61-7832-50 ［Discontinued］TAC Cutter DPD24160R
Features
- Ultra-light all-diamond TAC mill.
- By incorporating a special blade, surface roughness is improved and burr is suppressed.
- Successfully reduced the thickness and weight of 1700 g and 35 mm cutter height at φ125.
- The rise speed up to the set speed is improved.
- Plenty of chip variations, such as regular blades and clean blades.
- With hole for center through coolant.
- With the use of a full blade adjustment mechanism, accuracy can be achieved to a front deflection of 5 μm or less.
- Diameter invariant type capable of resharpening (0.1 mm×8 times).
- G16 grade balance and centroid resistance structure enables high-speed cutting at Vc=4000 m/min.
- To realize weight reduction without lowering rigidity by simulating stress applied to a cutter body.
- Applicable Work Material: Non-Ferrous Metals
- For general machining of aluminum alloys and non-ferrous metals.
- For front and shoulder shaving.
Spec
- Rake Angle (°): A.R. + 7 to + 8.5/R.R. 0 to + 5
- Max Cut (ap; mm): 7
- number of blades: 6
- outer diameter (φDc; mm ) : 160
- Hole Diameter (φd); mm ) : 50.8
- Mounting hole height (l); mm ) : 38
- Cutter Height (Lf; mm ) : 63
- End keyway depth (b); mm ) : 11
- End keyway width (a); mm ) : 19
- Weight ( kg ) : 4.8
- bolt Seat Diameter (φd1); mm ) : 72
- Usage Insert: YDEN 2405 PDFR-D/YDEN 2405 PDFR-WD/YDEN 2405 PDFR-BD
- Used Parts: Insert Presser Screw (FW -245 R/L), Presser Screw Clamping screw (FDS -8 ST), Fine Adjustment screw (ASM 34 L), Insert Clamping Spanner (T -27 T), Fine Adjustment Spanner (T -6 F)
| Order No. | 61-7832-50 | |
|---|---|---|
| Model No. | DPD24160R | |
| Standard price |
JPY: 174,000
USD: 1,090.70
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
|
||
| Stock in Japan | - | |
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
61-7832-47 | ［Discontinued］TAC Cutter DPD24080R | DPD24080R | 1piece | JPY: 108,000 | USD: 676.99 |
-
|
|
 |
61-7832-48 | ［Discontinued］TAC Cutter DPD24100R | DPD24100R | 1piece | JPY: 118,000 | USD: 739.67 |
-
|
|
 |
61-7832-49 | ［Discontinued］TAC Cutter DPD24125R | DPD24125R | 1piece | JPY: 159,000 | USD: 996.68 |
-
|
|
 |
61-7832-50 | ［Discontinued］TAC Cutter DPD24160R | DPD24160R | 1piece | JPY: 174,000 | USD: 1,090.70 |
-
|