[Siemens]Automation & Control Gear
-

PLCs, HMI & Data Acquisition[366]
-

Electric Motors, Motor Controllers & Peripherals[380]
-

Contactors[510]
-

Temperature Control & Process Heating[15]
-

Control Relays[112]
-

Circuit Protection & Circuit Breakers[131]
-

Machine Guarding & Safety[200]
-

Sensors & Transducers[20]
-

Industrial Switches[122]
-

Industrial Push Buttons, Pilot Lights & Control Stations[782]
-

Timers & Counters[73]
-

Fluid Control Systems[16]
-

Panel Meters & Components[196]
Filters
- by Product group
- by Product
Sort by:
-
Siemens 6ES7647 PLC I/O Module 5 Inputs, 9 Outputs 300 mA 28.8 V dc 6ES7647-0KA01-0AA2
IOT2000 Input/Output Module. The SIMATIC IOT2000 IO Arduino based shield module from Siemens enables local IO connectivity for IOT gateway. The IOT2000 IO module with its digital and analogue IO ‘s is designed to connecting directly local sensors and triggering uncritical processes. The IOT2000 Input/output module is rugged, designed for 24/7 operation in testing environments. Features ; Benefits. High industrial functionality ; design. Arduino shield with 5x DI, 2x DO and 2x AI. Fast assembly, as the suitable cover and fastening material are included in delivery. Use of the industry-standard voltage ranges. Tested environmental conditions, such as IOT2040 (e.g. for 0 - 50° C). CE and UL certification. Developed and tested for 24/7 operation. Highest degree of variability for creating applications. The module addressing via GPIOs allows the arbitrary selection of the programming language and development environment.
1 products found
JPY: 26,000
USD: 162.98
-
Siemens Sirius Innovation 690 V Motor Protection Circuit Breaker, 3P Channels, 2.2 → 3.2 A, 100 kA 3RV1011-1DA10
IEC947, VDE0990, EN60947. UL, CSA. This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the alternative highlighted by the manufacturer. Alternatively, refer to the cross reference list in the Technical Reference section which highlights the upgrade path for your current generation of products. Three-pole, Motor Protective Circuit Breakers – 3RV10 Range. The 3RV10 current limiting motor starter protector is commonly known as a motor protection switch, as they are used for switching and protecting induction motors. Seimens 3RV Manual Motor Starters are optimized for load feeders. The motor circuit breakers are compact and offer long term stability. Applications. Short-circuit protection For motor protection System protection Transformer protection Emergency Stop Switches Fuse Monitoring. Conditions. 3RV1 Motor Starter Protections are vulnerable to environmental factors such as dust and caustic vapours. As such, suitable enclosures are must be provided when operating in damp or dusty conditions. Features. Maximum rated current 100A (45kW @ 400V a.c.) Rated operational voltage: 690V Short-circuit proof to 50kA @ 400V a.c. Maximum switching frequency; 15 operations/hour Mechanical life; 10 ;sup>5 ;/sup> operations Ambient temperature range; –20 to +60 ° C Long term stability Manual reset Lockable in off position
1 products found
JPY: 67,800
USD: 425.00
-
Siemens Sirius Innovation 690 V Motor Protection Circuit Breaker, 3P Channels, 2.8 → 4 A, 100 kA 3RV1011-1EA10
