[Wieland] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
- by Product group
- by Product
Sort by:
-
Wieland 8213 S, 4 Way, 1 Row, Straight PCB Header 25.352.3453.0
PCB Pin Headers. Headers for soldering onto PCBs, available in straight or elbow version Suitable for mating with plug-in terminal blocks Rated at 12A/250Vac/300Vdc Rec. hole size dia. 1.4mm Colour: grey
1 products found
JPY: 3,710
USD: 23.08
-
Wieland ST18 Series, Female 3 Pole Connector, Panel Mount, with Strain Relief, Rated At 16A, 250 V 93.031.9058.0
UL listed, CSA certified, OVE, SEV, N, UL, FI, VDE. ST18 Panel Mount Plugs and Sockets. Snap in, recessed panel mount connectors. Suited to a panel thickness of 0.5-1.2mm. Available with either screw or spring termination.
1 products found
JPY: 122,000
USD: 759.08
-
Wieland ST18 Series, Male to Female 3 Pole 3 Way Distribution Block, with Strain Relief, Rated At 16A, 400 V 93.030.5958.0
UL listed, CSA certified, OVE, SEV, N, UL, FI, VDE. The 5 way distribution block stock no. ; 213-4694 213-4694 is only suitable for use with jumper leads not with the rewireable connectors. ST18 Accessories. Rewireable connectors to increase flexibility Direct link for close coupling modules
1 products found
JPY: 84,400
USD: 525.14
-
Wieland Side Panel 01.001.5553.0
Modular support plates. These support plates comprise flanges and elements of varying widths to accept printed circuit board plates of 93mm in height and 22, 34.8, 45, 67, 89.6 or 111.6mm in width. The smallest plate is created by assembling the two lateral flanges. The modules are juxtaposable. The universal foot allows plates to be fitted onto all common DIN-EN rails.
1 products found
JPY: 1,160
USD: 7.22
-
Wieland Shock-Proof Feet 05.583.0053.0
Modular support plates. These support plates comprise flanges and elements of varying widths to accept printed circuit board plates of 93mm in height and 22, 34.8, 45, 67, 89.6 or 111.6mm in width. The smallest plate is created by assembling the two lateral flanges. The modules are juxtaposable. The universal foot allows plates to be fitted onto all common DIN-EN rails.
1 products found
JPY: 910
USD: 5.66
-
Wieland 8291, 6 Way PCB Terminal Strip 25.163.0653.0
Terminal Blocks. Terminal blocks for soldering onto PCBs Clamping arrangement ensures that the wire is protected 2, 3 and 6 way types available in a side stackable format without loss of pitch Two cross-sections are available: 1.5mm ;sup>2 ;/sup> or 2.5mm ;sup>2 ;/sup> Accessible test points M2.5 steel screws
1 products found
JPY: 5,100
USD: 31.73
-
Wieland 8375, 2 Way PCB Terminal Strip 25.700.0153.0
Modular PCB Screw Terminals. Modular PCB screw terminal system utilising rising clamp technology rated to 30A Snap together terminals (in bags of 10) can be stacked together for a 7.5mm pitch, or with spacers for a 10mm pitch Voltage Rating 7.5 pitch(500V), 10 pitch(690V) Option marking tags, which clip onto the housing, provide terminal identification Wire acceptance 4mm² Rec. PCB hole dia. 1.3mm Temperature Rating 115°C
1 products found
JPY: 4,240
USD: 26.38
-
Wieland 8292, 2 Way PCB Terminal Strip 25.193.0253.0
Terminal Blocks. Terminal blocks for soldering onto PCBs Clamping arrangement ensures that the wire is protected 2, 3 and 6 way types available in a side stackable format without loss of pitch Two cross-sections are available: 1.5mm ;sup>2 ;/sup> or 2.5mm ;sup>2 ;/sup> Accessible test points M2.5 steel screws
1 products found
JPY: 2,630
USD: 16.36
-
Wieland 8292, 3 Way PCB Terminal Strip 25.193.0353.0
Terminal Blocks. Terminal blocks for soldering onto PCBs Clamping arrangement ensures that the wire is protected 2, 3 and 6 way types available in a side stackable format without loss of pitch Two cross-sections are available: 1.5mm ;sup>2 ;/sup> or 2.5mm ;sup>2 ;/sup> Accessible test points M2.5 steel screws
