61-7832-48 ［Discontinued］TAC Cutter DPD24100R
Features
- Ultra-light all-diamond TAC mill.
- By incorporating a special blade, surface roughness is improved and burr is suppressed.
- Successfully reduced the thickness and weight of 1700 g and 35 mm cutter height at φ125.
- The rise speed up to the set speed is improved.
- Plenty of chip variations, such as regular blades and clean blades.
- With hole for center through coolant.
- With the use of a full blade adjustment mechanism, accuracy can be achieved to a front deflection of 5 μm or less.
- Diameter invariant type capable of resharpening (0.1 mm×8 times).
- G16 grade balance and centroid resistance structure enables high-speed cutting at Vc=4000 m/min.
- To realize weight reduction without lowering rigidity by simulating stress applied to a cutter body.
- Applicable Work Material: Non-Ferrous Metals
- For general machining of aluminum alloys and non-ferrous metals.
- For front and shoulder shaving.
SpecSpec class="init">
［Discontinued］TAC Cutter DPD24100R 61-7832-48 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
TUNGALOY CORPORATION
61-7832-48 ［Discontinued］TAC Cutter DPD24100R
特徴
- Ultra-light all-diamond TAC mill.
- By incorporating a special blade, surface roughness is improved and burr is suppressed.
- Successfully reduced the thickness and weight of 1700 g and 35 mm cutter height at φ125.
- The rise speed up to the set speed is improved.
- Plenty of chip variations, such as regular blades and clean blades.
- With hole for center through coolant.
- With the use of a full blade adjustment mechanism, accuracy can be achieved to a front deflection of 5 μm or less.
- Diameter invariant type capable of resharpening (0.1 mm×8 times).
- G16 grade balance and centroid resistance structure enables high-speed cutting at Vc=4000 m/min.
- To realize weight reduction without lowering rigidity by simulating stress applied to a cutter body.
- Applicable Work Material: Non-Ferrous Metals
- For general machining of aluminum alloys and non-ferrous metals.
- For front and shoulder shaving.
Spec
- Rake Angle (°): A.R. + 7 to + 8.5/R.R. 0 to + 5
- Max Cut (ap; mm): 7
- number of blades: 4
- outer diameter (φDc; mm ) : 100
- Hole Diameter (φd); mm ) : 31.75
- Mounting hole height (l); mm ) : 32
- Cutter Height (Lf; mm ) : 50
- End keyway depth (b); mm): 8
- End keyway width (a); mm ) : 12.7
- Weight ( kg ) : 2.1
- bolt Seat Diameter (φd1); mm ) : 29
- bolt Hole Diameter (φd2); mm ) : 17
- Usage Insert: YDEN 2405 PDFR-D/YDEN 2405 PDFR-WD/YDEN 2405 PDFR-BD
- Used Parts: Insert Presser Screw (FW -243 R/L), Presser Screw Clamping screw (FDS -8 ST), Fine Adjustment screw (ASM 34 L), Insert Clamping Spanner (T -27 T), Fine Adjustment Spanner (T -6 F)
-
Order No.Order No.ss="init">
［Discontinued］TAC Cutter DPD24100R 61-7832-48 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
TUNGALOY CORPORATION
61-7832-48 ［Discontinued］TAC Cutter DPD24100R
特徴
- Ultra-light all-diamond TAC mill.
- By incorporating a special blade, surface roughness is improved and burr is suppressed.
- Successfully reduced the thickness and weight of 1700 g and 35 mm cutter height at φ125.
- The rise speed up to the set speed is improved.
- Plenty of chip variations, such as regular blades and clean blades.
- With hole for center through coolant.
- With the use of a full blade adjustment mechanism, accuracy can be achieved to a front deflection of 5 μm or less.
- Diameter invariant type capable of resharpening (0.1 mm×8 times).
- G16 grade balance and centroid resistance structure enables high-speed cutting at Vc=4000 m/min.
- To realize weight reduction without lowering rigidity by simulating stress applied to a cutter body.
- Applicable Work Material: Non-Ferrous Metals
- For general machining of aluminum alloys and non-ferrous metals.
- For front and shoulder shaving.
仕様
- Rake Angle (°): A.R. + 7 to + 8.5/R.R. 0 to + 5
- Max Cut (ap; mm): 7
- number of blades: 4
- outer diameter (φDc; mm ) : 100
- Hole Diameter (φd); mm ) : 31.75
- Mounting hole height (l); mm ) : 32
- Cutter Height (Lf; mm ) : 50
- End keyway depth (b); mm): 8
- End keyway width (a); mm ) : 12.7
- Weight ( kg ) : 2.1
- bolt Seat Diameter (φd1); mm ) : 29
- bolt Hole Diameter (φd2); mm ) : 17
- Usage Insert: YDEN 2405 PDFR-D/YDEN 2405 PDFR-WD/YDEN 2405 PDFR-BD
- Used Parts: Insert Presser Screw (FW -243 R/L), Presser Screw Clamping screw (FDS -8 ST), Fine Adjustment screw (ASM 34 L), Insert Clamping Spanner (T -27 T), Fine Adjustment Spanner (T -6 F)
-
アズワン品番
61-7832-48
Model No.