IEC947, VDE0990, EN60947. UL, CSA. This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the alternative highlighted by the manufacturer. Alternatively, refer to the cross reference list in the Technical Reference section which highlights the upgrade path for your current generation of products. Three-pole, Motor Protective Circuit Breakers – 3RV10 Range. The 3RV10 current limiting motor starter protector is commonly known as a motor protection switch, as they are used for switching and protecting induction motors. Seimens 3RV Manual Motor Starters are optimized for load feeders. The motor circuit breakers are compact and offer long term stability. Applications. Short-circuit protection For motor protection System protection Transformer protection Emergency Stop Switches Fuse Monitoring. Conditions. 3RV1 Motor Starter Protections are vulnerable to environmental factors such as dust and caustic vapours. As such, suitable enclosures are must be provided when operating in damp or dusty conditions. Features. Maximum rated current 100A (45kW @ 400V a.c.) Rated operational voltage: 690V Short-circuit proof to 50kA @ 400V a.c. Maximum switching frequency; 15 operations/hour Mechanical life; 10 ;sup>5 ;/sup> operations Ambient temperature range; –20 to +60 ° C Long term stability Manual reset Lockable in off position
1 products found
JPY: 56,400
USD: 353.54
-
Siemens Sirius Classic 3RH1, NO (1), Auxiliary Contact, Snap-On 3RH1921-2CA10
Auxiliary Contacts - 3RH19 Range, Size 0. Size 0 Front Mount
1 products found
JPY: 2,500
USD: 15.67
-
Siemens Sirius Classic 3RH1, NO (1), Auxiliary Contact, Snap-On 3RH1921-1CA10
Auxiliary contactor blocks, screw connection. A range that fits both contactors and relays Snap-fit auxiliary contactor blocks for auxiliary contactors according to DIN EN 50 005
1 products found
JPY: 3,140
USD: 19.68
-
Siemens Sirius Classic 3RH1, NC (1), Auxiliary Contact, Snap-On 3RH1921-1CA01
Auxiliary contactor blocks, screw connection. A range that fits both contactors and relays Snap-fit auxiliary contactor blocks for auxiliary contactors according to DIN EN 50 005
1 products found
JPY: 2,890
USD: 18.12
-
Siemens Sirius Classic 3RH1, NC (1), Auxiliary Contact, Snap-On 3RH1921-2CA01
Auxiliary Contacts - 3RH19 Range, Size 0. Size 0 Front Mount
1 products found
JPY: 2,920
USD: 18.30
-
3 Pole Panel Mount Non Fused Isolator Switch, 16 A, 7.5 kW, IP65 3LD2003-0TK53
Sentron LD Disconnector. Main and emergency stop switch Handle available in black or red/yellow (emergency stop) Accepts 3 padlocks Front panel seal IP65 Side feed with cover Screw or DIN rail assembly
1 products found
JPY: 31,600
USD: 198.08
-
3 Pole Panel Mount Non Fused Isolator Switch, 32 A, 11.5 kW, IP65 3LD2203-0TK53
Sentron LD Disconnector. Main and emergency stop switch Handle available in black or red/yellow (emergency stop) Accepts 3 padlocks Front panel seal IP65 Side feed with cover Screw or DIN rail assembly
1 products found
JPY: 41,800
USD: 262.02
-
3 Pole Panel Mount Non Fused Isolator Switch, 16 A, 7.5 kW, IP65 3LD2003-0TK51
Sentron LD Disconnector. Main and emergency stop switch Handle available in black or red/yellow (emergency stop) Accepts 3 padlocks Front panel seal IP65 Side feed with cover Screw or DIN rail assembly
1 products found
JPY: 29,800
USD: 186.80
-
3 Pole Panel Mount Non Fused Isolator Switch, 32 A, 11.5 kW, IP65 3LD2203-0TK51
Sentron LD Disconnector. Main and emergency stop switch Handle available in black or red/yellow (emergency stop) Accepts 3 padlocks Front panel seal IP65 Side feed with cover Screw or DIN rail assembly
1 products found
JPY: 44,000
USD: 275.81
-
3 Pole Panel Mount Non Fused Isolator Switch, 63 A, 22 kW, IP65 3LD2504-0TK51
Sentron LD Disconnector. Main and emergency stop switch Handle available in black or red/yellow (emergency stop) Accepts 3 padlocks Front panel seal IP65 Side feed with cover Screw or DIN rail assembly
1 products found
JPY: 73,600
USD: 461.36
-
End Cap for use with 5ST3 7 MCB 5ST3750
DIN 57606, DIN 57659. Series 5ST3 7 Bus-Bar System. With pin connections Cut-to-length bar For 1 or 3-phase line protective switches of the series 5SJ6 and 5SY No additional connection terminal required for stranded connection up to 35mm² Excellent accessibility for feeder cable 50→90A load at infeed single-sided/in-centre for 10mm²; 65→120A for 16mm² Pin type connection Material: Cu (10mm²); 16mm² fully insulated Lug spacing: 18mm