1 products found
JPY: 3,920
USD: 24.39
-
Wieland SNO 4062 24 V ac/dc Safety Relay Dual Channel With 2 Safety Contacts SNO 4062K-A-00C
Stock no. ; 321-9077 321-9077 has input de-bouncing through "Monoflop" functionality and sensors for fast tactile applications. Incorporates soft reset functionality allowing the device to be reset locally upon encountering a short interrupt. SNO 4062K Safety Relay, Dual Channel. LED indication for supply voltage and safety circuits Automatic restart function available Contact current rating: 6A Conform to BS EN 60204 Part 1 1993; EN 954-1; IEC 204-1; VDE 0113 Dimensions (mm): H 96.5, W 22.5, L 114
1 products found
JPY: 71,200
USD: 443.01
-
WielandflareMove SPDT Non-Latching Relay DIN Rail, 24V dc Coil, 6A 80.063.4032.0
UL and CSA. Terminal Block Relay Solid State. DIN rail mounting and only 6.2mm wide Input voltages of 24Vdc up to 230V ac Switching currents up to 2A Plug-in jumpers to link common potentials Status LED Marking facility 20 Pole jumper comb available with continuous current up to 36A
1 products found
JPY: 1,870
USD: 11.64
-
WielandflareMove SPDT Non-Latching Relay DIN Rail, 24V dc Coil, 20mA PSB246-2IRG
UL and CSA. Terminal Block Relay Solid State. DIN rail mounting and only 6.2mm wide Input voltages of 24Vdc up to 230V ac Switching currents up to 2A Plug-in jumpers to link common potentials Status LED Marking facility 20 Pole jumper comb available with continuous current up to 36A
1 products found
JPY: 2,460
USD: 15.31
-
Wieland Busbar for use with 38 Series 80.063.4029.1
UL and CSA. Terminal Block Relay Solid State. DIN rail mounting and only 6.2mm wide Input voltages of 24Vdc up to 230V ac Switching currents up to 2A Plug-in jumpers to link common potentials Status LED Marking facility 20 Pole jumper comb available with continuous current up to 36A
1 products found
JPY: 870
USD: 5.41
-
Wieland SNO 4003 24 V ac/dc Safety Relay Dual Channel With 3 Safety Contacts R1.188.0500.1
SNO 4003K Safety Relay, Single Channel. LED indication for supply voltage and safety circuits Automatic restart function available Contact current rating: 6A Conform to BS EN 60204 Part 1 1993; EN 954-1; IEC 204-1; VDE 0113 Expansion units or external contacting units (with positively driven contacts) may be used Dimensions (mm): H 96.5, W 22.5, L 114
1 products found
JPY: 66,400
USD: 413.14
-
Wieland SNZ 4052 24 V ac/dc Safety Relay Dual Channel With 2 Safety Contacts R1.188.0530.1
SNZ 4052K Safety Relay for Two Hand Control, Type IIIC. All units conform to BS EN 60204 Part 1 1993; EN 954-1; IEC 204-1; VDE 0113. Dimensions (mm) for all units: H 96.5, W 22.5, L 114,Contact Rating: 6A for all units. Colour supplied may vary from that shown. Stop category 0 LED indication for supply voltage and safety circuits Simultaneity check ;0.5s
1 products found
JPY: 55,600
USD: 345.94
-
Wieland, WK Series , 1 kV Feed Through Terminal Block, Screw Termination 57.503.0055.0 - WK 2,5 / U /V0
Feed-Through Blocks with Screw Connection, Universal Mounting, Type WK
1 products found
JPY: 2,980
USD: 18.54
-
Wieland, WK Series , 800 V Feed Through Terminal Block, Screw Termination 57.504.0055.0 - WK 4 / U /V0
Feed-Through Blocks with Screw Connection, Universal Mounting, Type WK
1 products found
JPY: 3,070
USD: 19.10
-
Wieland, WK Series , 800 V Feed Through Terminal Block, Screw Termination 57.504.9055.0 - WK 4 SL / U /V0
Ground Blocks with Screw Connection, Universal Mounting, Type WK. Enclosed design Suitable for fine stranded and solid wire
1 products found
JPY: 9,870
USD: 61.41
-
Wieland, Grey, WK Series, 6.3A Single Fused DIN Rail Terminal 57.904.5355.0 - WK 4 / THSI5...U/V0
