Spec

• DC drive: diaphragm system
• A diaphragm is used for the seal part of the compression chamber.
• Brushless: DC Motor
• Equipped with a highly durable, maintenance-free brushless motor.
• Liquid: A device for sucking and discharging liquid into the compression chamber.
• Rated voltage: 24 VDC
• Flow rate * 1:100 mL/min
• Working pressure range: 0~100 kPa{0~1kgf/cm2}
• Maximum pressure * 2:300 kPa{3kgf/cm2}
• Maximum current: 90 mA
• Rated Time: Continuous
• Useful Life (MTTF): 6000 hours
• Self Absorption Force * 1:10 kPa{75mmHg}
• Inlet Size: φ4.7 mm (Outer Diameter)
• Discharge Port Size: φ4.7 mm (Outer Diameter)
• Coil insulation class: Class E equivalent
• Mounting Dimensions: 9.5 (L) x 17 (W) mm
• Body Weight: 80 g
• *1) When the liquid becomes low, the check valve hardens and the flow rate and self-suction force decrease.
• *2) Restart from closed pressure is not possible. Do not use at maximum pressure.
• Terms of Use
• Operating Ambient Temperature: 5~40°C
• Operating ambient humidity: 30~85%
• Operating fluid temperature: 5~50°C
• [Wetted Part Material and Applicable Fluid]
• Materials Used: Cylinder Head/PPS Polyphenylene Sulfide, Head Cover/PPS Polyphenylene Sulfide, Diaphragm/PTFE Fluororesin, Check Valve/FKM Fluororubber, O-Ring/FKM Fluororubber
• Appropriate chemical resistance * 1: Ethanol, carbon tetrachloride, tricrene, xylene, silicone oil
• Examples of inadequate chemical resistance: acetone, chlorosulfonic acid, formalin, ammonia solution, glacial acetic acid
• *1) Appropriate chemical resistance is for reference only. Please check under operating conditions when using.
•