1 products found
JPY: 630
USD: 3.95
-
Siemens Ethernet Switch 1 x RJ45 In, 4 x RJ45 out 6GK5005-0BA00-1AB2
CE, C-Tick. SCALANCE XB005 — Ethernet Switch. Unmanaged Industrial Ethernet Switch Installation of Ethernet networks in linear and star structure Electric local loop and mains connection Diagnosis at the device itself using LED Space-saving installation thanks to small, compact design DIN rail mounting Quick set-up without configuration
1 products found
JPY: 30,600
USD: 191.81
-
Siemens Sirius Innovation, NO/NC (2), Auxiliary Contact, Snap-On, 10 A 3RH2911-1DA11
Aux Contacts ; Contactor Accessories. Siemens auxiliary contacts and accessories for the Siemens contactors range.
1 products found
JPY: 9,130
USD: 57.23
-
Siemens 3 Pole Contactor, 7 A, 24 V dc Coil, SIRIUS Innovation, 3NO, 3 kW 3RT2015-1BB42
CE, UL, CSA, CCC. Screw terminals can only be used with screw terminal overloads and spring terminals can only be used with spring terminal overloads. Contactors – 3RT2 Range. The 3RT2 contactors are climate-proof and are suitable and tested for use worldwide, sizes S00 to S2, up to 37 kW. Size S00, up to 7.5 kW Size S0, up to 18.5 kW Size S2, up to 37 kW Screw connection / Spring Clamp Impulse voltage resistance 6 kV Insulation voltage 690 V Real loss power only 4 W Designation K according to DIN 40719 (extendable to IEC 204-2) ; IEC 750; Q according to DIN EN 61346-2
1 products found
JPY: 22,000
USD: 137.91
-
Siemens 3 Pole Contactor, 7 A, 24 V dc Coil, SIRIUS Innovation, 3NO, 3 kW 3RT2015-1BB41
CE, UL, CSA, CCC. Screw terminals can only be used with screw terminal overloads and spring terminals can only be used with spring terminal overloads. Contactors – 3RT2 Range. The 3RT2 contactors are climate-proof and are suitable and tested for use worldwide, sizes S00 to S2, up to 37 kW. Size S00, up to 7.5 kW Size S0, up to 18.5 kW Size S2, up to 37 kW Screw connection / Spring Clamp Impulse voltage resistance 6 kV Insulation voltage 690 V Real loss power only 4 W Designation K according to DIN 40719 (extendable to IEC 204-2) ; IEC 750; Q according to DIN EN 61346-2
1 products found
JPY: 17,000
USD: 106.56
-
Siemens 3 Pole Contactor, 12 A, 24 V dc Coil, SIRIUS Innovation, 3NO, 5.5 kW 3RT2017-1BB41
CE, UL, CSA, CCC. Screw terminals can only be used with screw terminal overloads and spring terminals can only be used with spring terminal overloads. Contactors – 3RT2 Range. The 3RT2 contactors are climate-proof and are suitable and tested for use worldwide, sizes S00 to S2, up to 37 kW. Size S00, up to 7.5 kW Size S0, up to 18.5 kW Size S2, up to 37 kW Screw connection / Spring Clamp Impulse voltage resistance 6 kV Insulation voltage 690 V Real loss power only 4 W Designation K according to DIN 40719 (extendable to IEC 204-2) ; IEC 750; Q according to DIN EN 61346-2
1 products found
JPY: 29,400
USD: 184.29
-
Siemens 3 Pole Contactor, 12 A, 24 V dc Coil, SIRIUS Innovation, 3NO, 5.5 kW 3RT2024-1BB40
CE, UL, CSA, CCC. Screw terminals can only be used with screw terminal overloads and spring terminals can only be used with spring terminal overloads. Contactors – 3RT2 Range. The 3RT2 contactors are climate-proof and are suitable and tested for use worldwide, sizes S00 to S2, up to 37 kW. Size S00, up to 7.5 kW Size S0, up to 18.5 kW Size S2, up to 37 kW Screw connection / Spring Clamp Impulse voltage resistance 6 kV Insulation voltage 690 V Real loss power only 4 W Designation K according to DIN 40719 (extendable to IEC 204-2) ; IEC 750; Q according to DIN EN 61346-2
1 products found
JPY: 46,100
USD: 288.97
-