VDE 0820 T2/IEC 257. Fuse Block with Universal Foot, Type W/K. Fuse terminals of this type have a hinged fuse carrier. This takes the mini 5 x 20, 5 x 25, and 5 x 30 mm (width of terminal 8mm) or 6.3 x 32 mm (width 10 mm). The swivel carrier has locking points both when open and closed and can be sealed. Rated current in accordance with: VDE 0820 T2/IEC 257 1) up to a power loss of 1.5 W 2) up to a power loss of 2.5 W *) Voltage and current are determined by the fuse used.
1 products found
JPY: 18,700
USD: 116.35
-
Wieland, WK Series , 800 V Knife Disconnect Terminal Block, Screw Termination 57.504.2055.0
Knife Edge Disconnect Terminal, Type WK4/TKM. The disconnecting knife in this WK version swings in and out on a pivot point. The distinctive color of the disconnecting lever signals the open state. The terminals can be connected with the lever open or closed. Designs with a different number and arrangement of test sockets permit reliable measurements using the test plug.
1 products found
JPY: 8,760
USD: 54.51
-
Wieland SNO 4083 24 V dc Safety Relay Dual Channel With 3 Safety Contacts R1.188.3580.0 - SNO4083KM-A
Wieland SNO 4083KM Safety Relay. SNO 4083KM Safety Relay Function - after the supply voltage is applied to terminals A1/A2 and the safety inputs are closed, the enabling current paths (NO contacts) are closed and the signal current path (NC contact) is opened automatically or by pressing the reset button (manual monitored start). When the safety inputs are opened/de-energized the enabling current paths (NO contacts) are opened immediately and the signal current path (NC contact) is closed. The SNO 4083KM safety relay requires fewer connection cables, irrespective of whether operation with or without cross monitoring is desired. The two channel control of the SNO 4083KM is carried out by either an NC/NC or an NC/NO combination of the safety sensor. In the case of two channel control of the device, a synchronous time is automatically monitored between the two channels. The SafeStart function is used with a manual start, the reset input is automatically monitored for a rising and falling signal edge. The Monoflop function is integrated into the safety relay and prevents device interlocking under all circumstances. Simple diagnosis is possible thanks to an intelligent display system that shows the user the different operating modes of the safety relay in its different applications. Monitoring of E-Stop, Safety Gate and Light Barrier applications Stop Category 0 according to EN 60204-1 Single channel or two channel control Two-channel control with NC/NC or NC/NO Manual or automatic start Cross monitoring Synchronous time monitoring for two channel control 3 enabling current path / 1 signalling current path Screw terminals, pluggable Up to PL e / Category 4 (EN ISO 13849-1) Up to SIL ;sub>CL ;/sub> 3 (EN 62061)
1 products found
JPY: 85,000
USD: 528.87
-
Wieland SNO 1012 24 V ac/dc Safety Relay Single Channel With 2 Safety Contacts R1.188.3740.0 - SNO1012K-A
Wieland SNO 1012K Safety Relay. SNO 1012K Safety Relay Function - after the operating voltage (L+/L1) is applied via an unactuated emergency stop button or safety gate contact on A1 and A2, the device can be switched on via a Y1/Y2-connected reset button. When the device is on, the internal relays K1 and K2 are energized and the enabling current paths 13/14 and 23/24 are closed. When the emergency stop button or the safety gate contact is actuated, the current supply of the internal relays is interrupted and the enabling current paths are opened. Monitoring of E-Stop and Safety Gate applications Stop Category 0 according to EN 60204-1 Single-channel control Manual or automatic start 2 enabling current paths Check of external contactors (EDM) Compact design Up to PL d / Category 2 (EN ISO 13849-1) Up to SIL ;sub>CL ;/sub> 2 (EN 62061)
1 products found
JPY: 58,200
USD: 362.12
-
Wieland AP WT 2.5 Series End Plate 07.313.2555.0 - AP WT 2,5-10
WT2.5 to WT10 End Plates. End plates for DIN rail terminal block type WT 2,5 - WT 10.
