[Siemens]Machine Guarding & Safety
Filters
- by Product group
- by Product
Sort by:
-
Siemens 3SK1 24 V ac/dc Safety Relay Single Channel With 4 Safety Contacts 3SK1111-1AB30
The 3SK1 safety relay can be used in Emergency Off / Emergency Stop devices in accordance with ISO 13850 and in safety circuits in accordance with VDE 0113-1 and/or DIN EN 60204-1. Depending on the external circuit, it is possible to achieve SILCL 3 in accordance with IEC 62061, SIL 3 in accordance with IEC 61508 and PL e (Cat. 4) in accordance with ISO 13849-1. SIRIUS 3SK1 Standard Safety Relay. The safety relays of the Standard series can be configured as stand alone devices or as an expandable solution with conventional wiring technology. The focus of the Standard series is on: single devices for simple safety applications, output side expansion by means of expansion units and external wiring. No expansion is possible on the input side. Applications. Emergency Off / Emergency Stop monitoring Monitoring of protective doors with electromechanical position switches, solid state position switches, or solenoid switches Monitoring of contact free protection equipment, e.g. light arrays / light barriers, or laser scanners. 3SK1111 Standard basic unit instantaneous (with relay outputs). The SIRIUS 3SK1111 is a two-channel safety relay for EMERGENCY OFF and EMERGENCY STOP equipment in accordance with EN 60204-1. The unit is equipped with a positively driven relay and monitors itself during every ON/OFF cycle. The safety relay has three enabling circuits (safety related circuits) as NO circuits and a signalling circuit (non-safety related circuit, NC contact). On the front of the 3SK1111 basic unit there is a slide switch for function setting and two LEDs for displaying the operating states. 2 sensor inputs (channels 1 and 2) 1 input for feedback circuit and START button 3 enabling circuits (safety related circuits, NO contacts) 1 signalling circuit (non-safety related circuit, NC contact) 2 LEDs for displaying the operating states Slide switch for function setting Single channel or two channel connection Cross circuit detection between sensor channels 1 and 2 Enclosure width 22.5 mm Removable terminals. 3SK1112 Standard basic unit instantaneous (with solid-state outputs). The SIRIUS 3SK1112 safety relay has two safety related solid state safe outputs and one non-safety related signalling circuit. On the front of the safety relay there is a 4-way DIP switch for function setting and 4 LEDs for status and function display. The SET / RESET button is used to load function settings and to restart the unit (reset). On commissioning, the 3SK1112 standard basic unit runs through a self test. This checks that the internal electronics and firmware are functioning correctly. All internal safety critical parts of the circuit are cyclically monitored for faults during operation. 4-way DIP switch for function setting (parameterization) SET / RESET button 4 LEDs for status and function display 2 sensor inputs (channels 1 and 2) 1 input (cascading circuit) 1 input (START pushbutton circuit) 1 input (feedback circuit) 2 test outputs 2 safe solid state outputs 1 solid state signalling circuit Enclosure width 22.5 mm Removable terminals
1 products found
JPY: 110,000
USD: 690.00
-
Sirius 3SE6 Magnetic Safety Switch, Plastic, 100 V ac 3SE6605-2BA
Coded magnet supplied separately, RS stock no ; 528-0879 528-0879. For a suitable safety relay use RS stock no. ; 528-0908 528-0908. 3SE6, Coded, Rectangular Non Contact Safety Switch. The SIRIUS 3SE6 non contact safety switches are designed for mounting on movable protective guards, e.g. hoods, flaps and doors. The enclosed design and high IP67 degree of protection, make these magnetically operated safety switches ideal for areas exposed to contamination, cleaning or disinfecting. Fits on movable protective guards such as hoods, flaps and doors Suitable for areas ex[posed to contamination, cleaning and disinfecting IP67 ingress protection Secure switching distance of 5mm ON and 15mm OFF
1 products found
JPY: 58,000
USD: 363.82
-
Sirius 3SE6 Magnetic Safety Switch, Plastic 3SE6605-3BA
Magnet supplied separately. 3SE6, Coded, Miniature. Magnet switches designed for mounting on movable protective guards such as covers, flaps and doors. Suitable for areas where cleaning, disinfecting or contamination is involved IP67 rated For a suitable safety relay, use ; 528-0908 528-0908 Effective operating distance 4-14mm For a suitable coded magnet, use stock no ; 528-0857 528-0857 Cable length of 3m
1 products found
JPY: 59,700
USD: 374.48
-
3SE7 Cable Switch, Straight, 25m, NO/NC 3SE7150-1BD00
The switches are equipped with positive latching and positive NC contacts and are therefore suitable for operation in EMERGENCY STOP devices in accordance with EN ISO 13850. They are usable up to Category 4 according to EN 954-1. UL,CSA. Stock nos. ; 764-4341 764-4341 , ; 764-4301 764-4301 , ; 764-4304 764-4304 , ; 764-4357 764-4357 are fitted with an indicator light. 3SE7 Emergency Grab Wire Switch. The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections. As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems. Design. The switches for wire lengths up to 50m are available with 1 NO + 1 NC or 2 NC contacts and for up to 75m with 1 NO + 3 NC contacts. The switches for wire lengths of 2 ;font face:"symbol">´ ;/font> 75m and the conveyor belt unbalance trackers are supplied with 2 NO + 2 NC contacts. The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m. Function. The NC contacts of the grab wire switch and the conveyor belt unbalance tracker are positive opening. The grab wire switches with one side operation are held in free position by the pre-tension on the turnbuckle. In the 3SE7 140 and 3SE7 150 grab wire switches, both switching contacts are available for wire-break/wire-pull signalling. The NO contact can be used, for example, for signalling purposes. On switches with interlocking, with a pre-tensioned wire, the locking must be deactivated beforehand in order to return the grab wire switch to its original position. Positive latching and positive NC contacts Switches for wire lengths up to 75m Metal housing Enclosure is screw mounted IP65 rating Operating temperature: -25 to +70°C