Siemens 3 Pole Contactor, 16 A, 24 V dc Coil, SIRIUS Innovation, 3NO, 7.5 kW 3RT2025-1BB40
CE, UL, CSA, CCC. Screw terminals can only be used with screw terminal overloads and spring terminals can only be used with spring terminal overloads. Contactors – 3RT2 Range. The 3RT2 contactors are climate-proof and are suitable and tested for use worldwide, sizes S00 to S2, up to 37 kW. Size S00, up to 7.5 kW Size S0, up to 18.5 kW Size S2, up to 37 kW Screw connection / Spring Clamp Impulse voltage resistance 6 kV Insulation voltage 690 V Real loss power only 4 W Designation K according to DIN 40719 (extendable to IEC 204-2) ; IEC 750; Q according to DIN EN 61346-2
1 products found
JPY: 43,000
USD: 269.54
-
Siemens Sirius Innovation 690 V Motor Protection Circuit Breaker, 3P Channels, 0.35 → 0.5 A, 100 kA 3RV2011-0FA10
Motor Circuit Breakers 3RV20. Circuit-breaker for motor protection Screw connection/ Sping clamp Class 10 Impulse voltage resistance 6 kV Insulation voltage 690V Real loss power only 6/7W Standard switching capacity Approvals: CE / UL / CSA
1 products found
JPY: 44,700
USD: 280.20
-
Siemens Sirius Innovation 690 V Motor Protection Circuit Breaker, 3P Channels, 1.1 → 1.6 A, 100 kA 3RV2011-1AA20
Motor Circuit Breakers 3RV20. Circuit-breaker for motor protection Screw connection/ Sping clamp Class 10 Impulse voltage resistance 6 kV Insulation voltage 690V Real loss power only 6/7W Standard switching capacity Approvals: CE / UL / CSA
1 products found
JPY: 52,000
USD: 325.96
-
Siemens Sirius Innovation 690 V Motor Protection Circuit Breaker, 3P Channels, 11 → 16 A, 4 kA 3RV2011-4AA10
Motor Circuit Breakers 3RV20. Circuit-breaker for motor protection Screw connection/ Sping clamp Class 10 Impulse voltage resistance 6 kV Insulation voltage 690V Real loss power only 6/7W Standard switching capacity Approvals: CE / UL / CSA
1 products found
JPY: 61,700
USD: 386.76
-
Siemens Sirius Innovation 3RV2, NO/NC (2), Auxiliary Contact, Plug In, 1 A dc, 2.5 A ac 3RV2901-1E
Circuit Protection Accessories
1 products found
JPY: 7,390
USD: 46.32
-
Siemens Contactor Relay 3NO/1NC, 10 A 3RH2131-1BB40
IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1. The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms). Contactor Relays - 3RH2 Range. Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil. Size S00 High degree if contact stability at low voltages ; current Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks
1 products found
JPY: 27,600
USD: 173.01
-
Siemens 38 A Soft Starter 3RW30 Series, IP20, 18.5 kW 3RW3028-1BB04
Connection System - Screw Terminal: 1CB54; Cable Clamp: 2CB54. Miniature Soft Starter. Compact design - width of 22.5mm One device for entire control voltage range, from UC 24V to 230V Optimal adjustment capability using only 3 potentiometers, start time, starting voltage ; stopping time, all of which can be set individually Operating status display (Ready/Run) via two LED's
1 products found
JPY: 125,000
USD: 783.55
-
Siemens 3SK1 24 V ac/dc Safety Relay Single Channel With 4 Safety Contacts 3SK1111-1AB30
The 3SK1 safety relay can be used in Emergency Off / Emergency Stop devices in accordance with ISO 13850 and in safety circuits in accordance with VDE 0113-1 and/or DIN EN 60204-1. Depending on the external circuit, it is possible to achieve SILCL 3 in accordance with IEC 62061, SIL 3 in accordance with IEC 61508 and PL e (Cat. 4) in accordance with ISO 13849-1. SIRIUS 3SK1 Standard Safety Relay. The safety relays of the Standard series can be configured as stand alone devices or as an expandable solution with conventional wiring technology. The focus of the Standard series is on: single devices for simple safety applications, output side expansion by means of expansion units and external wiring. No expansion is possible on the input side. Applications. Emergency Off / Emergency Stop monitoring Monitoring of protective doors with electromechanical position switches, solid state position switches, or solenoid switches Monitoring of contact free protection equipment, e.g. light arrays / light barriers, or laser scanners. 