69-8624-08 Multi-Coupler MALC Model (Plug) SUS Single Unit Male Screw M20 x 1.5 MALC-2PSUSFKM
- Products InformationProducts Informationinit">
69-8624-08 Multi-Coupler MALC Model (Plug) SUS Single Unit Male Screw M20 x 1.5 MALC-2PSUSFKM 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NITTO KOHKI CO., LTD. 69-8624-08 Multi-Coupler MALC Model (Plug) SUS Single Unit Male Screw M20 x 1.5 MALC-2PSUSFKM
Features
- Simultaneously connect multiple pipes in one connection operation. Supports medium pressure applications.
- Compared to conventional "multi-couplers" (MAS and MAT types), the flow rate is approximately twice as large. It contributes to miniaturization of mounting plates. (* The rate of increase of the flow rate depends on the size.)
- Conventional "multi-couplers" allowed eccentricity up to φ0.6 mm, but the MALC type allowed eccentricity up to φ2 mm.
- Special valve shape allows pressurized connection up to 2 MPa.
- Since the dimension between plates when connecting is unified to 30 mm for all sizes, any size can be mounted on the same plate.
- Liquid dripping and air contamination are suppressed by adopting a dripping reduction valve structure.
Spec
- Plug
- MALC-1~12P Type (Screw Fixed Type for Medium Pressure)
- Mass (g): 75
- Dimension (L1) (mm): 33
- Dimension (L2) (mm): (20)
- Dimension (L3) (mm): 13
- Dimension (φD) (mm): 28
- Dimensions (H) (mm): Hex 26
- Dimensions (T) (mm): M20 x 1.5
- Maximum Working Pressure: 5.0 MPa{51kgf/cm2} (Single Unit/2.0 MPa{20kgf/cm2})
- Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
- Applicable fluids: water, hydraulic fluid, air
- Body Material: Stainless Steel (Only Socket Body Surface Treatment/Electroless Nickel Phosphorus Plating)
- Withstand Pressure: 7.5 MPa{76kgf/cm2} (Single Unit/3.0 MPa{31kgf/cm2})
- Seal Material: Fluororubber (FKM)
- Operating temperature range *: -20 to +180°C
- *The available temperature range depends on the operating conditions.
- Recommended maximum tightening torque: 30 N · m{306kgf · cm}
- Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
- Minimum cross-sectional area: 49.5 mm2
- Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
- Amount of air mixed at the time of connection: 0.14 mL * Varies depending on operating conditions
- Amount of liquid dripping at the time of separation: 0.14 mL * Varies according to operating conditions
- Maximum connection holding force: 4500 N{459kgf}
- Minimum Connection Holding Force Calculated *: P×345+180 N{p×3.45+18kgf}
- *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
Order No.Spec class="init"> 69-8624-08 Multi-Coupler MALC Model (Plug) SUS Single Unit Male Screw M20 x 1.5 MALC-2PSUSFKM 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NITTO KOHKI CO., LTD. 69-8624-08 Multi-Coupler MALC Model (Plug) SUS Single Unit Male Screw M20 x 1.5 MALC-2PSUSFKM
特徴
- Simultaneously connect multiple pipes in one connection operation. Supports medium pressure applications.
- Compared to conventional "multi-couplers" (MAS and MAT types), the flow rate is approximately twice as large. It contributes to miniaturization of mounting plates. (* The rate of increase of the flow rate depends on the size.)
- Conventional "multi-couplers" allowed eccentricity up to φ0.6 mm, but the MALC type allowed eccentricity up to φ2 mm.
- Special valve shape allows pressurized connection up to 2 MPa.
- Since the dimension between plates when connecting is unified to 30 mm for all sizes, any size can be mounted on the same plate.
- Liquid dripping and air contamination are suppressed by adopting a dripping reduction valve structure.
Spec
- Plug
- MALC-1~12P Type (Screw Fixed Type for Medium Pressure)
- Mass (g): 75
- Dimension (L1) (mm): 33
- Dimension (L2) (mm): (20)
- Dimension (L3) (mm): 13
- Dimension (φD) (mm): 28
- Dimensions (H) (mm): Hex 26
- Dimensions (T) (mm): M20 x 1.5
- Maximum Working Pressure: 5.0 MPa{51kgf/cm2} (Single Unit/2.0 MPa{20kgf/cm2})
- Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
- Applicable fluids: water, hydraulic fluid, air
- Body Material: Stainless Steel (Only Socket Body Surface Treatment/Electroless Nickel Phosphorus Plating)
- Withstand Pressure: 7.5 MPa{76kgf/cm2} (Single Unit/3.0 MPa{31kgf/cm2})
- Seal Material: Fluororubber (FKM)
- Operating temperature range *: -20 to +180°C
- *The available temperature range depends on the operating conditions.
