63-1395-49 ［Discontinued］Thin film evaporator F-70
Features
- The heating time is controlled by adjusting the original control ring (PAT.), rotation speed, and sample supply, so even heat-sensitive substances can be concentrated in the proper state.
- Heating by circulating hot water into a glass-jacketed evaporator allows precise temperature control and easy confirmation of the concentrated state.
- The evaporating and concentrating liquid collection container has a drain cock, so it can be continuously concentrated and collected by cock operation.
Spec
- Speed range: 140 ~ 1300 rpm (50/60 Hz) continuously variable
- Evaporating capacity: 1.5 L/h hot water 70 degrees C circulating
- Operating vacuum: 2.5 kPa
- Viscosity used: about 100 cP
- Rotating shaft seal: Non-seal with magnet coupling
- Evaporation tube: glass-jacketed
- Cooler: Vertical triple serpentine cooling area: 0.5 m2
- Receiving flask: 3 L for both concentrate and evaporant side (with drain cock)
- Wetted part material: Hard glass, Teflon (R), SUS 304
- Connection diameter: outside diameter of suction/cooling nozzle: 16 mm
- Heating system: Hot water circulation
- Sample injection method: Needle valve
- Operating ambient temperature range: 5 ~ 35 degrees C
- External dimensions: 620 x 500 x 1970 mm
- Power input/voltage: 2 A, 200 VA/AC 100 V 50/60 Hz
- *Performance is measured at room temperature of 20 degrees Celsius and rated supply voltage.
- *Evaporation capacity varies depending on conditions such as decompression conditions, hot water circulation and cooling water temperature.
- *The degree of vacuum during operation depends on the cooling water temperature, the decompression device and the sample.
- *Vacuum pumps, cooling water circulators, etc. are required for use.
- Code: 1175902
| Order No. | 63-1395-49 | |
|---|---|---|
| Model No. | F-70 | |
| JAN Code | 4573528531807 | |
| Standard price |
JPY: 2,490,000
USD: 15,492.78
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1unit | |
|
||
| Stock in Japan | - | |
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
63-1395-49 | ［Discontinued］Thin film evaporator F-70 | F-70 |
|
1unit | JPY: 2,490,000 | USD: 15,492.78 |
-
|
 |
63-1395-50 | ［Discontinued］Thin film evaporator F-150 | F-150 |
|
1unit | JPY: 6,600,000 | USD: 41,065.21 |
-
|