[Time Electronic]Test & Measurement
Filters
-
Time Electronic Pneumatic Pressure Pump Kit 40bar 7090
hoses, fittings and carry case. Pneumatic Calibration Pump Kit 7090. Performance and rugged design with features including contoured cushioned handles for comfort and control, protective caging for the vent valve (guarding against accidental damage) and dual o-rings on all pistons to ensure zero leakage. Pressure to 40bar (600psi) Vacuum to -950 mbar Oversized check valve for smooth controlled operation Non-oil based lubricant used on all moving parts
1 products found
JPY: 416,000
USD: 2,607.66
-
Time Electronic Pneumatic Pressure Pump Kit 700bar 7095
hoses, fittings and carry case. Hydraulic Calibration Pump Kit 7095. Performance and rugged design with features including contoured cushioned handles for comfort and control, protective housing for the vent knob, a shatter-proof reservoir, and oversized check valves for smooth controlled operation. 0 – 700bar (10,000psi) Priming feature Triple filtration (prevents failure caused by dirt) Non-oil based lubricant used on all moving parts Built in pressure relief valve (prevents over pressurizing)
1 products found
JPY: 525,000
USD: 3,290.92
-
［Out of stock］Time Electronic 1061 Decade Box, Decade Box Type Resistance, Resistance Resolution 1Ω, Best Maximum Resistance Accuracy 1061
Time Electronics Model 1061 Resistance Decade Box. Time Electronics 1061 is a low-cost, robust resistance decade box designed to meet requirements for educational and industrial applications. Metal film resistors with a 0.75W power rating are used throughout, conferring the advantages of stability and low temperature coefficient. Six large switches with clear numerical readout enhance ease-of-use. Slim-line design minimises take-up of bench space. 1% accuracy and wide range facilitate production or select-on-test usage. The case provides complete electrostatic screening. Resistance is selected by dialling the required value, using the rotary switches. This enables precise setting with clear unambiguous indication. Number of decades:6 Range/resolution 1.2 MΩ / 1Ω steps Accuracy ±1% In-line readout Low temperature coefficient, 100 ppm/°C Residual resistance <150 mΩ Power rating 0.75W per resistor Voltage Rating: Maximum 300 V DC/AC RMS Mechanically and electrically robust Front panel safety terminals (compatible with 4mm shrouded plugs, standard plugs, bare wires, spade terminals) Fully screened Dimensions 355(W) x 63(H) x 82(D) mm, weight 0.75kg
1 products found
JPY: 102,000
USD: 639.38
-
［Out of stock］Time Electronic 1041 Decade Box, Decade Box Type Resistance, Resistance Resolution 0.01Ω, Best Maximum Resistance 1041
Time Electronics Model 1041 Low Ohm Decade Resistance Box. Time Electronics 1041 is a precision low ohm resistance box designed for general laboratory work, including platinum resistance thermometry. The 1041 is compact and durable. It is housed in a robust metal case with removable protective rubber cover which facilitates use not only in the laboratory but also in the field. Excellent accuracy is achieved through using high stability metal film resistors. The 5-digit thumbwheel switch enables simple and precise setting with a clear indication of the resistance value. Range/resolution 0 - 1kΩ / 0.01 Ω steps High accuracy Clear visual indication, using colour-coded digits High stability Low temperature coefficient 50 ppm/°C Safety terminals (compatible with 4mm shrouded plugs, standard plugs, bare wires, spade terminals) Residual resistance <60 mΩ Power Rating 1W per resistor Voltage Rating: Maximum 100 V DC/AC RMS Suitable for PRT/RTD Removable protective cover Dimensions 215(W) x 100(H) x 120(D) mm Weight 1kg
1 products found
JPY: 148,000
USD: 927.73
-
［Out of stock］Time Electronic 1017 Multi Function Calibrator 1017
internal rechargeable Ni-Cad battery pack. Time Electronics Model 1017 DC Multifunction Voltage/Current/Resistance Calibrator. Time Electronics 1017 is a high performance portable multifunction calibrator with voltage, current and resistance ranges. Its combination of precision and simple operation gives it versatility for workshop and field operations. The batteries are automatically recharged when the mains supply is connected. The compact, durable plastic case, with tilt stand/carry handle, takes up minimal bench space and makes the 1017 readily transportable. The instrument's outstanding stability v temperature and time performance is because of the use of special computer-selected reference diodes and resistor technology. The low-thermal emf terminals reduce errors when working with microvolt signals. Digital deviation control allows the output to be increased and decreased in % terms from 0 to ±0.999%. This provides a direct readout of error and simplifies the recording results for calibration certificates. It enables the user to see immediately whether the unit under test is within specification. The 1017 is suitable for calibrating and simulating a wide range of instruments including thermocouples, transducers, 4 - 20 mA and 0 - 10 V transmitters and platinum resistance thermometers. DC voltage 10nV to 100V DC current 100nA to 100mA Resistance 10MΩ to 10kΩ Accuracy 0.0005% (50 ppm) 1 ppm setting resolution Noise <2 ppm (0.1 to 1Hz) Stability <5 ppm/day, <25 ppm/year Deviation control - voltage and current Battery or mains operation Dimensions 290 x 250 x 110 mm Weight 2.4kg
1 products found
JPY: 518,000
USD: 3,247.04
-
［Out of stock］Time Electronic 1024 Current & Voltage Calibrator 0 → 100 mA 1024
Time Electronics Model 1024 DC Current Calibrator with Null Measuring Facility. Time Electronics 1024 is a readily portable solid state battery-powered calibrator suitable for laboratory, field or industrial use. It incorporates Time Electronics' well-proven circuit techniques. Additionally, the null balance system enables the 1024 to be used for making accurate current measurement. Operation is by backing the current source output against the current to be measured, with the difference being displayed on a sensitive centre zone null meter. At the null point, there is no voltage drop across the 1024. Applications include calibration and testing of current-sensitive transducers, calibration and linearity tests (on digital and electronic current meters) and semiconductor parameter measurements (such as diode conduction voltages at specified current levels). Simply plugging the 1024 into a mains supply will charge its batteries - a front panel indicator serves as a supply on/off display and monitors the battery supply condition. Up to 100mA output 0.02% accuracy 10 ppm/hr stability Null facility Portable Dimensions 220(L) x 160(H) x 200(D) mm Weight 3.3kg Battery and mains operation
1 products found
JPY: 489,000
USD: 3,065.25
