63-2361-93 NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-100A-3T-FF
特徴
- This gasket is used as a silica filler for fluoropolymer PTFE, and can be used in a wide temperature range where creep (deformation) is small even if PTFE is used mainly.
- Because of its excellent electrical insulation, it is also used as an insulating gasket.
- It has excellent chemical resistance of acid system and can be used for strong acid system fluid.
- Process piping and equipment that require acid-based chemical resistance.
- Flange valves and equipment for low-pressure steam, steam return water, water supply and hot water supply piping.
- Gasket for electrical insulation.
仕様
- bolt Hole Diameter (mm): 19
- bolt Number of Holes: 8
- bolt Hole Center Diameter (mm): 175
- outer diameter (mm): 210
- Nominal Diameter: 100
- Nominal Diameter: 4
- thickness (mm): 3
- pressure of use: 10
- Inner diameter (mm): 115
- Operating temperature range: – 200 to 200 ° C
- maximum working pressure : Water , Oil and Corrosive Fluid 1 to 3 MPa/Gas Fluid 1 to 2 MPa
- Maximum pressure varies with temperature
- Plastic/Finishing: Fluorine material (PTFE), Silica
- Country of origin: Japan
- Code Number: 115 -1689
Package size：210×210×3 mm 230 g [荷姿サイズについて]
| アズワン品番 | 63-2361-93 | |
|---|---|---|
| 型番 | 9007LC-10K-100A-3T-FF | |
| 標準価格 |
JPY: 15,600
USD: 97.79
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 入り数 | 1sheet | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
 |
63-2361-93 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-100A-3T-FF | 9007LC-10K-100A-3T-FF | 1sheet | JPY: 15,600 | USD: 97.79 |
|
|
 |
63-2361-94 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-15A-3T-FF | 9007LC-10K-15A-3T-FF | 1sheet | JPY: 3,430 | USD: 21.50 |
|
|
 |
63-2361-95 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-20A-3T-FF | 9007LC-10K-20A-3T-FF | 1sheet | JPY: 3,840 | USD: 24.07 |
|
|
 |
63-2361-96 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-25A-3T-FF | 9007LC-10K-25A-3T-FF | 1sheet | JPY: 5,990 | USD: 37.55 |
|
|
 |
63-2361-97 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-32A-3T-FF | 9007LC-10K-32A-3T-FF | 1sheet | JPY: 6,700 | USD: 42.00 |
|
|
 |
63-2361-98 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-40A-3T-FF | 9007LC-10K-40A-3T-FF | 1sheet | JPY: 7,100 | USD: 44.51 |
|
|
 |
63-2361-99 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-50A-3T-FF | 9007LC-10K-50A-3T-FF | 1sheet | JPY: 8,730 | USD: 54.72 |
|
|
 |
63-2362-01 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-65A-3T-FF | 9007LC-10K-65A-3T-FF | 1sheet | JPY: 11,400 | USD: 71.46 |
|
|
 |
63-2362-02 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-10K-80A-3T-FF | 9007LC-10K-80A-3T-FF | 1sheet | JPY: 12,900 | USD: 80.86 |
|
|
 |
63-2362-03 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-100A-3T-FF | 9007LC-5K-100A-3T-FF | 1sheet | JPY: 14,400 | USD: 90.27 |
|
|
 |
63-2362-04 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-15A-3T-FF | 9007LC-5K-15A-3T-FF | 1sheet | JPY: 2,580 | USD: 16.17 |
|
|
 |
63-2362-05 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-20A-3T-FF | 9007LC-5K-20A-3T-FF | 1sheet | JPY: 2,760 | USD: 17.30 |
|
|
 |
63-2362-06 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-25A-3T-FF | 9007LC-5K-25A-3T-FF | 1sheet | JPY: 3,590 | USD: 22.50 |
|
|
 |
63-2362-07 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-32A-3T-FF | 9007LC-5K-32A-3T-FF | 1sheet | JPY: 4,980 | USD: 31.22 |
|
|
 |
63-2362-08 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-40A-3T-FF | 9007LC-5K-40A-3T-FF | 1sheet | JPY: 5,450 | USD: 34.16 |
|
|
 |
63-2362-09 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-50A-3T-FF | 9007LC-5K-50A-3T-FF | 1sheet | JPY: 6,810 | USD: 42.69 |
|
|
 |
63-2362-10 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-65A-3T-FF | 9007LC-5K-65A-3T-FF | 1sheet | JPY: 8,950 | USD: 56.10 |
|
|
 |
63-2362-11 | NAFLON™ Special Filler PTFE Cut Gasket 9007LC-5K-80A-3T-FF | 9007LC-5K-80A-3T-FF | 1sheet | JPY: 10,300 | USD: 64.57 |
|