stands Adsorption force (N): 320　PH3100

You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

Weight class Clamp Type Dial Gauge Adsorption force (N): 1000　PH4016

You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

PH Mini Holder of Laser Equipment Adsorption force (N): 150　PH5000

This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

KANETEC CO., LTD.

Borer Base of Laser Equipment Adsorption force (N): 137 and others

TRUSCO NAKAYAMA CORPORATION

Magnet Base Small lock Function with Adsorption force (N): 250　TML-25

Small magnet base with lock function.
Can be used as a retainer for dial gauge, dial indicator, etc.

BIG DAISHOWA SEIKI Co., Ltd.

Archy Stands Adsorption force (N): 500　AM-M

It is a flexible arm stand with secure lock by the patented cam mechanism.
Since the moving part is covered with rubber, it shuts out dust.

BIG DAISHOWA SEIKI Co., Ltd.

Archy Stands Strong Type Adsorption force (N): 1000　ASP-M

It is a strong type that has become tough.
It is a flexible arm stand with secure lock by the patented cam mechanism.

BIG DAISHOWA SEIKI Co., Ltd.

Archy Stands mini Type Short Arm Adsorption force (N): 350　AMM-M

The flexural rigidity of the short arm is greatly increased.
It is a flexible arm stand with secure lock by the patented cam mechanism.

BIG DAISHOWA SEIKI Co., Ltd.

Archy Stands mini Type Long Arm Adsorption force (N): 350　AML-M

The flexural rigidity of the short arm is greatly increased.
It is a flexible arm stand with secure lock by the patented cam mechanism.

NOGAJAPAN Ltd.

Popeye Flex Adsorption force (N): 320　NF1021

Since the gauge's fine motion feed device is located just above the magnet, zero point alignment of the gauge can be achieved instantly without shaking.
The fine adjustment screw can be moved all around so that the gauge can be inclined in any direction by 360°.

NOGAJAPAN Ltd.

Mini Holder of Laser Equipment Adsorption force (N): 320 and others

NOGAJAPAN Ltd.

Popeye Flex Adsorption force (N): 320 and others

NOGAJAPAN Ltd.

LC Mini Holder of Laser Equipment Adsorption force (N): 150　LC6200

By tightening the knob in the center, the three joints are locked tightly.
A mini holder with a round shape and powerful (20kgf) small magnet.

NOGAJAPAN Ltd.

DG Holder of Laser Equipment Dual fine adjustment adsorption force (N): 800　DG6160

By tightening the knob in the center, the three joints are locked tightly.
Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.

NOGAJAPAN Ltd.

Weight class Dial Gauge holder Adsorption force (N): 800　MG61003

By tightening the knob in the center, the three joints are locked tightly.
The tip fine adjustment mechanism makes zero point alignment easy.

NOGAJAPAN Ltd.

Weight class Dial Gauge Holder of Laser Equipment Adsorption force (N): 800　MG10503

Since the one-touch hand fine motion feed mechanism is attached just above the magnet, the zero point alignment of the gauge can be made instantly without touching the arm.
The arm joint type holder tightens the knob in the center to firmly lock the three joints.

NOGAJAPAN Ltd.

Bottles Adsorption force (N): 1300　MA61003

The tip fine adjustment mechanism makes zero point alignment easy.
By tightening the knob in the center, the three joints are locked tightly.

TRUSCO NAKAYAMA CORPORATION

Main pillar TM B-80 and others

TRUSCO NAKAYAMA CORPORATION

TM L-25 for mini rocka and others

Shinwa Rules Co., Ltd.

Magnet Stand A Standard Type and others

Shinwa Rules Co., Ltd.

Main column magnet stand for both A and A -2 and others

KANETEC CO., LTD.

Magnet Vice　MPV4

Width (mm): 170
Depth (mm): 110

NOGAJAPAN Ltd.

Noga dual fine adjustment type MG Holder of Laser Equipment　MG6161

Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.
Test indicator and dial gauge holder.

NOGAJAPAN Ltd.

Noga dual fine adjustment type NF Holder of Laser Equipment　NF6160

Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.
Test indicator and dial gauge holder.

KANETEC CO., LTD.

Magnet Stand (Arm Type) High-Lock Mini Base with Fine Movement Adjuster Adsorption Force 160 N　MB-CX-V

Adsorption force (N): 160
Magnet Width (mm): 28

KANETEC CO., LTD.

Magnet Stand (Arm Type) High-Lock Mini Base with Fine Movement Adjuster Adsorption Force 300 N　MB-PSX-V

Adsorption force (N): 300
Magnet Width (mm): 30

KANETEC CO., LTD.

Magnet Base　MBS12B

Quantity: 1 Piece
Adsorption force (N): 250

KANETEC CO., LTD.

Flexible nozzle Holder　NHM1

Quantity: 1 unit
Adsorption force (N): 245

Mitutoyo Corporation

Individual Steel Gauge Block BM1 611736-04 and others

KANETEC CO., LTD.

Magnet base　MB-A2

Since two arms are provided for one base, it takes no space to install the base when performing simultaneous measurement of two points.
Mounting holes are also provided on the side of the base for various measurements.