AS ONE Corporation

Melting Point Meter (Digital setting type) and others

AS ONE Corporation

Friction Tester Replacement Drum　MSS-D

Antistatic agent is applied to prevent static electricity.

AS ONE Corporation

Powder Metering and Feeding Machine (Screw Type)　PSF-200SA

In the normal mode, the feed speed and time can be set so that the same amount of feed can be supplied each time.
In the weighing mode, the powder is fed to the set value while the sample is weighed (An electronic balance and communication cable are required separately).

AS ONE Corporation

Melting Temperature Measurement Device and others

AS ONE Corporation

Vibration Testing Machine Attachment　CV-101A

Mounting/fixing hole pitch: 25 mm(2 x 6), mounting hole (for M5 x 12), fixing hole (phi 6.0 x 12)

AS ONE Corporation

Abrasion Tester 25rpm and others

AS ONE Corporation

Basic drop tester　RKS-1

This tester holds the sample in the chuck and allows it to fall naturally from any set height and angle.
The height and angle are calibrated for excellent reproducibility.

AS ONE Corporation

Simple reciprocating wear tester approx. 7kg and others

AS ONE Corporation

Simple Weathering Tester UV-A and others

AS ONE Corporation

pencil scratch hardness tester　PHT-45

Conforms to JIS K 5600.
The pencil is designed to be held at 45 degrees with a 750 g load on the tip, and the hardness and bond strength are measured with the hardness at which a scratch enters when caught.

AS ONE Corporation

Powder Measuring Feeder (Screw Type)　PSF-100SA

High-precision tabletop compact powder feeder - In normal mode, feed speed and time can be set to supply the same amount of powder every time.
In the weighing mode, the powder is fed to the set value while the sample is weighed (An electronic balance and communication cable are required separately).

AS ONE Corporation

［Discontinued］Friction Tester 25 rpm and others

AS ONE Corporation

［Discontinued］Powder Metering and Feeding Machine (Screw Type) Bridge Breaker for PSF -100 SA　BB-100SA

In the normal mode, the feed speed and time can be set to supply the same amount every time.
In the weighing mode, powder is supplied to the set value while weighing the sample (A separate electronic balance and communication cable are required).

AS ONE Corporation

［Discontinued］Powder Dispensing Machine　PF-100

There are three modes (timer, manual, continuous) that can be used for different purposes.
It has an external connection terminal and can be started/stopped by a non-voltage contact signal from the outside.

AS ONE Corporation

［Discontinued］Desktop Vibration Testing Machine　CV-101

JIS compliant vibration test can be carried out on the table.

AS ONE Corporation

［Discontinued］Desktop Vibration Testing Machine (Comply With JIS)　CV-301M

AS ONE Corporation

［Discontinued］Basic impact testing machine　SGS-1

This is a testing machine in which a hard ball is dropped from a set height to apply impact.
The hard ball comes with a diameter of 50 mm/509 g.