1 products found
JPY: 660
USD: 4.11
-
Wieland ST18 Series, Male 3 Pole Connector, with Strain Relief, Rated At 16A, 250 V 93.732.3350.0
UL listed, CSA certified, OVE, SEV, N, UL, FI, VDE. ST18 Cable Mount Plugs and Sockets. Three pole male and female connectors available as standard (single screw terminal), standard with cable strain relief (single cable diameter 6.5 - 8.3mm), standard with dual strain relief (two round cables 4.5 - 10mm or one flat cable) or double screw with dual strain relief (houses two separate screw terminals so that two cables may be terminated on one pole - ideal for lightchains, jumper connections or additional branches). Strain relief types include top cover.
1 products found
JPY: 67,900
USD: 422.47
-
Wieland ST18 Series, Female 3 Pole Connector, with Strain Relief, Rated At 16A, 250 V 93.731.3250.0
UL listed, CSA certified, OVE, SEV, N, UL, FI, VDE. ST18 Cable Mount Plugs and Sockets. Three pole male and female connectors available as standard (single screw terminal), standard with cable strain relief (single cable diameter 6.5 - 8.3mm), standard with dual strain relief (two round cables 4.5 - 10mm or one flat cable) or double screw with dual strain relief (houses two separate screw terminals so that two cables may be terminated on one pole - ideal for lightchains, jumper connections or additional branches). Strain relief types include top cover.
1 products found
JPY: 89,100
USD: 554.38
-
Wieland ST18 Series, Female 3 Pole Connector, with Strain Relief, Rated At 16A, 250 V 93.831.4350.0
UL listed, CSA certified, OVE, SEV, N, UL, FI, VDE. ST18 Cable Mount Plugs and Sockets. Three pole male and female connectors available as standard (single screw terminal), standard with cable strain relief (single cable diameter 6.5 - 8.3mm), standard with dual strain relief (two round cables 4.5 - 10mm or one flat cable) or double screw with dual strain relief (houses two separate screw terminals so that two cables may be terminated on one pole - ideal for lightchains, jumper connections or additional branches). Strain relief types include top cover.
1 products found
JPY: 168,000
USD: 1,045.30
-
Wieland ST18 Series, Male to Female 3 Pole 3 Way Distribution Block, with Strain Relief, Rated At 16A, 400 V 93.030.4853.0
UL listed, CSA certified, OVE, SEV, N, UL, FI, VDE. The 5 way distribution block stock no. ; 213-4694 213-4694 is only suitable for use with jumper leads not with the rewireable connectors. ST18 Accessories. Rewireable connectors to increase flexibility Direct link for close coupling modules
1 products found
JPY: 227,000
USD: 1,412.39
-
Wieland ST18 Series, Female 3 Pole Connector, Panel Mount, with Strain Relief, Rated At 16A, 250 V 93.031.9053.0
UL listed, CSA certified, OVE, SEV, N, UL, FI, VDE. ST18 Panel Mount Plugs and Sockets. Snap in, recessed panel mount connectors. Suited to a panel thickness of 0.5-1.2mm. Available with either screw or spring termination.
