Tube Pump Program Type　PP-DP1-200

Provided with an LCD to facilitate program setting.　
Allows to set various programs such as ON/OFF/CYCLE/ROTATION/LIMIT/SPEED/SUCTION BACK.

AS ONE Corporation

Water Level Holding Controller　WLC-SA2

The water level sensor is suction type, so it can be installed at any depth inside the water tank. (Cable length: approx. 300 mm) The water level sensor can be replaced with a footswitch (sold separately), and forced fluid feed using the footswitch is also possible.
It has a wall mounting hole (Dharma hole) on the back and can be fixed with two M4 screws.

AS ONE Corporation

Tubing Pump 0.01 to 10 mL/min and others

AS ONE Corporation

Tube for Tubing Pump TP -5 SA and others

Surpass Industry

Disposable Pressure Sensor Diaphragm Section APS-P3/P 10 Dual Use 10 pcs　DPS-P

Use with the DPS series amplifier section (DPS-APS-P3, DPS-APS-P 10). (Pressure cannot be measured by this product alone.)
DPS-P can also be used as a disposable part of the tube pump FW series.

AS ONE Corporation

Smart Tube Pump Set　FPC100-1515

The tube can be changed with one touch.
It has a trigger button for a quick start.

AS ONE Corporation

Coupling for Smart Tube Pump　

AS ONE Corporation

Front Laboratory Micro Tube Pump Set for Micro Tubes and others

AS ONE Corporation

Front Laboratory Micro Tube Pump Set Single Lever Down Type (1515)　FP100-1515

A small flow tube pump for the lab. Various tube sizes are also available.
The tube can be changed with one touch.

AS ONE Corporation

Front Lab Tubing Pump Set, Single Lever Down, 480 mL/min and others

AS ONE Corporation

Pump Head for Tubing Pump for Micro Tube and others

AS ONE Corporation

Additional Pump Head for Tubing Pump and others

AS ONE Corporation

Tubing Pump 313/US 200 Type (1 ch)　-

Flow liquid and slurry to a constant volume.
There is no grand seal valve and there is no worry of valve leakage or seal leakage.

AS ONE Corporation

Tubing Pump　DSP-100SA

The desired flow rate can be set digitally.
High flow accuracy (for water) within ±3% of the set flow rate.

AS ONE Corporation

Tubing Pump Tube Cartridge for DSP-100SA　-

Tube cartridge for 0.05~10.0 mL flow rate.

AS ONE Corporation

Tubing Pump Tube Cartridge for DSP-100SA　-

Tube cartridge for 0.5~100 mL flow rate.

AS ONE Corporation

Tubing Pump 5 - 90mL/Min and others

AS ONE Corporation

Tubing Pump　MP-1983E

It is self-sucking type, so there is no need to call water.
By controlling the rotation by the microcomputer, stable pump action can be obtained from low speed.

AS ONE Corporation

Cassette Tube Pump Number Of Tube Cases 1 and others

AS ONE Corporation

Tubing pump (with input terminal)　MTP1200

A self-contained tube pump that does not require priming.
This tube pump has an external input terminal and can be controlled by attaching a float switch or stop button.

AS ONE Corporation

Replacement Tube Set for Tubing Pump　

AS ONE Corporation

Emergency stop button for tubing pump　EMS-PR-M4-1.5M

Push-cut type emergency stop button.

KNF Co., Ltd.

Liquid Feed Pump NF300KT.18S and others

Master Flex

Liquid Delivery pumps (Variable pumps) and others

Master Flex

Liquid Feed Pump 6 - 600rpm and others

Master Flex

Standard Pump Head L/S13 Iron and others

Master Flex

Standard Pump Head L/S13 Stainless (Stainless Steel (SUS304)) and others

Master Flex

Easy Load Pump Head Stainless Steel and others

Master Flex

Multi-Channel Pump Head 7519-05　42143

You can load up to eight tube cartridges.
Tubes of different diameters can be used in one cartridge.

Master Flex

Tube Cartridge for Multi-Channel Pump Head (Small) and others

Master Flex

Mounting Bracket for Multiple Pump Head Number Of Heads 2 and others

ATTO CORPORATION

Perista(TM) Pump, Number of Flow Channels 1, 7-700mL/h and others

ATTO CORPORATION

PERISTA Bio Mini Pump　1221200/AC-2120

Perista pump with high accuracy and high flow rate.
On the illuminating panel switch, the operating state is indicated by the point illumination.

Master Flex

Liquid Feed Pump (Digital Pump) 0.01 - 600rpm and others

Master Flex

Teflon Tube Pump Head　77390-00

Suitable for organic solvents, corrosive solutions, filtration and chemical injection.
The welding part is only the inner surface of the tube.

Master Flex

Easy Loading 3 Pump Head Iron L/S13, 14, 16, 17, 18 and others

Master Flex

Easy-Load Pump Head II, Adapt Tube L/S13, 14, 16, 17, 18, 25 and others

Master Flex

Mounting Metal Fitting For Easy-Load Pump Head Continuous Fitting, 2 Pieces and others

Quantitative Liquid Feed Pump　NRP-3000

constant feed pump and others