DPD24100R
標準価格
JPY: 118,000
USD: 740.18
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
-
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
NameASONEs="init">
［Discontinued］TAC Cutter DPD24100R 61-7832-48 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
TUNGALOY CORPORATION
61-7832-48 ［Discontinued］TAC Cutter DPD24100R
Features
- Ultra-light all-diamond TAC mill.
- By incorporating a special blade, surface roughness is improved and burr is suppressed.
- Successfully reduced the thickness and weight of 1700 g and 35 mm cutter height at φ125.
- The rise speed up to the set speed is improved.
- Plenty of chip variations, such as regular blades and clean blades.
- With hole for center through coolant.
- With the use of a full blade adjustment mechanism, accuracy can be achieved to a front deflection of 5 μm or less.
- Diameter invariant type capable of resharpening (0.1 mm×8 times).
- G16 grade balance and centroid resistance structure enables high-speed cutting at Vc=4000 m/min.
- To realize weight reduction without lowering rigidity by simulating stress applied to a cutter body.
- Applicable Work Material: Non-Ferrous Metals
- For general machining of aluminum alloys and non-ferrous metals.
- For front and shoulder shaving.
Spec
- Rake Angle (°): A.R. + 7 to + 8.5/R.R. 0 to + 5
- Max Cut (ap; mm): 7
- number of blades: 4
- outer diameter (φDc; mm ) : 100
- Hole Diameter (φd); mm ) : 31.75
- Mounting hole height (l); mm ) : 32
- Cutter Height (Lf; mm ) : 50
- End keyway depth (b); mm): 8
- End keyway width (a); mm ) : 12.7
- Weight ( kg ) : 2.1
- bolt Seat Diameter (φd1); mm ) : 29
- bolt Hole Diameter (φd2); mm ) : 17
- Usage Insert: YDEN 2405 PDFR-D/YDEN 2405 PDFR-WD/YDEN 2405 PDFR-BD
- Used Parts: Insert Presser Screw (FW -243 R/L), Presser Screw Clamping screw (FDS -8 ST), Fine Adjustment screw (ASM 34 L), Insert Clamping Spanner (T -27 T), Fine Adjustment Spanner (T -6 F)
-
Order No.
61-7832-48
Model No.
DPD24100R
Standard price
JPY: 118,000
USD: 740.18
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
-
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-7832-47
［Discontinued］TAC Cutter DPD24080R
DPD24080R
1piece
JPY: 108,000
USD: 677.46
-
61-7832-48
［Discontinued］TAC Cutter DPD24100R
DPD24100R
1piece
JPY: 118,000
USD: 740.18
-
61-7832-49
［Discontinued］TAC Cutter DPD24125R
DPD24125R
1piece
JPY: 159,000
USD: 997.37
-
61-7832-50
［Discontinued］TAC Cutter DPD24160R
DPD24160R
1piece
JPY: 174,000
USD: 1,091.46
-
61-7832-48 ［Discontinued］TAC Cutter DPD24100R
特徴
- Ultra-light all-diamond TAC mill.
- By incorporating a special blade, surface roughness is improved and burr is suppressed.
- Successfully reduced the thickness and weight of 1700 g and 35 mm cutter height at φ125.
- The rise speed up to the set speed is improved.
- Plenty of chip variations, such as regular blades and clean blades.
- With hole for center through coolant.
- With the use of a full blade adjustment mechanism, accuracy can be achieved to a front deflection of 5 μm or less.
- Diameter invariant type capable of resharpening (0.1 mm×8 times).
- G16 grade balance and centroid resistance structure enables high-speed cutting at Vc=4000 m/min.
- To realize weight reduction without lowering rigidity by simulating stress applied to a cutter body.
- Applicable Work Material: Non-Ferrous Metals
- For general machining of aluminum alloys and non-ferrous metals.
- For front and shoulder shaving.
Spec
- Rake Angle (°): A.R. + 7 to + 8.5/R.R. 0 to + 5
- Max Cut (ap; mm): 7
- number of blades: 4
- outer diameter (φDc; mm ) : 100
- Hole Diameter (φd); mm ) : 31.75
- Mounting hole height (l); mm ) : 32
- Cutter Height (Lf; mm ) : 50
- End keyway depth (b); mm): 8
- End keyway width (a); mm ) : 12.7
- Weight ( kg ) : 2.1
- bolt Seat Diameter (φd1); mm ) : 29
- bolt Hole Diameter (φd2); mm ) : 17
- Usage Insert: YDEN 2405 PDFR-D/YDEN 2405 PDFR-WD/YDEN 2405 PDFR-BD
- Used Parts: Insert Presser Screw (FW -243 R/L), Presser Screw Clamping screw (FDS -8 ST), Fine Adjustment screw (ASM 34 L), Insert Clamping Spanner (T -27 T), Fine Adjustment Spanner (T -6 F)
Order No.Order No.ss="init">
61-7832-48 ［Discontinued］TAC Cutter DPD24100R特徴
仕様
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|