1 products found
JPY: 171,000
USD: 1,072.64
-
Siemens 3SE5000-0LA00 Contact Block, For Use With 3SE5 Limit Switch 3SE5000-0LA00
3SE5 Limit Switches, Modular Units. The SIRIUS 3SE5 limit switches provide the dependable performance required in everyday industrial applications thanks to their modular, consistent design and wide choice of variants and operating mechanisms. The standard design and function of the limit switches not only make it easy to select the right switch but also enable quick and easy installation, wiring and maintenance. The SIRIUS 3SE5 is designed for safety applications up to Category 4 according to ISO 13849-1 (EN 954-1) when you select the right product and use them properly in conjunction with fail-safe evaluation units such as the 3TK28, ASISafe, SIMATIC or SINUMERIK. Enclosure sizes. Open-type position switch IP20 (3SE5 250-*****) Plastic enclosures according to EN 50047, 31 mm wide, IP65, 1 cable entry (3SE5 232-***** ; 3SE5 234-*****) Plastic enclosures according to EN 50041, 40mm wide, IP66/IP67, 1 cable entry (3SE5 132-***** ; 3SE5 134-*****) Plastic enclosures, 50 mm wide, IP66/IP67, 2 cable entries (3SE5 242-*****) Metal enclosures according to EN 50047, 31 mm wide, IP66/IP67, 1 cable entry (3SE5 212-***** ; 3SE5 214-*****) Metal enclosures according to EN 50041, 40mm wide, IP66/IP67, 1 cable entry (3SE5 112-*****) Metal enclosures, 56 mm wide, IP66/IP67, 3 cable entries (3SE5 122-*****) XL metal enclosures with 4 to 6 contacts, 56 mm wide, IP66/IP67, 3 cable entries (3SE5 162-*****) Enclosures with an ambient temperature to -40°C (3SE5 ***-*****-1AJ0). Enclosure versions. With contact blocks with two or three contacts (screw terminals) designed as slow-action or snap-action contacts; the slow-action contacts also with make-before-break (refer to tech. data) Optional LED status display (3SE5 ***-1K*** ; 3SE5 ***-1L***) With M20 ;font face:"symbol">´ ;/font> 1.5 connection thread or mounted 4 or 5 pole M12 connector socket (refer to tech. data) Versions with increased corrosion protection (3SE5 ***-*****-1CA0) Versions for operating temperature up to -40°C (3SE5 ***-*****-1AJ0). Features. Easy replacement and mounting of actuator heads through plug mounting with uniform interface Integrated chlorinated rubber diaphragm (high functional safety in cold and aggressive environments) All actuator heads can be rotated in 22.5° increments Mounting time reductions of up to 25% through rapid connection system for plastic enclosures Versions with 3-pole contact blocks ensure increased safety through redundant disconnection and additional signalling while featuring the same enclosure dimensions as 2-pole contact blocks IP65/66/67 protection Switching points and mounting according to EN 50041 or EN 50047 Built in rounded plunger with 3mm over travel, (total travel 9mm) for greater tolerance when switching
1 products found
JPY: 15,200
USD: 95.35
-
Sirius 3SE6 Magnetic Safety Switch, Plastic, 100 V 3SE6604-2BA01
Coded magnet supplied separately, RS stock no ; 528-0879 528-0879. For a suitable safety relay use RS stock no. ; 528-0908 528-0908. 3SE6, Coded, Rectangular Non Contact Safety Switch. The SIRIUS 3SE6 non contact safety switches are designed for mounting on movable protective guards, e.g. hoods, flaps and doors. The enclosed design and high IP67 degree of protection, make these magnetically operated safety switches ideal for areas exposed to contamination, cleaning or disinfecting. Fits on movable protective guards such as hoods, flaps and doors Suitable for areas ex[posed to contamination, cleaning and disinfecting IP67 ingress protection Secure switching distance of 5mm ON and 15mm OFF
1 products found
JPY: 89,000
USD: 558.27
-
Sirius 3SE6 Magnetic Safety Switch, Plastic 3SE6604-2BA
Coded magnet supplied separately, RS stock no ; 528-0879 528-0879. For a suitable safety relay use RS stock no. ; 528-0908 528-0908. 3SE6, Coded, Rectangular Non Contact Safety Switch. The SIRIUS 3SE6 non contact safety switches are designed for mounting on movable protective guards, e.g. hoods, flaps and doors. The enclosed design and high IP67 degree of protection, make these magnetically operated safety switches ideal for areas exposed to contamination, cleaning or disinfecting. Fits on movable protective guards such as hoods, flaps and doors Suitable for areas ex[posed to contamination, cleaning and disinfecting IP67 ingress protection Secure switching distance of 5mm ON and 15mm OFF
1 products found
JPY: 70,800
USD: 444.11
-
Siemens 3SE7920-1AB Eye Bolt, For Use With 3SE7 Rope Pull Switch, 3SF2 Rope Pull Switch 3SE7920-1AB