1 products found
JPY: 95,300
USD: 592.96
-
Wieland ST18 Series, Female 3 Pole Connector, Panel Mount, with Strain Relief, Rated At 16A, 250 V 93.031.9358.0
UL listed, CSA certified, OVE, SEV, N, UL, FI, VDE. ST18 Panel Mount Plugs and Sockets. Snap in, recessed panel mount connectors. Suited to a panel thickness of 0.5-1.2mm. Available with either screw or spring termination.
1 products found
JPY: 89,200
USD: 555.00
-
Wieland ST18 Series, Male to Female 5 Pole 5 Way Distribution Block, with Strain Relief, Rated At 16A, 400 V 93.030.5153.0
UL listed, CSA certified, OVE, SEV, N, UL, FI, VDE. The 5 way distribution block stock no. ; 213-4694 213-4694 is only suitable for use with jumper leads not with the rewireable connectors. ST18 Accessories. Rewireable connectors to increase flexibility Direct link for close coupling modules
1 products found
JPY: 351,000
USD: 2,183.92
-
Wieland ST16 Series, Male 2 Pole 2 Way Connector, with Strain Relief, Rated At 25A, 48 V 93.016.0053.0
UL listed, CSA certified, OVE, SEV, N, UL, FI, VDE. ST16 2 Pole Compact Connectors. A connector system ideal for low voltage lighting applications, incorporating the male and female connections in the same housing. The leads can be joined in series, or via the distribution block using the secure locking latch.
1 products found
JPY: 46,600
USD: 289.95
-
Wieland GST18 Series, Female 3 Pole 3 Way Connector, with Strain Relief, Rated At 16A, 250 V 99.429.5807.6
DIN VDE 0628, EN/IEC 61535 (in draft). UL 1977 approved for Use in Data, Signal, Control and Power Applications. Cable Mount Plugs and Sockets. Available in standard screw connection with or without strain relief. Strain relief version includes top cover. Also available in spring loaded connection versions
1 products found
JPY: 135,000
USD: 839.97
-
Wieland GST18 Series, Female 3 Pole 3 Way Connector, with Strain Relief, Rated At 16A, 250 V 92.933.0053.0
DIN VDE 0628, EN/IEC 61535 (in draft). UL 1977 approved for Use in Data, Signal, Control and Power Applications. Cable Mount Plugs and Sockets. Available in standard screw connection with or without strain relief. Strain relief version includes top cover. Also available in spring loaded connection versions
1 products found
JPY: 69,100
USD: 429.94
-
Wieland GST18 Series, Male 3 Pole 3 Way Connector, with Strain Relief, Rated At 16A, 250 V 92.934.0053.0
DIN VDE 0628, EN/IEC 61535 (in draft). UL 1977 approved for Use in Data, Signal, Control and Power Applications. Cable Mount Plugs and Sockets. Available in standard screw connection with or without strain relief. Strain relief version includes top cover. Also available in spring loaded connection versions
1 products found
JPY: 64,900
USD: 403.81
-
Wieland GST18 Series, Female 3 Pole Connector, Panel Mount, Rated At 16A, 250 V 92.031.7658.0
DIN VDE 0628, EN/IEC 61535 (in draft). Panel Mount Plugs and Sockets. Spring loaded connections for two ranges of wire sizes Panel cut out 33 x 15.6mm Cable Acceptance 0.5 to 1.5mm ;sup>2 ;/sup>
1 products found
JPY: 68,800
USD: 428.07
-
Wieland GST18 Series, Male 3 Pole Connector, Panel Mount, Rated At 16A, 250 V 92.032.7658.0
DIN VDE 0628, EN/IEC 61535 (in draft). Panel Mount Plugs and Sockets. Spring loaded connections for two ranges of wire sizes Panel cut out 33 x 15.6mm Cable Acceptance 0.5 to 1.5mm ;sup>2 ;/sup>
1 products found
JPY: 63,500
USD: 395.10
-
Wieland GST18 Series, Male Locking Clip for use with GST18i3-5 Cable to Cable Connector 05.587.3156.1
UL listed, CSA certified, OVE, SEV, N, UL, FI, VDE. The 5 way distribution block stock no. ; 213-4694 213-4694 is only suitable for use with jumper leads not with the rewireable connectors. GST18i Accessories. Rewireable connectors to increase flexibility Direct link for close coupling modules
1 products found
JPY: 11,700
USD: 72.80
-
Wieland GST18i6 Series, Female 6 Pole Female Connector, Cable Mount, with Strain Relief, Rated At 20A, 250 V 92.969.0358.1
