63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF
FeaturesFeatures class="init">
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NICHIAS Corporation
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF
特徴
- This gasket is used as a silica filler for fluoropolymer PTFE, and can be used in a wide temperature range where creep (deformation) is small even if PTFE is used mainly.
- Because of its excellent electrical insulation, it is also used as an insulating gasket.
- It has excellent chemical resistance of acid system and can be used for strong acid system fluid.
- Process piping and equipment that require acid-based chemical resistance.
- Flange valves and equipment for low-pressure steam, steam return water, water supply and hot water supply piping.
- Gasket for electrical insulation.
SpecSpec class="init">
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NICHIAS Corporation
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF
特徴
- This gasket is used as a silica filler for fluoropolymer PTFE, and can be used in a wide temperature range where creep (deformation) is small even if PTFE is used mainly.
- Because of its excellent electrical insulation, it is also used as an insulating gasket.
- It has excellent chemical resistance of acid system and can be used for strong acid system fluid.
- Process piping and equipment that require acid-based chemical resistance.
- Flange valves and equipment for low-pressure steam, steam return water, water supply and hot water supply piping.
- Gasket for electrical insulation.
仕様
- bolt Hole Diameter (mm): 19
- bolt Number of Holes: 4
- bolt Hole Center Diameter (mm): 100
- outer diameter (mm): 135
- Nominal Diameter: 32
- Nominal Diameter: 1 1/4
- thickness (mm): 3
- pressure of use: 10
- Inner diameter (mm): 43
- Operating temperature range: – 200 to 200 ° C
- maximum working pressure : Water , Oil and Corrosive Fluid 1 to 3 MPa/Gas Fluid 1 to 2 MPa
- Maximum pressure varies with temperature
- Plastic/Finishing: Fluorine material (PTFE), Silica
- Country of origin: Japan
- Code Number: 115 -1684
-
Package size：135×135×3 mm 90 g
[About Package size]
Order No.
63-2361-97
Model No.
9007LC-10K-32A-3T-FF
Standard price
JPY: 6,700
USD: 42.03
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1sheet
Stock in JapanStock in Japanass="init">
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NICHIAS Corporation
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF
特徴
- This gasket is used as a silica filler for fluoropolymer PTFE, and can be used in a wide temperature range where creep (deformation) is small even if PTFE is used mainly.
- Because of its excellent electrical insulation, it is also used as an insulating gasket.
- It has excellent chemical resistance of acid system and can be used for strong acid system fluid.
- Process piping and equipment that require acid-based chemical resistance.
- Flange valves and equipment for low-pressure steam, steam return water, water supply and hot water supply piping.
- Gasket for electrical insulation.
仕様
- bolt Hole Diameter (mm): 19
- bolt Number of Holes: 4
- bolt Hole Center Diameter (mm): 100
- outer diameter (mm): 135
- Nominal Diameter: 32
- Nominal Diameter: 1 1/4
- thickness (mm): 3
- pressure of use: 10
- Inner diameter (mm): 43
- Operating temperature range: – 200 to 200 ° C
- maximum working pressure : Water , Oil and Corrosive Fluid 1 to 3 MPa/Gas Fluid 1 to 2 MPa
- Maximum pressure varies with temperature
- Plastic/Finishing: Fluorine material (PTFE), Silica
- Country of origin: Japan
- Code Number: 115 -1684
-
荷姿サイズ：135×135×3 mm 90 g
[荷姿サイズについて]
アズワン品番
63-2361-97
型番
9007LC-10K-32A-3T-FF
標準価格
JPY: 6,700
USD: 42.03
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1sheet
在庫数
Supplier StockASONEs="init">
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NICHIAS Corporation
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF
Features
- This gasket is used as a silica filler for fluoropolymer PTFE, and can be used in a wide temperature range where creep (deformation) is small even if PTFE is used mainly.
- Because of its excellent electrical insulation, it is also used as an insulating gasket.
- It has excellent chemical resistance of acid system and can be used for strong acid system fluid.
- Process piping and equipment that require acid-based chemical resistance.
- Flange valves and equipment for low-pressure steam, steam return water, water supply and hot water supply piping.
- Gasket for electrical insulation.