3SK1111 Standard basic unit instantaneous (with relay outputs). The SIRIUS 3SK1111 is a two-channel safety relay for EMERGENCY OFF and EMERGENCY STOP equipment in accordance with EN 60204-1. The unit is equipped with a positively driven relay and monitors itself during every ON/OFF cycle. The safety relay has three enabling circuits (safety related circuits) as NO circuits and a signalling circuit (non-safety related circuit, NC contact). On the front of the 3SK1111 basic unit there is a slide switch for function setting and two LEDs for displaying the operating states. 2 sensor inputs (channels 1 and 2) 1 input for feedback circuit and START button 3 enabling circuits (safety related circuits, NO contacts) 1 signalling circuit (non-safety related circuit, NC contact) 2 LEDs for displaying the operating states Slide switch for function setting Single channel or two channel connection Cross circuit detection between sensor channels 1 and 2 Enclosure width 22.5 mm Removable terminals. 3SK1112 Standard basic unit instantaneous (with solid-state outputs). The SIRIUS 3SK1112 safety relay has two safety related solid state safe outputs and one non-safety related signalling circuit. On the front of the safety relay there is a 4-way DIP switch for function setting and 4 LEDs for status and function display. The SET / RESET button is used to load function settings and to restart the unit (reset). On commissioning, the 3SK1112 standard basic unit runs through a self test. This checks that the internal electronics and firmware are functioning correctly. All internal safety critical parts of the circuit are cyclically monitored for faults during operation. 4-way DIP switch for function setting (parameterization) SET / RESET button 4 LEDs for status and function display 2 sensor inputs (channels 1 and 2) 1 input (cascading circuit) 1 input (START pushbutton circuit) 1 input (feedback circuit) 2 test outputs 2 safe solid state outputs 1 solid state signalling circuit Enclosure width 22.5 mm Removable terminals
1 products found
JPY: 107,000
USD: 670.72
-
Siemens Adapter for use with SIMATIC S7 6GK1571-0BA00-0AA0
S7-300 PC Adapter. PC Adapter USB (USB V2.0) For connecting a PG/PC or notebook to SIMATIC S7 via PROFIBUS or MPI USB cable (5m) included
1 products found
JPY: 284,000
USD: 1,780.23
-
Siemens PLC Programming Software V8 for use with LOGO! 8 Series for Kernel 3.0.76, Mac OS X 10.6 Snow Leopard, Mac OS X 6ED1058-0BA08-0YA1
LOGO! 8 - Soft Comfort V8 Programming Software. LOGO!8 is the latest generation of intelligent Logic Modules from Siemens, offering a refined upgrade from the previous generation. Improvements include simplified handling, new optical indicating display and full communication functions via Ethernet across the full range of Logic Modules. Another added benefit of the LOGO!8 is that all Logic Modules come equipped with an integrated Web Server with "Drag ; Drop" programming, no HTML coding knowledge required. LOGO! Soft Comfort V8 is the latest instalment in the series, and has stood true to the ethos of extremely simple and fast configuration. Just like previous versions project creation ; simulation along with documentation are still as easy to navigate thanks to the "Drag ; Drop" build of the user interface. Up to 43 function blocks are supplied as standard, providing unrivaled programming flexibility coupled with an intuitive user interface. Smooth and simple program migration from previous versions
