Spec

• Plug
• MALC-1~12P Type (Screw Fixed Type for Medium Pressure)
• Mass (g): 40
• Dimension (L1) (mm): 32
• Dimension (L2) (mm): (18)
• Dimension (L3) (mm): 14
• Dimension (φD) (mm): 21
• Dimensions (H) (mm): Hex 19
• Dimensions (T) (mm): M16 x 1
• Maximum Working Pressure: 7.0 MPa{71kgf/cm2} (Single Unit/2.0 MPa{20kgf/cm2})
• Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
• Applicable fluids: water, hydraulic fluid, air
• Body Material: Stainless Steel (Only Socket Body Surface Treatment/Electroless Nickel Phosphorus Plating)
• Withstand Pressure: 10.5 MPa{107kgf/cm2} (Single Unit/3.0 MPa{31kgf/cm2})
• Seal Material: Fluororubber (FKM)
• Operating temperature range *: -20 to +180°C
• *The available temperature range depends on the operating conditions.
• Recommended maximum tightening torque: 20 N · m{204kgf · cm}
• Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
• Minimum cross-sectional area: 26 mm2
• Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
• Amount of air mixed at the time of connection: 0.08 mL * Varies depending on operating conditions
• Amount of liquid dripping at the time of separation: 0.08 mL * Varies according to operating conditions
• Maximum connection holding force: 2800 N{286kgf}
• Minimum Connection Holding Force Calculated *: P×170+85 N{p×1.7+8.5kgf}
• *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
•