- Recommended maximum tightening torque: 30 N · m{306kgf · cm}
- Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
- Minimum cross-sectional area: 49.5 mm2
- Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
- Amount of air mixed at the time of connection: 0.14 mL * Varies depending on operating conditions
- Amount of liquid dripping at the time of separation: 0.14 mL * Varies according to operating conditions
- Maximum connection holding force: 4500 N{459kgf}
- Minimum Connection Holding Force Calculated *: P×345+180 N{p×3.45+18kgf}
- *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
Order No. 69-8624-08 Model No.ASONEs="init"> 69-8624-08 Multi-Coupler MALC Model (Plug) SUS Single Unit Male Screw M20 x 1.5 MALC-2PSUSFKM 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NITTO KOHKI CO., LTD. 69-8624-08 Multi-Coupler MALC Model (Plug) SUS Single Unit Male Screw M20 x 1.5 MALC-2PSUSFKM
Features
- Simultaneously connect multiple pipes in one connection operation. Supports medium pressure applications.
- Compared to conventional "multi-couplers" (MAS and MAT types), the flow rate is approximately twice as large. It contributes to miniaturization of mounting plates. (* The rate of increase of the flow rate depends on the size.)
- Conventional "multi-couplers" allowed eccentricity up to φ0.6 mm, but the MALC type allowed eccentricity up to φ2 mm.
- Special valve shape allows pressurized connection up to 2 MPa.
- Since the dimension between plates when connecting is unified to 30 mm for all sizes, any size can be mounted on the same plate.
- Liquid dripping and air contamination are suppressed by adopting a dripping reduction valve structure.
Spec
- Plug
- MALC-1~12P Type (Screw Fixed Type for Medium Pressure)
- Mass (g): 75
- Dimension (L1) (mm): 33
- Dimension (L2) (mm): (20)
- Dimension (L3) (mm): 13
- Dimension (φD) (mm): 28
- Dimensions (H) (mm): Hex 26
- Dimensions (T) (mm): M20 x 1.5
- Maximum Working Pressure: 5.0 MPa{51kgf/cm2} (Single Unit/2.0 MPa{20kgf/cm2})
- Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
- Applicable fluids: water, hydraulic fluid, air
- Body Material: Stainless Steel (Only Socket Body Surface Treatment/Electroless Nickel Phosphorus Plating)
- Withstand Pressure: 7.5 MPa{76kgf/cm2} (Single Unit/3.0 MPa{31kgf/cm2})
- Seal Material: Fluororubber (FKM)
- Operating temperature range *: -20 to +180°C
- *The available temperature range depends on the operating conditions.
- Recommended maximum tightening torque: 30 N · m{306kgf · cm}
- Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
- Minimum cross-sectional area: 49.5 mm2
- Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
- Amount of air mixed at the time of connection: 0.14 mL * Varies depending on operating conditions
- Amount of liquid dripping at the time of separation: 0.14 mL * Varies according to operating conditions
- Maximum connection holding force: 4500 N{459kgf}
- Minimum Connection Holding Force Calculated *: P×345+180 N{p×3.45+18kgf}
- *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
Order No. 69-8624-08 Model No. MALC-2PSUSFKM JAN Code 4992338116453 Standard price JPY: 13,280 USD: 83.25 Excange rate 1USD= 159.53JPY
Valid price in JapanQuantity 1piece Stock in Japan 
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
69-8624-07 Multicoupler MALC Model (Plug) SUS Single Unit Male Screw M16 x 1 MALC-1PSUSFKM MALC-1PSUSFKM 1piece JPY: 11,430 USD: 71.65 
69-8624-08 Multi-Coupler MALC Model (Plug) SUS Single Unit Male Screw M20 x 1.5 MALC-2PSUSFKM MALC-2PSUSFKM 1piece JPY: 13,280 USD: 83.25 
69-8624-09 Multicoupler MALC Model (Plug) SUS Single Unit Male Screw M24 x 1.5 MALC-3PSUSFKM MALC-3PSUSFKM 1piece JPY: 16,790 USD: 105.25 
69-8624-10 Multi-Coupler MALC Model (Plug) SUS Single Unit Male Screw M35 x 1.5 MALC-4PSUSFKM MALC-4PSUSFKM 1piece JPY: 21,200 USD: 132.89 
69-8624-11 Multi-Coupler MALC Model (Plug) SUS Single Unit Male Screw M40 x 2 MALC-6PSUSFKM MALC-6PSUSFKM 1piece JPY: 26,800 USD: 167.99 
69-8624-12 Multi-Coupler MALC Model (Plug) SUS Single Unit Male Screw M45 x 2 MALC-8PSUSFKM MALC-8PSUSFKM 1piece JPY: 33,200 USD: 208.11 
69-8624-13 Multi-Coupler MALC Model (Plug) SUS Single Unit Male Screw M62 x 2 MALC-12PSUSFKM MALC-12PSUSFKM 1piece JPY: 94,300 USD: 591.11