1 products found
JPY: 24,900
USD: 156.08
-
Siemens S7-1200 PLC CPU, Ethernet Networking Profinet Interface, 100 kB Program Capacity, 14 (Digital Input, 2 switch 6ES7215-1AG40-0XB0
S7-1200 - CPU 1215C. The SIMATIC S7-1200 system comes in five different models, CPU 1211C, CPU 1212C, CPU 1214C, 1215C and 1217C, that may each be expanded to exactly fit your machine requirements. Function board can be added inside the front of any CPU to easily expand the digital or analog I/Os without affecting the physical size of the controller. SIMATIC S7-1200 CPU 1215C Series Compact high-performance CPU With 24 integrated inputs and outputs 2 Profinet ports Basic PID Controller Integrated real-time clock Removable terminals on all modules 4 Alarm Inputs. Expandable with:. 1 signal board (SB) or 1 communication board (CB) 8 signal modules (SM) Max. 3 communication modules (CM)
1 products found
JPY: 258,000
USD: 1,617.25
-
Siemens TP700 Series Touch Screen HMI 7 in TFT 800 x 480pixels 6AV2124-0GC01-0AX0
SIMATIC HMI TP Comfort Series. The SIMATIC TP comfort series from Siemens comes in a variety of wide-screen displays ranging from 7" to 22" with touch screen operation. All SIMATIC comfort panels are IP65 rated for harsh conditions and are flexible for any outdoor application. These innovative HMI's are capable of coordinating and centrally shutting down their displays via PROFIenergy during break times, in order to reduce energy consumption, in comparison to previous SIMATIC panels. Wide-screen high-resolution displays from 7" to 22" Graphical user interface for intuitive machine operation and monitoring Device functionality offers archives, VB scripts and various viewers for display of plant documentation and internet websites Vertical installation for optimum plant space utilization Maximum data security Integrated system diagnostics Can be configured using WINCC Comfort
1 products found
JPY: 544,000
USD: 3,410.02
-
Siemens KTP 700 Series Touch Screen HMI 7 in TFT 800 x 480pixels 6AV2123-2GA03-0AX0
The Ethernet cable and MPI adaptor are only supplied in certain cases- Ethernet cable (only for PN screens) MPI cable (only for DP devices) for downloading and test purposes. However, these are not supplied and must be purchased separately. SIMATIC HMI KTP 400 / 600 / 700/ 1000 / TP1500 series. This range offers panels with 4, 6, 7 and 10-inch displays, keypad or touch controls, and is delivered with a 15-inch basic panel touch screen. Every SIMATIC Basic Panel is designed with the IP65 protection class and is ideal for simple visualization tasks, even in harsh environments. Additional advantages include integrated software functions such as a reporting system, recipe management, or graph functions. These high-resolution screens display 64k colours and can work both in vertical and horizontal mode. The USB interface allows for connecting of keyboard, mouse or barcode scanner. It can also be used for transferring data. Screens are especially energy-efficient due to their 100% dimmable brightness. Visualization allows for considerably increased process quality with compact plants or smaller applications. Featuring all important HMI basic functions, SIMATIC HMI Basic Panels 2nd Generation thus opens up completely new possibilities in terms of operation and monitoring also in the field of mechanical engineering. Basic Panels 2nd Generation offer proven SIMATIC quality and, regardless of display size, numerous software functions as standard – for example, alarm logging, recipe management, trend functions and language switching. Features and Benefits:. The ideal entry-level series for operating and monitoring simple machines and