The switches are equipped with positive latching and positive NC contacts and are therefore suitable for operation in EMERGENCY STOP devices in accordance with EN ISO 13850. They are usable up to Category 4 according to EN 954-1. UL,CSA. Stock nos. ; 764-4341 764-4341 , ; 764-4301 764-4301 , ; 764-4304 764-4304 , ; 764-4357 764-4357 are fitted with an indicator light. 3SE7 Emergency Grab Wire Switch. The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections. As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems. Design. The switches for wire lengths up to 50m are available with 1 NO + 1 NC or 2 NC contacts and for up to 75m with 1 NO + 3 NC contacts. The switches for wire lengths of 2 ;font face:"symbol">´ ;/font> 75m and the conveyor belt unbalance trackers are supplied with 2 NO + 2 NC contacts. The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m. Function. The NC contacts of the grab wire switch and the conveyor belt unbalance tracker are positive opening. The grab wire switches with one side operation are held in free position by the pre-tension on the turnbuckle. In the 3SE7 140 and 3SE7 150 grab wire switches, both switching contacts are available for wire-break/wire-pull signalling. The NO contact can be used, for example, for signalling purposes. On switches with interlocking, with a pre-tensioned wire, the locking must be deactivated beforehand in order to return the grab wire switch to its original position. Positive latching and positive NC contacts Switches for wire lengths up to 75m Metal housing Enclosure is screw mounted IP65 rating Operating temperature: -25 to +70°C
1 products found
JPY: 11,800
USD: 74.02
-
Siemens 3SE7950-1AB Turnbuckle, For Use With 3SE7 Rope Pull Switch, 3SF2 Rope Pull Switch 3SE7950-1AB
The switches are equipped with positive latching and positive NC contacts and are therefore suitable for operation in EMERGENCY STOP devices in accordance with EN ISO 13850. They are usable up to Category 4 according to EN 954-1. UL,CSA. Stock nos. ; 764-4341 764-4341 , ; 764-4301 764-4301 , ; 764-4304 764-4304 , ; 764-4357 764-4357 are fitted with an indicator light. 3SE7 Emergency Grab Wire Switch. The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections. As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems. Design. The switches for wire lengths up to 50m are available with 1 NO + 1 NC or 2 NC contacts and for up to 75m with 1 NO + 3 NC contacts. The switches for wire lengths of 2 ;font face:"symbol">´ ;/font> 75m and the conveyor belt unbalance trackers are supplied with 2 NO + 2 NC contacts. The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m. Function. The NC contacts of the grab wire switch and the conveyor belt unbalance tracker are positive opening. The grab wire switches with one side operation are held in free position by the pre-tension on the turnbuckle. In the 3SE7 140 and 3SE7 150 grab wire switches, both switching contacts are available for wire-break/wire-pull signalling. The NO contact can be used, for example, for signalling purposes. On switches with interlocking, with a pre-tensioned wire, the locking must be deactivated beforehand in order to return the grab wire switch to its original position. Positive latching and positive NC contacts Switches for wire lengths up to 75m Metal housing Enclosure is screw mounted IP65 rating Operating temperature: -25 to +70°C
1 products found
JPY: 17,700
USD: 111.03
-
3SE5 Solenoid Interlock Switch Power to Lock 24 V dc 3SE5312-0SB11
Actuators must be purchased separately. 3SE5 Series, Auxiliary Release. The SIRIUS 3SE5 solenoid interlock switch with separate actuator and additional electromagnetic tumbler is designed for protective doors that have to remain closed while a machine is being shut down. An integrated auxiliary magnet in the switch keeps the door locked until a specific signal has been received. A safety mechanism to prevent unwanted closing ensures that the NC contacts of the magnet never close even when the door is open. The switch can be released manually using an auxiliary release mechanism if, for example, access is required following a power failure or during installation. Some of the outstanding standard features include an integrated solenoid interlocking with 24 V, 115 V or 230 V coil voltage, 6 switching contacts and separate position sensing for the magnet and the protective door. Optical status monitoring is also available. Higher locking forces (2600 N on the metal version, 1300 N on the plastic versions) guarantee enhanced safety even in harsh industrial environments 2 x 3 contact blocks are included as standard, 2 NC contacts and 1 NO contact are provided for magnet and actuator monitoring The new, innovative ASIsafe solution with integrated module, which has been designed with safety in mind, greatly reduces the load on the data line: contact monitoring and magnet control draw on ≤170 mA A number of additional release mechanisms to handle any application: auxiliary release mechanism, lock release, escape release and emergency release Actuator heads can be rotated in 4 x 90° increments; 5 directions of approach (4 x lateral + 1 x front) LED status display IP66/67 protection Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061
1 products found
JPY: 166,000
USD: 1,041.28
-
SIRIUS 3SE2 Series Emergency Stop Foot Switch with Cover, 1 Pedal, Maintained Contacts, 2NO/2NC 3SE2924-3AA20
IEC 60947-5-1. The single pedal safety foot switch, stock no. ; 764-4073 764-4073 , locks on actuation according to EN ISO 13850. After eliminating the hazard, the machine can only be restarted after manually releasing the push button on the top of the enclosure. 3SE2 9 Safety Foot Switch. The 3SE2 9 safety foot switch is available in a metal enclosure for rugged applications or a plastic enclosure for less harsh environments. These foot switches can be supplied with one or two pedals and with or without a cover. Fixing holes for securing to the floor Latching or momentary-contact versions >10,000,000 operating cycles Temperature rating -25 to +80 °C
1 products found
JPY: 311,000
USD: 1,950.82
-
SIRIUS 3SE2 Series Emergency Stop Foot Switch without Cover, 1 Pedal, Momentary Contacts, NO/NC 3SE2902-0AB20