Spec
- bolt Hole Diameter (mm): 19
- bolt Number of Holes: 4
- bolt Hole Center Diameter (mm): 100
- outer diameter (mm): 135
- Nominal Diameter: 32
- Nominal Diameter: 1 1/4
- thickness (mm): 3
- pressure of use: 10
- Inner diameter (mm): 43
- Operating temperature range: – 200 to 200 ° C
- maximum working pressure : Water , Oil and Corrosive Fluid 1 to 3 MPa/Gas Fluid 1 to 2 MPa
- Maximum pressure varies with temperature
- Plastic/Finishing: Fluorine material (PTFE), Silica
- Country of origin: Japan
- Code Number: 115 -1684
-
Package size：135×135×3 mm 90 g
[About Package size]
Order No.
63-2361-97
Model No.
9007LC-10K-32A-3T-FF
Standard price
JPY: 6,700
USD: 42.03
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1sheet
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
63-2361-93
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-100A-3T-FF
9007LC-10K-100A-3T-FF
1sheet
JPY: 15,600
USD: 97.86
63-2361-94
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-15A-3T-FF
9007LC-10K-15A-3T-FF
1sheet
JPY: 3,430
USD: 21.52
63-2361-95
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-20A-3T-FF
9007LC-10K-20A-3T-FF
1sheet
JPY: 3,840
USD: 24.09
63-2361-96
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-25A-3T-FF
9007LC-10K-25A-3T-FF
1sheet
JPY: 5,990
USD: 37.57
63-2361-97
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF
9007LC-10K-32A-3T-FF
1sheet
JPY: 6,700
USD: 42.03
63-2361-98
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-40A-3T-FF
9007LC-10K-40A-3T-FF
1sheet
JPY: 7,100
USD: 44.54
63-2361-99
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-50A-3T-FF
9007LC-10K-50A-3T-FF
1sheet
JPY: 8,730
USD: 54.76
63-2362-01
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-65A-3T-FF
9007LC-10K-65A-3T-FF
1sheet
JPY: 11,400
USD: 71.51
63-2362-02
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-80A-3T-FF
9007LC-10K-80A-3T-FF
1sheet
JPY: 12,900
USD: 80.92
63-2362-03
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-100A-3T-FF
9007LC-5K-100A-3T-FF
1sheet
JPY: 14,400
USD: 90.33
63-2362-04
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-15A-3T-FF
9007LC-5K-15A-3T-FF
1sheet
JPY: 2,580
USD: 16.18
63-2362-05
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-20A-3T-FF
9007LC-5K-20A-3T-FF
1sheet
JPY: 2,760
USD: 17.31
63-2362-06
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-25A-3T-FF
9007LC-5K-25A-3T-FF
1sheet
JPY: 3,590
USD: 22.52
63-2362-07
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-32A-3T-FF
9007LC-5K-32A-3T-FF
1sheet
JPY: 4,980
USD: 31.24
63-2362-08
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-40A-3T-FF
9007LC-5K-40A-3T-FF
1sheet
JPY: 5,450
USD: 34.19
63-2362-09
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-50A-3T-FF
9007LC-5K-50A-3T-FF
1sheet
JPY: 6,810
USD: 42.72
63-2362-10
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-65A-3T-FF
9007LC-5K-65A-3T-FF
1sheet
JPY: 8,950
USD: 56.14
63-2362-11
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-80A-3T-FF
9007LC-5K-80A-3T-FF
1sheet
JPY: 10,300
USD: 64.61
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF
特徴
- This gasket is used as a silica filler for fluoropolymer PTFE, and can be used in a wide temperature range where creep (deformation) is small even if PTFE is used mainly.
- Because of its excellent electrical insulation, it is also used as an insulating gasket.
- It has excellent chemical resistance of acid system and can be used for strong acid system fluid.
- Process piping and equipment that require acid-based chemical resistance.
- Flange valves and equipment for low-pressure steam, steam return water, water supply and hot water supply piping.
- Gasket for electrical insulation.
SpecSpec class="init">
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NICHIAS Corporation
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF
特徴
- This gasket is used as a silica filler for fluoropolymer PTFE, and can be used in a wide temperature range where creep (deformation) is small even if PTFE is used mainly.