plants Clear process representation thanks to the use of pixel-graphics displays Intuitive operation using Touch and tactile function keys Engineered in the TIA Portal Mounting compatibility with SIMATIC HMI Comfort Panels and existing SIMATIC HMI Basic Panels 4 and 6 Flexible scalability within the HMI range High-resolution, dimmable wide-screen displays with 64.000 colours Innovative user interface and improved usability thanks to new controls and graphics Touch/key functionality for intuitive operation Interface for connection with various PLCs Versions for PROFIBUS or PROFINET Archiving via USB stick Equipped with all the necessary basic functions such as alarm logging, recipe management, plots, vector graphics, and language switching Can be configured by using WinCC flexible Compact or alternatively the HMI configuration software of the STEP7 Basic Engineering Software for S7-1200 Simple connection to the controller via integral Ethernet interface or a separate version with RS485/422. All devices of the SIMATIC HMI Basic Panel family are characterized by the same set of basic functions regardless of the chosen size of the device. For technical specification list below.
1 products found
JPY: 301,000
USD: 1,886.79
-
Siemens Insulation Sleeve for use with 3SB2 Series 3SB2908-8AB
CE. 3SB2 - Accessories. Switching element. N/O or N/C contact For inserting the holder or lamp holder. The 3SB2 range from Siemens offers various accessories to accompany the pilot devices including, Incandescent lamps, fixing collars and holders for contact blocks. 24 V / 1 W With wedge base W 2 x 4.6 d. Plug connector. Push-on terminal for male tab 2.8 x 0.8 mm Insulating sleeve for male tab, may be pushed on from the front. Backing plate. Yellow, 50 mm Self adhesive Without label or With "EMERGENCY STOP" label. Tool. Removal tool for holder and lamp holder with holder Lamp gripper for lamps with W2 x 4,6 d base
1 products found
JPY: 45,000
USD: 282.08
-
PT100 Temperature Transmitter, 8.5 → 36 V dc, -40 → +85 °C 7NG3211-0NN00
1 products found
JPY: 30,100
USD: 188.68
-
Siemens DIN Rail Adapter for use with Head Transmitter 7NG3092-8KA
1 products found
JPY: 25,900
USD: 162.35
-
Siemens Plug In Optional Module 6DR2803-8C
Electrical controller
SIPART DR19 for applications in machine and instrument manufacturing SIPART DR2 for all standard tasks, with comprehensive display Controller can be expanded with accessory modules Cable for PC connection1 products found
JPY: 129,000
USD: 808.63
-
Siemens PLC Expansion Module Input/Output 6DR2803-8P
Electrical controller
SIPART DR19 for applications in machine and instrument manufacturing SIPART DR2 for all standard tasks, with comprehensive display Controller can be expanded with accessory modules Cable for PC connection1 products found
JPY: 179,000
USD: 1,122.05
-
Siemens Plug In Optional Module 6DR2805-8A
Electrical controller
SIPART DR19 for applications in machine and instrument manufacturing SIPART DR2 for all standard tasks, with comprehensive display Controller can be expanded with accessory modules Cable for PC connection1 products found
JPY: 18,100
USD: 113.46
-
Siemens Relay Output 6DR2804-8B
Electrical controller
SIPART DR19 for applications in machine and instrument manufacturing SIPART DR2 for all standard tasks, with comprehensive display Controller can be expanded with accessory modules Cable for PC connection1 products found
JPY: 92,300
USD: 578.58
-
Siemens Input Card 6DR2800-8V
Electrical controller
SIPART DR19 for applications in machine and instrument manufacturing SIPART DR2 for all standard tasks, with comprehensive display Controller can be expanded with accessory modules Cable for PC connection1 products found
JPY: 145,000
USD: 908.92