IEC 60947-5-1. The single pedal safety foot switch, stock no. ; 764-4073 764-4073 , locks on actuation according to EN ISO 13850. After eliminating the hazard, the machine can only be restarted after manually releasing the push button on the top of the enclosure. 3SE2 9 Safety Foot Switch. The 3SE2 9 safety foot switch is available in a metal enclosure for rugged applications or a plastic enclosure for less harsh environments. These foot switches can be supplied with one or two pedals and with or without a cover. Fixing holes for securing to the floor Latching or momentary-contact versions >10,000,000 operating cycles Temperature rating -25 to +80 °C
1 products found
JPY: 109,000
USD: 683.73
-
SIRIUS 3SE2 Series Emergency Stop Foot Switch without Cover, 1 Pedal, Momentary Contacts, 2NO/2NC 3SE2903-1AB20
IEC 60947-5-1. The single pedal safety foot switch, stock no. ; 764-4073 764-4073 , locks on actuation according to EN ISO 13850. After eliminating the hazard, the machine can only be restarted after manually releasing the push button on the top of the enclosure. 3SE2 9 Safety Foot Switch. The 3SE2 9 safety foot switch is available in a metal enclosure for rugged applications or a plastic enclosure for less harsh environments. These foot switches can be supplied with one or two pedals and with or without a cover. Fixing holes for securing to the floor Latching or momentary-contact versions >10,000,000 operating cycles Temperature rating -25 to +80 °C
1 products found
JPY: 123,000
USD: 771.55
-
SIRIUS 3SE2 Series Emergency Stop Foot Switch with Cover, 1 Pedal, Momentary Contacts, 2NO/2NC 3SE2903-1AA20
IEC 60947-5-1. The single pedal safety foot switch, stock no. ; 764-4073 764-4073 , locks on actuation according to EN ISO 13850. After eliminating the hazard, the machine can only be restarted after manually releasing the push button on the top of the enclosure. 3SE2 9 Safety Foot Switch. The 3SE2 9 safety foot switch is available in a metal enclosure for rugged applications or a plastic enclosure for less harsh environments. These foot switches can be supplied with one or two pedals and with or without a cover. Fixing holes for securing to the floor Latching or momentary-contact versions >10,000,000 operating cycles Temperature rating -25 to +80 °C
1 products found
JPY: 179,000
USD: 1,122.82
-
SIRIUS 3SE2 Series Emergency Stop Foot Switch with Cover, 1 Pedal, Momentary Contacts, NO/NC 3SE2902-0AA20
IEC 60947-5-1. The single pedal safety foot switch, stock no. ; 764-4073 764-4073 , locks on actuation according to EN ISO 13850. After eliminating the hazard, the machine can only be restarted after manually releasing the push button on the top of the enclosure. 3SE2 9 Safety Foot Switch. The 3SE2 9 safety foot switch is available in a metal enclosure for rugged applications or a plastic enclosure for less harsh environments. These foot switches can be supplied with one or two pedals and with or without a cover. Fixing holes for securing to the floor Latching or momentary-contact versions >10,000,000 operating cycles Temperature rating -25 to +80 °C
1 products found
JPY: 177,000
USD: 1,110.28
-
Siemens 3SE7921-1AC Rope Pulley, For Use With 3SE7 Rope Pull Switch, 3SF2 Rope Pull Switch 3SE7921-1AC
The switches are equipped with positive latching and positive NC contacts and are therefore suitable for operation in EMERGENCY STOP devices in accordance with EN ISO 13850. They are usable up to Category 4 according to EN 954-1. UL,CSA. Stock nos. ; 764-4341 764-4341 , ; 764-4301 764-4301 , ; 764-4304 764-4304 , ; 764-4357 764-4357 are fitted with an indicator light. 3SE7 Emergency Grab Wire Switch. The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections. As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems. Design. The switches for wire lengths up to 50m are available with 1 NO + 1 NC or 2 NC contacts and for up to 75m with 1 NO + 3 NC contacts. The switches for wire lengths of 2 ;font face:"symbol">´ ;/font> 75m and the conveyor belt unbalance trackers are supplied with 2 NO + 2 NC contacts. The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m. Function. The NC contacts of the grab wire switch and the conveyor belt unbalance tracker are positive opening. The grab wire switches with one side operation are held in free position by the pre-tension on the turnbuckle. In the 3SE7 140 and 3SE7 150 grab wire switches, both switching contacts are available for wire-break/wire-pull signalling. The NO contact can be used, for example, for signalling purposes. On switches with interlocking, with a pre-tensioned wire, the locking must be deactivated beforehand in order to return the grab wire switch to its original position. Positive latching and positive NC contacts Switches for wire lengths up to 75m Metal housing Enclosure is screw mounted IP65 rating Operating temperature: -25 to +70°C
1 products found
JPY: 19,200
USD: 120.44
-
Siemens 3SE5000-0AR01 Actuator Head, For Use With 3SE5 Limit Switch 3SE5000-0AR01
