[Hydrotechnik] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
［Discontinued］Hydrotechnik Inline Hydraulic Test Point, SNA03 SNA03
Inline Pressure Test Point. Swivel nut adaptor inline pressure test point provides simple, low cost method of pressure measurement in hydraulic fluid system Test point allows quick connect access into systems without loss of fluid or pressure BSPP format male/female coupling has 60° coned ends allow easy connection between two hose joints Manufactured from steel with a zinc plated and yellow chromated surface finish
1 products found
JPY: 3,800
USD: 23.64
-
［Discontinued］Hydrotechnik Inline Hydraulic Test Point, SNA04 SNA04
Inline Pressure Test Point. Swivel nut adaptor inline pressure test point provides simple, low cost method of pressure measurement in hydraulic fluid system Test point allows quick connect access into systems without loss of fluid or pressure BSPP format male/female coupling has 60° coned ends allow easy connection between two hose joints Manufactured from steel with a zinc plated and yellow chromated surface finish
1 products found
JPY: 1,870
USD: 11.64
-
［Discontinued］Hydrotechnik Inline Hydraulic Test Point, SNA06 SNA06
Inline Pressure Test Point. Swivel nut adaptor inline pressure test point provides simple, low cost method of pressure measurement in hydraulic fluid system Test point allows quick connect access into systems without loss of fluid or pressure BSPP format male/female coupling has 60° coned ends allow easy connection between two hose joints Manufactured from steel with a zinc plated and yellow chromated surface finish
1 products found
JPY: 2,140
USD: 13.32
-
［Discontinued］Hydrotechnik Hydraulic Test Point 2103-01-33.00, M10 x 1 Male 2103-01-33.00
Minimess 1620 Test Point. Enables quick and easy connection to pressure gauges or test hoses Fitted with metal protective cap and securing chain Compact design allows use in positions where space limited Manufactured in steel with zinc plated and yellow chromated surface finish or in stainless steel 1.4104 Seal material is Buna N (steel body), Viton (stainless steel body) Connecting thread M16 x 2
1 products found
JPY: 2,750
USD: 17.11
-
［Discontinued］Hydrotechnik Hydraulic Test Point 2103-01-13.00, M12 x 1.5 Male 2103-01-13.00
Minimess 1620 Test Point. Enables quick and easy connection to pressure gauges or test hoses Fitted with metal protective cap and securing chain Compact design allows use in positions where space limited Manufactured in steel with zinc plated and yellow chromated surface finish or in stainless steel 1.4104 Seal material is Buna N (steel body), Viton (stainless steel body) Connecting thread M16 x 2
1 products found
JPY: 2,620
USD: 16.30
-
［Discontinued］Hydrotechnik Hydraulic Test Point 2103-01-14.00, M14 x 1.5 Male 2103-01-14.00
Minimess 1620 Test Point. Enables quick and easy connection to pressure gauges or test hoses Fitted with metal protective cap and securing chain Compact design allows use in positions where space limited Manufactured in steel with zinc plated and yellow chromated surface finish or in stainless steel 1.4104 Seal material is Buna N (steel body), Viton (stainless steel body) Connecting thread M16 x 2
1 products found
JPY: 2,630
USD: 16.36
-
［Discontinued］Hydrotechnik Hydraulic Pressure Test Kit 3101-16-XX.50, 630bar 3101-16-XX.50
Pressure gauges are NOT supplied with this kit and must be ordered separately (see Analogue Pressure Gauges). Pressure Test Kit 2. BSP and BSP swivel couplings Maximum pressure: 630 bar
1 products found
JPY: 22,100
USD: 137.51
-
［Discontinued］Hydrotechnik Inline Hydraulic Test Point, SNA01 SNA01
Inline Pressure Test Point. Swivel nut adaptor inline pressure test point provides simple, low cost method of pressure measurement in hydraulic fluid system Test point allows quick connect access into systems without loss of fluid or pressure BSPP format male/female coupling has 60° coned ends allow easy connection between two hose joints Manufactured from steel with a zinc plated and yellow chromated surface finish
1 products found
JPY: 3,580
USD: 22.28
-
［Discontinued］Hydrotechnik Hydraulic Test Point 2103-01-17.00, G 1/8 Male 2103-01-17.00
