Spec

• Speed range: 180 ~ 1800 rpm (50/60 Hz) continuously variable
• Evaporation capacity and operating vacuum: 5.28 L/h hot water at 70 degrees C circulation, 3.3 kPa/20 L/h steam at 98.1 Pa, 8.0 kPa
• Viscosity used: about 3000 cP
• Rotating shaft seals: mechanical seals
• Evaporation tube: SUS jacket type
• Cooler: Vertical triple serpentine type hard glass Cooling area: 1.33 m2
• Receiving flask: 10 L for both concentrate and evaporant side (with drain cock)
• Wetted part material: Hard glass, Teflon (R), SUS 304
• Connection diameter: outside diameter of suction nozzle: 21 mm, outside diameter of cooling water nozzle: 17 mm
• Heating method: Hot water circulating steam
• Sample injection method: Needle valve with float meter
• Operating ambient temperature range: 5 ~ 35 degrees C
• External dimensions: 1150 x 600 x 2760 mm
• Power input/voltage: 16 A, 3.2 kVA/AC 200 V 3-phase 50/60 Hz
• *Vacuum pumps, cooling water circulators, etc. are required for use.
• *Power plug not included.
• *Performance is measured at room temperature of 20 degrees Celsius and rated supply voltage.
• *Evaporation capacity varies depending on conditions such as decompression conditions, hot water circulation and cooling water temperature.
• *The degree of vacuum during operation depends on the cooling water temperature, the decompression device and the sample.
• Code: 117700
•