3SE5 Limit Switch Actuators. A range of actuator heads for use with the SIRIUS 3SE5 series limit switch. The actuator heads can be easily replaced thanks to their plug mounted design and uniform interface. Compatible with both the modular switch units and the complete switch units. Rounded plungers and roller plungers. Operation in direction of the plunger axis or with bar at right angles to the plunger axis Rounded plungers and roller plungers have an additional overtravel and hence a larger operating distance The roller plunger is recommended for lateral actuation and relatively long overtravel. Roller levers and angular roller levers. Depending on the direction of starting (left or right), various approach angles (α:30°) and trailing angles (γ:45°) are possible For actuators made of finely ground steel in the form of cams, straight-edges or cam disks. Twist levers and rod actuators. For a high starting speed (v:1.5 m/s) Variety of starting options Insensitive to oil, grinding dust, ice and coarse-grained material With the twist lever the maximum approach angle is always equal to the maximum trailing angle Rod actuator - when no actuator with approach and trailing angle is possible 10° adjustment of the twist lever possible. Spring rods. Can be used for undefined actuations and changing starting conditions Starting from any direction. Roller plungers for central fixing with M18 ;font face="symbol">´ ;/font> 1 thread. Fast assembly Easy adjustment. Fork levers. Switchable in two directions Latching actuator For reciprocating movements
1 products found
JPY: 15,700
USD: 98.48
-
Siemens SIRIUS ACT, Red, Key Reset 40mm Mushroom with Key Switch Head Emergency Button 3SU1000-1HF20-0AA0
Emergency Stop Push Button Heads, Plastic. Siemens extremely rugged IP69K 22 mm e-stop mushroom push button heads in high-grade plastic. Available in a variety of colours and reset methods. Self-holding function of the actuator when mounting Twist prevention integrated into patented holder design Stackable contact modules Suitable for use in extreme environments No special tools required Simple geometry for mounting holes
1 products found
JPY: 24,400
USD: 153.06
-
Siemens 3SE5000-0AA31 Actuator Head, For Use With 3SE5 Limit Switch 3SE5000-0AA31
3SE5 Limit Switch Actuators. A range of actuator heads for use with the SIRIUS 3SE5 series limit switch. The actuator heads can be easily replaced thanks to their plug mounted design and uniform interface. Compatible with both the modular switch units and the complete switch units. Rounded plungers and roller plungers. Operation in direction of the plunger axis or with bar at right angles to the plunger axis Rounded plungers and roller plungers have an additional overtravel and hence a larger operating distance The roller plunger is recommended for lateral actuation and relatively long overtravel. Roller levers and angular roller levers. Depending on the direction of starting (left or right), various approach angles (α:30°) and trailing angles (γ:45°) are possible For actuators made of finely ground steel in the form of cams, straight-edges or cam disks. Twist levers and rod actuators. For a high starting speed (v:1.5 m/s) Variety of starting options Insensitive to oil, grinding dust, ice and coarse-grained material With the twist lever the maximum approach angle is always equal to the maximum trailing angle Rod actuator - when no actuator with approach and trailing angle is possible 10° adjustment of the twist lever possible. Spring rods. Can be used for undefined actuations and changing starting conditions Starting from any direction. Roller plungers for central fixing with M18 ;font face="symbol">´ ;/font> 1 thread. Fast assembly Easy adjustment. Fork levers. Switchable in two directions Latching actuator For reciprocating movements
1 products found
JPY: 5,800
USD: 36.38
-
Siemens 3SE5000-0AU22 Actuator Head, For Use With 3SE5 Limit Switch 3SE5000-0AU22
Actuators are supplied, accessories are for spares. 3SE5 Hinge Switch. The SIRIUS 3SE5 Series hinge switch is designed for monitoring hinged doors and flaps. These mechanical position switches offer excellent protection from tampering thanks to the fixed, positive pivoting point connection between switch and door hinge. They have a standard enclosure according to EN 50047 and EN 50041 and a very small operating angle. Simultaneous shut down and signalling is provided in addition by the snap-action contacts. For the mechanical monitoring of protective doors or flaps Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061 Snap on contacts Simple, fast wiring offers approx 20 to 25% reduction in connection time Cable entry M20 x 1.5 Actuator head can be rotated in 22.5° increments
1 products found
JPY: 17,100
USD: 107.26
-
SIRIUS 3SE5 Safety Hinge Switch, 2NO/NC, M20 x 1.5 3SE5112-0LU22
Actuators are supplied, accessories are for spares. 3SE5 Hinge Switch. The SIRIUS 3SE5 Series hinge switch is designed for monitoring hinged doors and flaps. These mechanical position switches offer excellent protection from tampering thanks to the fixed, positive pivoting point connection between switch and door hinge. They have a standard enclosure according to EN 50047 and EN 50041 and a very small operating angle. Simultaneous shut down and signalling is provided in addition by the snap-action contacts. For the mechanical monitoring of protective doors or flaps Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061 Snap on contacts Simple, fast wiring offers approx 20 to 25% reduction in connection time Cable entry M20 x 1.5 Actuator head can be rotated in 22.5° increments
1 products found
JPY: 48,400
USD: 303.60
-
SIRIUS 3SE5 Safety Hinge Switch, NO/2NC, M20 x 1.5 3SE5232-0LU21
Actuators are supplied, accessories are for spares. 3SE5 Hinge Switch. The SIRIUS 3SE5 Series hinge switch is designed for monitoring hinged doors and flaps. These mechanical position switches offer excellent protection from tampering thanks to the fixed, positive pivoting point connection between switch and door hinge. They have a standard enclosure according to EN 50047 and EN 50041 and a very small operating angle. Simultaneous shut down and signalling is provided in addition by the snap-action contacts. For the mechanical monitoring of protective doors or flaps Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061 Snap on contacts Simple, fast wiring offers approx 20 to 25% reduction in connection time Cable entry M20 x 1.5 Actuator head can be rotated in 22.5° increments