Minimess 1620 Test Point. Enables quick and easy connection to pressure gauges or test hoses Fitted with metal protective cap and securing chain Compact design allows use in positions where space limited Manufactured in steel with zinc plated and yellow chromated surface finish or in stainless steel 1.4104 Seal material is Buna N (steel body), Viton (stainless steel body) Connecting thread M16 x 2
1 products found
JPY: 1,560
USD: 9.71
-
［Discontinued］Hydrotechnik Hydraulic Test Point Hose S110-AC-FA-02.00, Connection A M16, Connection B G 1/4 S110-AC-FA-02.00
For measuring with liquid pressure media, bleed before connecting tube. Protect from fire, sharp corners and hot objects. Test Point Microbore Flexible Hose. Test point hose and test point pressure gauge adaptor enable remote monitoring of hydraulic system pressure through pre-installed test point connectors Test point hose designed for connecting test point connector to test point adaptor or directly to a pressure gauge 5mm hose outside diameter ensures flexibility and ease of routing through hydraulic components or pipework while maintaining a high pressure rating Minimum bend radius 20mm Pressure/temperature factor 122% (to 0°C), 110% (at 30°C), 100% (at 50°C), 86% (at 80°C), 77% (at 100°C), 68% (at 120°C)
1 products found
JPY: 5,080
USD: 31.61
-
［Discontinued］Hydrotechnik Steel G 1/4 Pressure Gauge Adapter 2103-07-01.62
Direct Pressure Gauge Adaptor. A BSP to M16 adaptor that enables connection of a pressure gauge direct to a pressure test point Pressure gauge sealing is by inner cutting face sealing ring, which is included
1 products found
JPY: 2,890
USD: 17.98
-
［Discontinued］Hydrotechnik Steel G 1/2 Pressure Gauge Adapter 2103-07-02.62
Direct Pressure Gauge Adaptor. A BSP to M16 adaptor that enables connection of a pressure gauge direct to a pressure test point Pressure gauge sealing is by inner cutting face sealing ring, which is included
1 products found
JPY: 6,510
USD: 40.51
-
［Discontinued］Hydrotechnik Hydraulic Pressure Test Kit 3101-18-XX.50, 630bar 3101-18-XX.50
Pressure gauges are NOT supplied with this kit and must be ordered separately (see Analogue Pressure Gauges). Pressure Test Kit 1. BSP and metric couplings Maximum pressure: 630 bar
1 products found
JPY: 12,300
USD: 76.53
-
［Discontinued］Hydrotechnik Hydraulic Pressure Test Kit 3101-19-XX.50, 630bar 3101-19-XX.50
Pressure gauges are NOT supplied with this kit and must be ordered separately (see Analogue Pressure Gauges). Pressure Test Kit 3. BSP, BSP swivel and metric couplings Maximum pressure: 630 bar
1 products found
JPY: 32,400
USD: 201.59
-
［Discontinued］Hydrotechnik Hydraulic Test Point 2303-01-18.10, G 1/4 Male 2303-01-18.10
Minimess 1620 Test Point. Enables quick and easy connection to pressure gauges or test hoses Fitted with metal protective cap and securing chain Compact design allows use in positions where space limited Manufactured in steel with zinc plated and yellow chromated surface finish or in stainless steel 1.4104 Seal material is Buna N (steel body), Viton (stainless steel body) Connecting thread M16 x 2
1 products found
JPY: 7,210
USD: 44.86
-
［Discontinued］Hydrotechnik Inline Hydraulic Test Point, SNA02 SNA02
Inline Pressure Test Point. Swivel nut adaptor inline pressure test point provides simple, low cost method of pressure measurement in hydraulic fluid system Test point allows quick connect access into systems without loss of fluid or pressure BSPP format male/female coupling has 60° coned ends allow easy connection between two hose joints Manufactured from steel with a zinc plated and yellow chromated surface finish
1 products found
JPY: 3,650
USD: 22.71
-
［Discontinued］Hydrotechnik Hydraulic Test Point Hose S110-AC-FA-01.00, Connection A M16, Connection B G 1/4 S110-AC-FA-01.00
For measuring with liquid pressure media, bleed before connecting tube. Protect from fire, sharp corners and hot objects. Test Point Microbore Flexible Hose. Test point hose and test point pressure gauge adaptor enable remote monitoring of hydraulic system pressure through pre-installed test point connectors Test point hose designed for connecting test point connector to test point adaptor or directly to a pressure gauge 5mm hose outside diameter ensures flexibility and ease of routing through hydraulic components or pipework while maintaining a high pressure rating Minimum bend radius 20mm Pressure/temperature factor 122% (to 0°C), 110% (at 30°C), 100% (at 50°C), 86% (at 80°C), 77% (at 100°C), 68% (at 120°C)
