Features

Standard Tube Pump, Stable Flow Rate
Roller set is integrated and easy to attach and detach.
The stopper at both ends of the tube case has a locking mechanism. The tube can be easily moved and changed since it can be locked at the time of setting.
High discharge accuracy and excellent flow rate repeatability. It is also suitable for feeding a small amount of liquid.
Since the machining tolerance of the tube case is specified, there is little variation in the flow rate and discharge pressure of tube replacement by combining with the purity tube which specifies the tolerance of tube thickness.

Spec

Low Flow
Fixed-width groove type
Flow rate range: 5 ~ 72.5 mL/h
Flow rate accuracy: +/- 2% (within +/- 1% repeatability)
Maximum discharge pressure: 147 kPa (1.5 kg/cm 2)
Maximum suction pressure: 9.8 kPa (0.1 kg/cm 2)
Liquid viscosity and temperature used: Max. 2 Pa/s (2000 cP)/0 ~ 60 deg.
rotation settings: volume settings
Liquid feeding direction: forward/reverse switchable
Motor: AC speed control induction motor 　Output 15 W
Driving circuit: Speed feedback control
Tube case: PVC resin
Safety features: Thermal protector, fuse
Number of tubes: 1
Number of tube case tiers: 1 tier
Usable tube materials: Silicon, Tygon (R), Versilon (Fullan (R)), Pharmed (R)
Usable tube diameter: inner diameter 3.7 x outer diameter 6.1 mm
Operating ambient temperature range: 0 ~ 40 degrees Celsius (noncondensing)
External dimensions: 137 x 145 (164) x 178 (191) mm/* Dimensions in () include projections.
Weight: approximately 3.3 kg
Power input/voltage: 0.4 A, 40 VA/AC 100 V 50/60 Hz
*Performance is based on room temperature of 20 degrees Celsius, rated power supply voltage, water, liquid temperature of 18 degrees Celsius, back pressure of 0, and silicon tube.
*Tubes sold separately. Performance such as flow rate and discharge pressure varies slightly depending on the tube used.
Code: 251350