1 products found
JPY: 34,400
USD: 215.78
-
SIRIUS 3SE5 Safety Hinge Switch, NO/2NC, M20 x 1.5 3SE5112-0LU21
Actuators are supplied, accessories are for spares. 3SE5 Hinge Switch. The SIRIUS 3SE5 Series hinge switch is designed for monitoring hinged doors and flaps. These mechanical position switches offer excellent protection from tampering thanks to the fixed, positive pivoting point connection between switch and door hinge. They have a standard enclosure according to EN 50047 and EN 50041 and a very small operating angle. Simultaneous shut down and signalling is provided in addition by the snap-action contacts. For the mechanical monitoring of protective doors or flaps Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061 Snap on contacts Simple, fast wiring offers approx 20 to 25% reduction in connection time Cable entry M20 x 1.5 Actuator head can be rotated in 22.5° increments
1 products found
JPY: 42,000
USD: 263.46
-
3SE5 Safety Interlock Switch, Plastic, 2NC 3SE5234-0QV40-1AE0
Actuators must be purchased separately. 3SE5 Series, Standard. The SIRIUS 3SE5 position switches are designed to ensure that the safety mechanism on protective doors cannot be deactivated. Also the multiple mechanical coding of these interlock switches virtually eliminates the possibility of tampering. The separate actuator is mounted directly on the protective door and moves into the opening on the switch when the door is closed. Once the door is opened, the actuator is removed from the switch and the NC contacts open breaking the circuit safely and reliably. 5 directions of approach, from above and 4 x 90° IP67 degree of protection Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061 Simple, fast wiring offers approx 20 to 25% reduction in connection time ASIsafe electronics are now integrated into the enclosure for additional space saving LED versions available for on-site diagnosis Slow action contacts Screw terminals
1 products found
JPY: 36,600
USD: 229.58
-
Siemens SIRIUS ACT, Red, Key Release 40mm Mushroom Head Emergency Button 3SU1050-1HR20-0AA0
Emergency Stop Push Button Heads, Metal (Shiny). Siemens extremely rugged IP69K 22 mm metal e-stop mushroom push button heads. Available in a variety of colours and reset methods. Self-holding function of the actuator when mounting Twist prevention integrated into patented holder design Stackable contact modules Suitable for use in extreme environments No special tools required Simple geometry for mounting holes
1 products found
JPY: 46,700
USD: 292.94
-
Siemens SIRIUS ACT, Red, Key Release 40mm Mushroom Head Emergency Button 3SU1050-1HF20-0AA0
Emergency Stop Push Button Heads, Metal (Shiny). Siemens extremely rugged IP69K 22 mm metal e-stop mushroom push button heads. Available in a variety of colours and reset methods. Self-holding function of the actuator when mounting Twist prevention integrated into patented holder design Stackable contact modules Suitable for use in extreme environments No special tools required Simple geometry for mounting holes
1 products found
JPY: 30,500
USD: 191.32
-
Siemens 3SX3228 Actuator, For Use With 3SE2 Switch 3SX3228
EN50041. Positioning switch without follower. Protection class IP67 Housing width - 3SE2 120: 40 mm; 3SE2 243: 52 mm
1 products found
JPY: 10,800
USD: 67.75
-
Siemens 3SX3218 Actuator, For Use With 3SE2 Switch 3SX3218
EN50041. Positioning switch without follower. Protection class IP67 Housing width - 3SE2 120: 40 mm; 3SE2 243: 52 mm
1 products found
JPY: 4,420
USD: 27.73
-
SIRIUS 3SE2 Safety Hinge Switch, NO/2NC, M20 x 1.5 3SE2283-0GA43
3SE2 283 Series. Simple, compact, IP65 door hinge safety switch Additional non-safety hinge available as an accessory Switching angle between 4°C and 13° Separate hinge available, stock no. 528-0778
1 products found
JPY: 110,000
USD: 690.00
-
SIRIUS 3SE2 Safety Hinge Switch, 3NC, M20 x 1.5 3SE2283-6GA43
3SE2 283 Series. Simple, compact, IP65 door hinge safety switch Additional non-safety hinge available as an accessory Switching angle between 4°C and 13° Separate hinge available, stock no. 528-0778
1 products found
JPY: 110,000
USD: 690.00
-
Siemens 3SX3225 Hinge, For Use With 3SE2 Switch 3SX3225
3SE2 283 Series. Simple, compact, IP65 door hinge safety switch Additional non-safety hinge available as an accessory Switching angle between 4°C and 13° Separate hinge available, stock no. 528-0778
1 products found
JPY: 24,300
USD: 152.43
-
Sirius 3SE6 Magnetic Safety Switch, Plastic, 100 V ac/dc 3SE6605-1BA
Magnet supplied separately. 3SE6, Coded, Round. Magnet switches designed for mounting on movable protective guards such as covers, flaps and doors. Suitable for areas where cleaning, disinfecting or contamination is involved IP67 rated For a suitable safety relay, use ; 528-0908 528-0908 Effective operating distance 5-15mm For a suitable coded magnet use stock no ; 528-0790 528-0790 Cable length of 3m
1 products found
JPY: 64,200
USD: 402.71
-
Siemens 3SE6704-1BA Actuator, For Use With 3SE6 Safety Switch 3SE6704-1BA
Magnet supplied separately. 3SE6, Coded, Round. Magnet switches designed for mounting on movable protective guards such as covers, flaps and doors. Suitable for areas where cleaning, disinfecting or contamination is involved IP67 rated For a suitable safety relay, use ; 528-0908 528-0908 Effective operating distance 5-15mm For a suitable coded magnet use stock no ; 528-0790 528-0790 Cable length of 3m
1 products found
JPY: 29,600
USD: 185.67
-
Siemens 3SE5000-0AA08 Actuator Head, For Use With 3SE5 Limit Switch 3SE5000-0AA08