- Because of its excellent electrical insulation, it is also used as an insulating gasket.
- It has excellent chemical resistance of acid system and can be used for strong acid system fluid.
- Process piping and equipment that require acid-based chemical resistance.
- Flange valves and equipment for low-pressure steam, steam return water, water supply and hot water supply piping.
- Gasket for electrical insulation.
仕様
- bolt Hole Diameter (mm): 19
- bolt Number of Holes: 4
- bolt Hole Center Diameter (mm): 100
- outer diameter (mm): 135
- Nominal Diameter: 32
- Nominal Diameter: 1 1/4
- thickness (mm): 3
- pressure of use: 10
- Inner diameter (mm): 43
- Operating temperature range: – 200 to 200 ° C
- maximum working pressure : Water , Oil and Corrosive Fluid 1 to 3 MPa/Gas Fluid 1 to 2 MPa
- Maximum pressure varies with temperature
- Plastic/Finishing: Fluorine material (PTFE), Silica
- Country of origin: Japan
- Code Number: 115 -1684
-
Package size：135×135×3 mm 90 g
[About Package size]
Order No.
63-2361-97
Model No.
9007LC-10K-32A-3T-FF
Standard price
JPY: 6,700
USD: 42.03
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1sheet
Stock in JapanStock in Japanass="init">
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NICHIAS Corporation
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF
特徴
- This gasket is used as a silica filler for fluoropolymer PTFE, and can be used in a wide temperature range where creep (deformation) is small even if PTFE is used mainly.
- Because of its excellent electrical insulation, it is also used as an insulating gasket.
- It has excellent chemical resistance of acid system and can be used for strong acid system fluid.
- Process piping and equipment that require acid-based chemical resistance.
- Flange valves and equipment for low-pressure steam, steam return water, water supply and hot water supply piping.
- Gasket for electrical insulation.
仕様
- bolt Hole Diameter (mm): 19
- bolt Number of Holes: 4
- bolt Hole Center Diameter (mm): 100
- outer diameter (mm): 135
- Nominal Diameter: 32
- Nominal Diameter: 1 1/4
- thickness (mm): 3
- pressure of use: 10
- Inner diameter (mm): 43
- Operating temperature range: – 200 to 200 ° C
- maximum working pressure : Water , Oil and Corrosive Fluid 1 to 3 MPa/Gas Fluid 1 to 2 MPa
- Maximum pressure varies with temperature
- Plastic/Finishing: Fluorine material (PTFE), Silica
- Country of origin: Japan
- Code Number: 115 -1684
-
荷姿サイズ：135×135×3 mm 90 g
[荷姿サイズについて]
アズワン品番
63-2361-97
型番
9007LC-10K-32A-3T-FF
標準価格
JPY: 6,700
USD: 42.03
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1sheet
在庫数
Supplier StockASONEs="init">
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NICHIAS Corporation
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF
Features
- This gasket is used as a silica filler for fluoropolymer PTFE, and can be used in a wide temperature range where creep (deformation) is small even if PTFE is used mainly.
- Because of its excellent electrical insulation, it is also used as an insulating gasket.
- It has excellent chemical resistance of acid system and can be used for strong acid system fluid.
- Process piping and equipment that require acid-based chemical resistance.
- Flange valves and equipment for low-pressure steam, steam return water, water supply and hot water supply piping.
- Gasket for electrical insulation.
Spec
- bolt Hole Diameter (mm): 19
- bolt Number of Holes: 4
- bolt Hole Center Diameter (mm): 100
- outer diameter (mm): 135
- Nominal Diameter: 32
- Nominal Diameter: 1 1/4
- thickness (mm): 3
- pressure of use: 10
- Inner diameter (mm): 43
- Operating temperature range: – 200 to 200 ° C
- maximum working pressure : Water , Oil and Corrosive Fluid 1 to 3 MPa/Gas Fluid 1 to 2 MPa
- Maximum pressure varies with temperature
- Plastic/Finishing: Fluorine material (PTFE), Silica
- Country of origin: Japan
- Code Number: 115 -1684
-
Package size：135×135×3 mm 90 g
[About Package size]
Order No.
63-2361-97
Model No.
