TP GIKEN

Test Piece Wood Plate Lauan Plywood 100 Pieces and others

TP GIKEN

Test Piece Rubber Sheet natural rubber 50 Pieces and others

TP GIKEN

Grooved Container for Test Piece Slamp Test Strip, 10 Pieces　

TP GIKEN

Test Piece Mortar 100 Pieces　

TP GIKEN

Test Piece Glass 100 Pieces　

TP GIKEN

Test Piece Colonial 50 Pieces　

TP GIKEN

Test Piece Calcium Condensate, 50 Pieces　

TP GIKEN

Test Piece Cationic Electrodeposition Coating 50 Pieces　

TP GIKEN

Test Piece Color Steel 50 Pieces　

TP GIKEN

Test Piece Galvanized Steel, 50 Pieces　

TP GIKEN

Test Piece Galvanium Steel Plate, 50 Pieces　

TP GIKEN

Test Piece Asphalt Felt, 430, 50 Pieces　

TP GIKEN

Test Piece Tin Plate with 300 pieces　

TP GIKEN

Sag Tester (Drooping Tester) BOX Type JIS Standard 140 x 40 x 30mm and others

TP GIKEN

Multi Applicator (Coating Width Of 50mm) and others

TP GIKEN

Pigment Dispersion Comparison Tester 500 x 420 x 650mm　TP-035

This machine has been developed as a dispersion comparison test machine that is closest to the dispersion principle of Eyeliter sand grind mill.
Pigments, vehicles, and glass beads are prepared in a glass tube, tightly stoppered, and loaded into the unit. When horizontal motion is applied in the longitudinal direction of the tube, the dispersion effect is exerted by the movement and vibration of the glass bead.

TP GIKEN

Taber'S Abrasion Resistance Tester 515 x 310 x 360mm　TP-152

This machine is used to measure the degree of wear of surface treatment materials such as coating and plating, plastics, rubber, decorative plywood, fibers, and other materials.

TP GIKEN

Washing Tester (2 Racks) 480 x 650 x 720mm　TP-153

It is an excellent testing machine that performs cleaning resistance tests on paint coatings, plastics, floor materials, and other materials and is manufactured in accordance with JIS standards and the Gardner system.
The specimen surface is reciprocated at constant speed by the prescribed brush to observe the condition of feeding the specimen.

TP GIKEN

Film Friction Testing Machine 400 x 350 x 600mm　TP-154

This machine measures the friction durability of marker pens for metal coatings and stationery by rubbing them with gauze, felt, sand eraser, etc.

TP GIKEN

Erichsen Testing Machine 240 x 480 x 300mm　TP-180

This unit measures the coating strength of a painted surface.
The specimen set in the specimen holder is fastened and fixed with a die, and the punch is extruded from the back of the film surface.

TP GIKEN

Suction Plate 160 x 260 x 50mm　TP-201

When the applicator, sag tester, etc., is used to create a constant thickness coating film, the purpose of this system is to create a constant coating film by sucking and adhering the test specimen onto the plate (float glass) to maintain smooth contact.

TP GIKEN

Automatic Film Applicator (Type Also Used As Bar Coater) 940 x 540 x 300mm　TP-202

This is a test machine that performs optimum coating tests on sheets of paper, metal, film, etc., by setting the coating speed with an applicator or bar coater.

TP GIKEN

JIS Type No Pickup Time Tester 450 x 400 x 400mm　TP-250

This machine measures the drying time of traffic paint. It rolls the machine on the painted surface at a constant speed (passing through the paint film for 1 second) and checks whether the paint film has adhered to the tire of the test roll.
Use the traffic applicator to create a 150 mm wide coating film. Test the film 15 minutes after 1 type, 10 minutes after 2 types, and 3 types after 3 minutes to check for adhesion and reference the no-pickup time.

TP GIKEN

Pencil Scratch Test Machine (Manual Type) 150 (130) x 80 x 65mm　TP-260

This is a manual pencil scratching tester manufactured in accordance with JIS K-5600 and equipped with the function of a pencil scratching tester.
The hardness and adhesion strength of the coating film are measured by the hardness of the pencil that scratches when the paint or varnish is scratched with a pencil held at a load of 750 g and an angle of 45 degrees.

TP GIKEN

Dry-Through Endurance Tester　TP-261

It is used for a pass/fail test to determine whether a single coating or multilayer coating system of a paint or related product has reached a cured dry state after a specified drying time has elapsed.
It can also be used to measure the time it takes to reach the cured dry state.

TP GIKEN

Ford Cup Stainless Steel 200 x 180 x 280mm　TP-304

This device fills a cup with a sample of paint, varnish, etc., and measures the viscosity easily and quickly by grinding the surface tension with the attached glass plate and the flow time from a fixed orifice.

TP GIKEN

ISO Flow Cup Orifice Diameter 3mm 108mL and others

TP GIKEN

Zahn-Viscosity Cup No1 Orifice Diameter 2.0mm and others

TP GIKEN

Stormer Viscometer 210 x 210 x 415mm　TP-330

Viscosity of paint in a 500 ml sample can is measured in seconds of 100 revolutions by the resistance value of the accurately finished rotor blade.
This is a test machine that measures the time and calculates the KU value by determining the head so that the rotor rotates 100 times in about 30 seconds.

TP GIKEN

Specific Gravity Cup 50mL 45φ x 45mm and others

TP GIKEN

JIS Moisture-Permeable Cup 410 x 250 x 200mm　TP-415

This unit is used to measure the moisture permeability of plastic paper, tarpaulin paper, and other packaging materials.

TP GIKEN

Flex Testing Machine Cylindrical Mandrel Method and others

TP GIKEN

［Discontinued］RC Type Coating Film Drying Time Measuring Instrument Type I (Drying Recorder) 240 x 500 x 110mm and others