3SE5 Limit Switch Actuators. A range of actuator heads for use with the SIRIUS 3SE5 series limit switch. The actuator heads can be easily replaced thanks to their plug mounted design and uniform interface. Compatible with both the modular switch units and the complete switch units. Rounded plungers and roller plungers. Operation in direction of the plunger axis or with bar at right angles to the plunger axis Rounded plungers and roller plungers have an additional overtravel and hence a larger operating distance The roller plunger is recommended for lateral actuation and relatively long overtravel. Roller levers and angular roller levers. Depending on the direction of starting (left or right), various approach angles (α:30°) and trailing angles (γ:45°) are possible For actuators made of finely ground steel in the form of cams, straight-edges or cam disks. Twist levers and rod actuators. For a high starting speed (v:1.5 m/s) Variety of starting options Insensitive to oil, grinding dust, ice and coarse-grained material With the twist lever the maximum approach angle is always equal to the maximum trailing angle Rod actuator - when no actuator with approach and trailing angle is possible 10° adjustment of the twist lever possible. Spring rods. Can be used for undefined actuations and changing starting conditions Starting from any direction. Roller plungers for central fixing with M18 ;font face="symbol">´ ;/font> 1 thread. Fast assembly Easy adjustment. Fork levers. Switchable in two directions Latching actuator For reciprocating movements
1 products found
JPY: 9,080
USD: 56.96
-
Siemens 3SE5000-0AE04 Actuator Head, For Use With 3SE5 Limit Switch 3SE5000-0AE04
3SE5 Limit Switch Actuators. A range of actuator heads for use with the SIRIUS 3SE5 series limit switch. The actuator heads can be easily replaced thanks to their plug mounted design and uniform interface. Compatible with both the modular switch units and the complete switch units. Rounded plungers and roller plungers. Operation in direction of the plunger axis or with bar at right angles to the plunger axis Rounded plungers and roller plungers have an additional overtravel and hence a larger operating distance The roller plunger is recommended for lateral actuation and relatively long overtravel. Roller levers and angular roller levers. Depending on the direction of starting (left or right), various approach angles (α:30°) and trailing angles (γ:45°) are possible For actuators made of finely ground steel in the form of cams, straight-edges or cam disks. Twist levers and rod actuators. For a high starting speed (v:1.5 m/s) Variety of starting options Insensitive to oil, grinding dust, ice and coarse-grained material With the twist lever the maximum approach angle is always equal to the maximum trailing angle Rod actuator - when no actuator with approach and trailing angle is possible 10° adjustment of the twist lever possible. Spring rods. Can be used for undefined actuations and changing starting conditions Starting from any direction. Roller plungers for central fixing with M18 ;font face="symbol">´ ;/font> 1 thread. Fast assembly Easy adjustment. Fork levers. Switchable in two directions Latching actuator For reciprocating movements
1 products found
JPY: 25,000
USD: 156.82
-
Siemens 3SE5000-0AR03 Actuator Head, For Use With 3SE5 Limit Switch 3SE5000-0AR03
3SE5 Limit Switch Actuators. A range of actuator heads for use with the SIRIUS 3SE5 series limit switch. The actuator heads can be easily replaced thanks to their plug mounted design and uniform interface. Compatible with both the modular switch units and the complete switch units. Rounded plungers and roller plungers. Operation in direction of the plunger axis or with bar at right angles to the plunger axis Rounded plungers and roller plungers have an additional overtravel and hence a larger operating distance The roller plunger is recommended for lateral actuation and relatively long overtravel. Roller levers and angular roller levers. Depending on the direction of starting (left or right), various approach angles (α:30°) and trailing angles (γ:45°) are possible For actuators made of finely ground steel in the form of cams, straight-edges or cam disks. Twist levers and rod actuators. For a high starting speed (v:1.5 m/s) Variety of starting options Insensitive to oil, grinding dust, ice and coarse-grained material With the twist lever the maximum approach angle is always equal to the maximum trailing angle Rod actuator - when no actuator with approach and trailing angle is possible 10° adjustment of the twist lever possible. Spring rods. Can be used for undefined actuations and changing starting conditions Starting from any direction. Roller plungers for central fixing with M18 ;font face="symbol">´ ;/font> 1 thread. Fast assembly Easy adjustment. Fork levers. Switchable in two directions Latching actuator For reciprocating movements
1 products found
JPY: 18,600
USD: 116.67
-
3SE5 Solenoid Interlock Switch Power to Unlock 230 V ac 3SE5312-0SD13
