FUJIGEN KOGYO Co., Ltd.

Tibirsko Blade diameter: Φ1.2-Φ9.7 tip angle: 90 Shank Diameter: 10 and others

FUJIGEN KOGYO Co., Ltd.

Unhulled Eco Blade diameter: Φ1.2-Φ13.6 tip angle: 90 Shank Diameter: 12 and others

FUJIGEN KOGYO Co., Ltd.

Eco Men Blade diameter: Φ1.2-Φ21.6 tip angle: 90 Shank Diameter: 20 and others

FUJIGEN KOGYO Co., Ltd.

Chwimmi tip angle: 90 Length: 105 Shank Diameter: 10 and others

FUJIGEN KOGYO Co., Ltd.

Unhulled Men tip angle: 90 Length: 110 Shank Diameter: 16 and others

FUJIGEN KOGYO Co., Ltd.

Big fir tip angle: 90 Length: 130 Shank Diameter: 20 and others

FUJIGEN KOGYO Co., Ltd.

Tibirsko 2 Shank Diameter: 16 Maximum chamfer diameter: Φ18.0 and others

FUJIGEN KOGYO Co., Ltd.

Unhulled Eco 2 Shank Diameter: 20 Maximum chamfer diameter: Φ24.7 and others

FUJIGEN KOGYO Co., Ltd.

Eco Men 2 Shank Diameter: 32 Maximum chamfer diameter: Φ36.3 and others

FUJIGEN KOGYO Co., Ltd.

Buytender Set (body, Arm) and others

FUJIGEN KOGYO Co., Ltd.

Young Men tip angle: 30 Shank Diameter: 32 and others

FUJIGEN KOGYO Co., Ltd.

Drilling Machine for chamfer displacement Ruby tip angle: 45 Shank Diameter: 10 and others

FUJIGEN KOGYO Co., Ltd.

Marchangelmir tip angle: 0 to 90 Shank Diameter: 32 and others

FUJIGEN KOGYO Co., Ltd.

R Special Jr. shank Φ25　NK25-05R

Chip replaceable and R chamfering up to 0.5~5R is possible.
Carbide chips that can be used on 4 sides with 1 chip, and the life is more than 5 times longer than Hiss.

FUJIGEN KOGYO Co., Ltd.

Ryan Men sheet R tip angle: 45 Shank Diameter: 16 and others

FUJIGEN KOGYO Co., Ltd.

Mini R tip angle: 45 Shank Diameter: 20　MR20-16S

R chamfer and C chamfer can be performed by replacing the chip.
It uses a chip that can be used for 8 corners.

FUJIGEN KOGYO Co., Ltd.

Clamp Screw Length: 4.8mm M2.5 right and others

FUJIGEN KOGYO Co., Ltd.

Lock pin Length 20mm M6 Right and others

FUJIGEN KOGYO Co., Ltd.

Spanner Length 90mm　NL-4

Used to attach clamp screws and lock pins to chamfer cutter tips.

FUJIGEN KOGYO Co., Ltd.

Face for Processing S Type Precision class Tips diamond　S32GURDIA

Face milling, chamfering.

FUJIGEN KOGYO Co., Ltd.

Drilling Machine for chamfer displacement Ruby 30 ° Φ29 and others

FUJIGEN KOGYO Co., Ltd.

Chamfer Cutter 45 ° shank Φ32　NK4530T

The problem of secondary scratching in various work materials was also cleared.
You can select an angle and chamfer up to 10 C.

FUJIGEN KOGYO Co., Ltd.

Unhulled Men 45 ° shank Φ10 and others

FUJIGEN KOGYO Co., Ltd.

Unhulled Men nano　SCN0845E

It is now possible to perform machining on areas where chamfering or fumigation could not be performed due to interference from vise or clamp.
Center hole/fizzle processing, countersunk chamfering, and edge chamfering are possible.

FUJIGEN KOGYO Co., Ltd.

Arm For NICECUT (Negative S Type, 3 Pieces)　AMNS-03

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Arm For NICECUT (Negative S Type, 6 Pieces)　AMNS-06

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Arm For NICECUT (Negative T Type, 3 Pieces)　AMNT-03

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Arm For NICECUT (Negative T Type, 6 Pieces)　AMNT-06

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ12, Machining Diameter Φ30, Negative Type)　ARN12-30S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ16, Machining Diameter Φ40, Negative Type)　ARN16-40S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ12, Machining Diameter Φ30, Positive Type)　ARP12-30S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ16, Machining Diameter Φ40, Positive Type)　ARP16-40S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Center chamfer mill aluminum samurai Φ10 Long Type　AZ10-90-L120

Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.

FUJIGEN KOGYO Co., Ltd.

Center chamfer mill aluminum samurai Φ10　AZ10-90-L75

Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.

FUJIGEN KOGYO Co., Ltd.

Center chamfer mill aluminum samurai Φ4　AZ4-90-L60

Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.

FUJIGEN KOGYO Co., Ltd.

Center chamfer mill aluminum samurai Φ6　AZ6-90-L75

Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.

FUJIGEN KOGYO Co., Ltd.

Birdie sheet M8　BC16-14XS-M8

Significantly shortens the conventional process of cap bolt seat grinding.
The seat grinding and chamfering of the lower hole are performed simultaneously, and the depth of machining can be freely adjusted.

FUJIGEN KOGYO Co., Ltd.

Birdie sheet M10　BC20-17.5XS-M10

Significantly shortens the conventional process of cap bolt seat grinding.
The seat grinding and chamfering of the lower hole are performed simultaneously, and the depth of machining can be freely adjusted.

FUJIGEN KOGYO Co., Ltd.

Birdie sheet M12　BC20-20XS-M12

Significantly shortens the conventional process of cap bolt seat grinding.
The seat grinding and chamfering of the lower hole are performed simultaneously, and the depth of machining can be freely adjusted.

FUJIGEN KOGYO Co., Ltd.

Birdie sheet M14　BC25-23XS-M14

Significantly shortens the conventional process of cap bolt seat grinding.
The seat grinding and chamfering of the lower hole are performed simultaneously, and the depth of machining can be freely adjusted.