Wieland Electric GST18i Plug-In Building Installation Connectors. GST18i plug-In building installation connectors designed for the quick, safe and easy connection and disconnection of electrical consumers to and from the electrical installation. These GST18i plug –in connections have robust machined solid metal contacts and are IP20 touch rated with a leading ground contact. Mechanical coding enables a clear and safe separation of different applications within the same system. Colour coding identifies the connections that belong together allowing ease of assembly and eliminating mismating. These GST18i plug-in connectors are fully intermateable with the existing GST18 connectors but feature a 20A capacity as opposed to the 16A capacity of the GST18 model. Features and Benefits. Quick and safe and connection and disconnection Robust machined solid metal contacts IP20 touch rated Mechanical coding for clear and safe separation of different applications Colour coding makes assembly easy and prevents mismating Fully intermateable with the existing GST18 connectors 20A current capacity Certified according to IEC 61535. Product Application Information. These GST18i plug and socket connectors are a versatile connector system ideal for the installation of lighting systems, switches, sunblinds and power sockets
1 products found
JPY: 154,000
USD: 958.19
-
Wieland GST18i6 Series, Female 6 Pole Female Connector, Cable Mount, with Strain Relief, Rated At 20A, 250 V 92.969.0358.1
Wieland Electric GST18i Plug-In Building Installation Connectors. GST18i plug-In building installation connectors designed for the quick, safe and easy connection and disconnection of electrical consumers to and from the electrical installation. These GST18i plug –in connections have robust machined solid metal contacts and are IP20 touch rated with a leading ground contact. Mechanical coding enables a clear and safe separation of different applications within the same system. Colour coding identifies the connections that belong together allowing ease of assembly and eliminating mismating. These GST18i plug-in connectors are fully intermateable with the existing GST18 connectors but feature a 20A capacity as opposed to the 16A capacity of the GST18 model. Features and Benefits. Quick and safe and connection and disconnection Robust machined solid metal contacts IP20 touch rated Mechanical coding for clear and safe separation of different applications Colour coding makes assembly easy and prevents mismating Fully intermateable with the existing GST18 connectors 20A current capacity Certified according to IEC 61535. Product Application Information. These GST18i plug and socket connectors are a versatile connector system ideal for the installation of lighting systems, switches, sunblinds and power sockets
1 products found
JPY: 3,480
USD: 21.65
-
Wieland GST18i6 Series, Male 6 Pole Male Connector, Cable Mount, with Strain Relief, Rated At 20A, 250 V 92.968.0358.1
Wieland Electric GST18i Plug-In Building Installation Connectors. GST18i plug-In building installation connectors designed for the quick, safe and easy connection and disconnection of electrical consumers to and from the electrical installation. These GST18i plug –in connections have robust machined solid metal contacts and are IP20 touch rated with a leading ground contact. Mechanical coding enables a clear and safe separation of different applications within the same system. Colour coding identifies the connections that belong together allowing ease of assembly and eliminating mismating. These GST18i plug-in connectors are fully intermateable with the existing GST18 connectors but feature a 20A capacity as opposed to the 16A capacity of the GST18 model. Features and Benefits. Quick and safe and connection and disconnection Robust machined solid metal contacts IP20 touch rated Mechanical coding for clear and safe separation of different applications Colour coding makes assembly easy and prevents mismating Fully intermateable with the existing GST18 connectors 20A current capacity Certified according to IEC 61535. Product Application Information. These GST18i plug and socket connectors are a versatile connector system ideal for the installation of lighting systems, switches, sunblinds and power sockets
1 products found
JPY: 150,000
USD: 933.30
