62-2903-63 SK 11 Hex Axis 3 x Speed Drill S3SD-8HEX
特徴
- About 3 times the drilling speed (our company ratio), ideal for drilling iron, stainless steel, etc.
- Drilling iron, stainless steel, aluminum, wood and resin.
- Cutting resistance has been reduced due to the unique cutting edge shape (sizes below 3.8 mm are usually cutting edges).
- The drilling speed is 3 times faster (compared to the manufacturer) because the cutting is done in 2 places, the center and the outer periphery.
- Hard to burr and close to a round hole.
- It is not susceptible to heat action caused by friction.
- Since the load on the drill is small, the battery can be reduced.
仕様
- Diameter: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0 mm
- hex axis
- compatible models: Electric Drill/Rechargeable Drill Driver/Rechargeable Impact Driver
- Applicable plate thickness: iron (Drill Diameter x 3 Times), Stainless Steel (Drill Diameter x 1/2 Times)
- 8 Pieces
荷姿サイズ：103×13×150 mm 120 g [荷姿サイズについて]
| アズワン品番 | 62-2903-63 | |
|---|---|---|
| 型番 | S3SD-8HEX | |
| JANコード | 4977292370370 | |
| 標準価格 |
JPY: 2,200
USD: 13.69
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 入り数 | 1set | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
 |
62-2903-63 | SK 11 Hex Axis 3 x Speed Drill S3SD-8HEX | S3SD-8HEX | 1set | JPY: 2,200 | USD: 13.69 |
|
|
 |
62-2903-64 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 10.0MM | 10.0MM | 1piece | JPY: 1,247 | USD: 7.76 |
-
|
|
 |
62-2903-65 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 11.0MM | 11.0MM | 1piece | JPY: 1,507 | USD: 9.38 |
-
|
|
 |
62-2903-66 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 12.0MM | 12.0MM | 1piece | JPY: 1,787 | USD: 11.12 |
-
|
|
 |
62-2903-67 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 13.0MM | 13.0MM | 1piece | JPY: 2,025 | USD: 12.60 |
-
|
|
 |
62-2903-82 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 4.0MM | 4.0MM | 1piece | JPY: 351 | USD: 2.18 |
-
|
|
 |
62-2903-83 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 4.0MM3PCS | 4.0MM3PCS | 1piece | JPY: 956 | USD: 5.95 |
-
|
|
 |
62-2903-84 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 4.2MM | 4.2MM | 1piece | JPY: 362 | USD: 2.25 |
-
|
|
 |
62-2903-85 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 4.3MM | 4.3MM | 1piece | JPY: 351 | USD: 2.18 |
-
|
|
 |
62-2903-86 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 4.5MM | 4.5MM | 1piece | JPY: 383 | USD: 2.38 |
-
|
|
 |
62-2903-87 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 4.5MM3PCS | 4.5MM3PCS | 1piece | JPY: 1,031 | USD: 6.42 |
-
|
|
 |
62-2903-88 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 4.8MM | 4.8MM | 1piece | JPY: 405 | USD: 2.52 |
-
|
|
 |
62-2903-89 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 5.0MM | 5.0MM | 1piece | JPY: 416 | USD: 2.59 |
-
|
|
 |
62-2903-90 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 5.0MM3PCS | 5.0MM3PCS | 1piece | JPY: 1,134 | USD: 7.06 |
-
|
|
 |
62-2903-91 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 5.5MM | 5.5MM | 1piece | JPY: 448 | USD: 2.79 |
-
|
|
 |
62-2903-92 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 6.0MM | 6.0MM | 1piece | JPY: 502 | USD: 3.12 |
-
|
|
 |
62-2903-93 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 6.5MM | 6.5MM | 1piece | JPY: 545 | USD: 3.39 |
-
|
|
 |
62-2903-94 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 7.0MM | 7.0MM | 1piece | JPY: 621 | USD: 3.86 |
-
|
|
 |
62-2903-95 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 7.5MM | 7.5MM | 1piece | JPY: 653 | USD: 4.06 |
-
|
|
 |
62-2903-96 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 8.0MM | 8.0MM | 1piece | JPY: 869 | USD: 5.41 |
-
|
|
 |
62-2903-97 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 8.5MM | 8.5MM | 1piece | JPY: 880 | USD: 5.48 |
-
|
|
 |
62-2903-98 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 9.0MM | 9.0MM | 1piece | JPY: 1,021 | USD: 6.35 |
-
|
|
 |
62-2903-99 | ［Discontinued］SK11 Hex Shaft 3 × Speed Drill 9.5MM | 9.5MM | 1piece | JPY: 1,107 | USD: 6.89 |
-
|