1 products found
JPY: 4,310
USD: 26.82
-
［Discontinued］Hydrotechnik Hydraulic Test Point Hose S110-AC-FB-01.00, Connection A M16, Connection B G 1/2 S110-AC-FB-01.00
For measuring with liquid pressure media, bleed before connecting tube. Protect from fire, sharp corners and hot objects. Test Point Microbore Flexible Hose. Test point hose and test point pressure gauge adaptor enable remote monitoring of hydraulic system pressure through pre-installed test point connectors Test point hose designed for connecting test point connector to test point adaptor or directly to a pressure gauge 5mm hose outside diameter ensures flexibility and ease of routing through hydraulic components or pipework while maintaining a high pressure rating Minimum bend radius 20mm Pressure/temperature factor 122% (to 0°C), 110% (at 30°C), 100% (at 50°C), 86% (at 80°C), 77% (at 100°C), 68% (at 120°C)
1 products found
JPY: 4,310
USD: 26.82
-
［Discontinued］Hydrotechnik Hydraulic Test Point Hose S110-AC-FB-02.00, Connection A M16, Connection B G 1/2 S110-AC-FB-02.00
For measuring with liquid pressure media, bleed before connecting tube. Protect from fire, sharp corners and hot objects. Test Point Microbore Flexible Hose. Test point hose and test point pressure gauge adaptor enable remote monitoring of hydraulic system pressure through pre-installed test point connectors Test point hose designed for connecting test point connector to test point adaptor or directly to a pressure gauge 5mm hose outside diameter ensures flexibility and ease of routing through hydraulic components or pipework while maintaining a high pressure rating Minimum bend radius 20mm Pressure/temperature factor 122% (to 0°C), 110% (at 30°C), 100% (at 50°C), 86% (at 80°C), 77% (at 100°C), 68% (at 120°C)
1 products found
JPY: 5,080
USD: 31.61
-
［Discontinued］Hydrotechnik Hydraulic Test Point 2103-04-16.00, M16 x 2 Male 2103-04-16.00
Hydraulic Test Point Bulk Connection. Can be positioned on central control panel Can be connected to remote test point to enable reading to be taken at control panel Male/male ends allow joining two test leads to form a longer lead Height 70mm
1 products found
JPY: 5,010
USD: 31.17
-
［Discontinued］Hydrotechnik Steel G 1/2 630 bar Pressure Gauge Adapter 2103-05-02.00
Test Point (Pressure Gauge) Adaptor. BSP to M16 adaptors that enables the connection of a pressure gauge to test hose Pressure gauge sealing is by inner cutting face sealing ring which is included
1 products found
JPY: 3,430
USD: 21.34
-
［Discontinued］Hydrotechnik Hydraulic Test Point 2103-01-46.00, NPT 1/8 Male 2103-01-46.00
Minimess 1620 Test Point. Enables quick and easy connection to pressure gauges or test hoses Fitted with metal protective cap and securing chain Compact design allows use in positions where space limited Manufactured in steel with zinc plated and yellow chromated surface finish or in stainless steel 1.4104 Seal material is Buna N (steel body), Viton (stainless steel body) Connecting thread M16 x 2
1 products found
JPY: 2,870
USD: 17.86
-
［Discontinued］Hydrotechnik Hydraulic Test Point 2103-01-47.00, NPT 1/4 Male 2103-01-47.00
Minimess 1620 Test Point. Enables quick and easy connection to pressure gauges or test hoses Fitted with metal protective cap and securing chain Compact design allows use in positions where space limited Manufactured in steel with zinc plated and yellow chromated surface finish or in stainless steel 1.4104 Seal material is Buna N (steel body), Viton (stainless steel body) Connecting thread M16 x 2
1 products found
JPY: 2,870
USD: 17.86
-
［Discontinued］Hydrotechnik Hydraulic Test Point 2103-01-21.00, UNF 7/16 Male 2103-01-21.00
Minimess 1620 Test Point. Enables quick and easy connection to pressure gauges or test hoses Fitted with metal protective cap and securing chain Compact design allows use in positions where space limited Manufactured in steel with zinc plated and yellow chromated surface finish or in stainless steel 1.4104 Seal material is Buna N (steel body), Viton (stainless steel body) Connecting thread M16 x 2
1 products found
JPY: 2,860
USD: 17.80