Actuators must be purchased separately. 3SE5 Series, Auxiliary Release. The SIRIUS 3SE5 solenoid interlock switch with separate actuator and additional electromagnetic tumbler is designed for protective doors that have to remain closed while a machine is being shut down. An integrated auxiliary magnet in the switch keeps the door locked until a specific signal has been received. A safety mechanism to prevent unwanted closing ensures that the NC contacts of the magnet never close even when the door is open. The switch can be released manually using an auxiliary release mechanism if, for example, access is required following a power failure or during installation. Some of the outstanding standard features include an integrated solenoid interlocking with 24 V, 115 V or 230 V coil voltage, 6 switching contacts and separate position sensing for the magnet and the protective door. Optical status monitoring is also available. Higher locking forces (2600 N on the metal version, 1300 N on the plastic versions) guarantee enhanced safety even in harsh industrial environments 2 x 3 contact blocks are included as standard, 2 NC contacts and 1 NO contact are provided for magnet and actuator monitoring The new, innovative ASIsafe solution with integrated module, which has been designed with safety in mind, greatly reduces the load on the data line: contact monitoring and magnet control draw on ≤170 mA A number of additional release mechanisms to handle any application: auxiliary release mechanism, lock release, escape release and emergency release Actuator heads can be rotated in 4 x 90° increments; 5 directions of approach (4 x lateral + 1 x front) LED status display IP66/67 protection Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061
1 products found
JPY: 159,000
USD: 997.37
-
3SE5 Solenoid Interlock Switch Power to Unlock 230 V ac 3SE5322-1SB21
Actuators must be purchased separately. 3SE5 Series, Auxiliary Release. The SIRIUS 3SE5 solenoid interlock switch with separate actuator and additional electromagnetic tumbler is designed for protective doors that have to remain closed while a machine is being shut down. An integrated auxiliary magnet in the switch keeps the door locked until a specific signal has been received. A safety mechanism to prevent unwanted closing ensures that the NC contacts of the magnet never close even when the door is open. The switch can be released manually using an auxiliary release mechanism if, for example, access is required following a power failure or during installation. Some of the outstanding standard features include an integrated solenoid interlocking with 24 V, 115 V or 230 V coil voltage, 6 switching contacts and separate position sensing for the magnet and the protective door. Optical status monitoring is also available. Higher locking forces (2600 N on the metal version, 1300 N on the plastic versions) guarantee enhanced safety even in harsh industrial environments 2 x 3 contact blocks are included as standard, 2 NC contacts and 1 NO contact are provided for magnet and actuator monitoring The new, innovative ASIsafe solution with integrated module, which has been designed with safety in mind, greatly reduces the load on the data line: contact monitoring and magnet control draw on ≤170 mA A number of additional release mechanisms to handle any application: auxiliary release mechanism, lock release, escape release and emergency release Actuator heads can be rotated in 4 x 90° increments; 5 directions of approach (4 x lateral + 1 x front) LED status display IP66/67 protection Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061
1 products found
JPY: 133,000
USD: 834.27
-
Siemens 3SE7920-1AC Eye Bolt, For Use With 3SE7 Rope Pull Switch, 3SF2 Rope Pull Switch 3SE7920-1AC
The switches are equipped with positive latching and positive NC contacts and are therefore suitable for operation in EMERGENCY STOP devices in accordance with EN ISO 13850. They are usable up to Category 4 according to EN 954-1. UL,CSA. Stock nos. ; 764-4341 764-4341 , ; 764-4301 764-4301 , ; 764-4304 764-4304 , ; 764-4357 764-4357 are fitted with an indicator light. 3SE7 Emergency Grab Wire Switch. The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections. As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems. Design. The switches for wire lengths up to 50m are available with 1 NO + 1 NC or 2 NC contacts and for up to 75m with 1 NO + 3 NC contacts. The switches for wire lengths of 2 ;font face="symbol">´ ;/font> 75m and the conveyor belt unbalance trackers are supplied with 2 NO + 2 NC contacts. The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m. Function. The NC contacts of the grab wire switch and the conveyor belt unbalance tracker are positive opening. The grab wire switches with one side operation are held in free position by the pre-tension on the turnbuckle. In the 3SE7 140 and 3SE7 150 grab wire switches, both switching contacts are available for wire-break/wire-pull signalling. The NO contact can be used, for example, for signalling purposes. On switches with interlocking, with a pre-tensioned wire, the locking must be deactivated beforehand in order to return the grab wire switch to its original position. Positive latching and positive NC contacts Switches for wire lengths up to 75m Metal housing Enclosure is screw mounted IP65 rating Operating temperature: -25 to +70°C
1 products found
JPY: 12,000
USD: 75.27
-
3SE5 Safety Interlock Switch, Metal, 2NC/1NO 3SE5122-1QV10
Actuators must be purchased separately. 3SE5 Series, Standard. The SIRIUS 3SE5 position switches are designed to ensure that the safety mechanism on protective doors cannot be deactivated. Also the multiple mechanical coding of these interlock switches virtually eliminates the possibility of tampering. The separate actuator is mounted directly on the protective door and moves into the opening on the switch when the door is closed. Once the door is opened, the actuator is removed from the switch and the NC contacts open breaking the circuit safely and reliably. 5 directions of approach, from above and 4 x 90° IP67 degree of protection Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061 Simple, fast wiring offers approx 20 to 25% reduction in connection time ASIsafe electronics are now integrated into the enclosure for additional space saving LED versions available for on-site diagnosis Slow action contacts Screw terminals
1 products found
JPY: 53,200
USD: 333.71