9007LC-10K-32A-3T-FF
Standard price
JPY: 6,700
USD: 42.03
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1sheet
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
63-2361-93
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-100A-3T-FF
9007LC-10K-100A-3T-FF
1sheet
JPY: 15,600
USD: 97.86
63-2361-94
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-15A-3T-FF
9007LC-10K-15A-3T-FF
1sheet
JPY: 3,430
USD: 21.52
63-2361-95
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-20A-3T-FF
9007LC-10K-20A-3T-FF
1sheet
JPY: 3,840
USD: 24.09
63-2361-96
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-25A-3T-FF
9007LC-10K-25A-3T-FF
1sheet
JPY: 5,990
USD: 37.57
63-2361-97
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF
9007LC-10K-32A-3T-FF
1sheet
JPY: 6,700
USD: 42.03
63-2361-98
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-40A-3T-FF
9007LC-10K-40A-3T-FF
1sheet
JPY: 7,100
USD: 44.54
63-2361-99
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-50A-3T-FF
9007LC-10K-50A-3T-FF
1sheet
JPY: 8,730
USD: 54.76
63-2362-01
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-65A-3T-FF
9007LC-10K-65A-3T-FF
1sheet
JPY: 11,400
USD: 71.51
63-2362-02
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-80A-3T-FF
9007LC-10K-80A-3T-FF
1sheet
JPY: 12,900
USD: 80.92
63-2362-03
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-100A-3T-FF
9007LC-5K-100A-3T-FF
1sheet
JPY: 14,400
USD: 90.33
63-2362-04
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-15A-3T-FF
9007LC-5K-15A-3T-FF
1sheet
JPY: 2,580
USD: 16.18
63-2362-05
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-20A-3T-FF
9007LC-5K-20A-3T-FF
1sheet
JPY: 2,760
USD: 17.31
63-2362-06
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-25A-3T-FF
9007LC-5K-25A-3T-FF
1sheet
JPY: 3,590
USD: 22.52
63-2362-07
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-32A-3T-FF
9007LC-5K-32A-3T-FF
1sheet
JPY: 4,980
USD: 31.24
63-2362-08
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-40A-3T-FF
9007LC-5K-40A-3T-FF
1sheet
JPY: 5,450
USD: 34.19
63-2362-09
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-50A-3T-FF
9007LC-5K-50A-3T-FF
1sheet
JPY: 6,810
USD: 42.72
63-2362-10
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-65A-3T-FF
9007LC-5K-65A-3T-FF
1sheet
JPY: 8,950
USD: 56.14
63-2362-11
NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-80A-3T-FF
9007LC-5K-80A-3T-FF
1sheet
JPY: 10,300
USD: 64.61
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF
特徴
- This gasket is used as a silica filler for fluoropolymer PTFE, and can be used in a wide temperature range where creep (deformation) is small even if PTFE is used mainly.
- Because of its excellent electrical insulation, it is also used as an insulating gasket.
- It has excellent chemical resistance of acid system and can be used for strong acid system fluid.
- Process piping and equipment that require acid-based chemical resistance.
- Flange valves and equipment for low-pressure steam, steam return water, water supply and hot water supply piping.
- Gasket for electrical insulation.
仕様
- bolt Hole Diameter (mm): 19
- bolt Number of Holes: 4
- bolt Hole Center Diameter (mm): 100
- outer diameter (mm): 135
- Nominal Diameter: 32
- Nominal Diameter: 1 1/4
- thickness (mm): 3
- pressure of use: 10
- Inner diameter (mm): 43
- Operating temperature range: – 200 to 200 ° C
- maximum working pressure : Water , Oil and Corrosive Fluid 1 to 3 MPa/Gas Fluid 1 to 2 MPa
- Maximum pressure varies with temperature
- Plastic/Finishing: Fluorine material (PTFE), Silica
- Country of origin: Japan
- Code Number: 115 -1684
Package size：135×135×3 mm 90 g [About Package size]
| Order No. | 63-2361-97 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model No. | 9007LC-10K-32A-3T-FF | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Standard price |
JPY: 6,700
USD: 42.03
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Quantity | 1sheet | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stock in JapanStock in Japanass="init">
63-2361-97 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF特徴
仕様
荷姿サイズ：135×135×3 mm 90 g [荷姿サイズについて]
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||