61-6995-33 Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ25 ±3μm PA-25HEL
Features
- Thin metal foil with small holes or slits of 400 μm or less.
- It is used for special filters, laser diffraction experiments, and microscope magnification calibration.
- High roundness holes and high parallelism slits have been realized by precision etching.
- For YAG laser (1064 nm) and CO2 laser (10.6 μm), use high energy laser pinhole coated with high reflectivity gold on high heat conduction copper.
- Pinhole foil (or slit foil) is held in an aluminum frame so it can be easily handled.
- Iris aperture (IH) is available when any aperture larger than φ1mm is required.
- * If dust adheres to the pin hole, light may not pass through the hole.
- * If light does not pass through the hole, blow the area around the hole with an air blower.
- * Pinhole foil and slit foil are very thin and fragile.
- * Pressing it with your finger or poking it with a sharp object may tear the foil.
- * The holes can hardly be seen visually.
- * Please check using a high magnification microscope.
- * For the orientation of the fixed slit, check the position of the marking indicating the slit width.
- * Even pinholes for high-power lasers may be damaged if the pulsed laser is focused.
- * When using for high power laser or pulse laser, calculate the energy density of the laser spot and confirm that it does not exceed the damage threshold before use.
Spec
- [
common specification] - Hole geometry/perfect circle
- Pinhole material/copper
- Foil thickness/20 ±5μm
- Pinhole finish/gold coat (both faces)
- Damage threshold (reference)/50MW/cm2 (@ 700nm)
- Wavelength used/700nm - 10.6μm
- Frame material/aluminum
- Frame finish/Black anodic oxide
- [Individual specification]
- Pinhole diameter: φ25±3μm
- Mass: 0.001kg
- RoHS conform product
| Order No. | 61-6995-33 | |
|---|---|---|
| Model No. | PA-25HEL | |
| Standard price |
JPY: 34,500
USD: 214.66
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product VariationsASONEs="init">
61-6995-33 Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ25 ±3μm PA-25HEL 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6995-33 Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ25 ±3μm PA-25HEL
Features
- Thin metal foil with small holes or slits of 400 μm or less.
- It is used for special filters, laser diffraction experiments, and microscope magnification calibration.
- High roundness holes and high parallelism slits have been realized by precision etching.
- For YAG laser (1064 nm) and CO2 laser (10.6 μm), use high energy laser pinhole coated with high reflectivity gold on high heat conduction copper.
- Pinhole foil (or slit foil) is held in an aluminum frame so it can be easily handled.
- Iris aperture (IH) is available when any aperture larger than φ1mm is required.
- * If dust adheres to the pin hole, light may not pass through the hole.
- * If light does not pass through the hole, blow the area around the hole with an air blower.
- * Pinhole foil and slit foil are very thin and fragile.
- * Pressing it with your finger or poking it with a sharp object may tear the foil.
- * The holes can hardly be seen visually.
- * Please check using a high magnification microscope.
- * For the orientation of the fixed slit, check the position of the marking indicating the slit width.
- * Even pinholes for high-power lasers may be damaged if the pulsed laser is focused.
- * When using for high power laser or pulse laser, calculate the energy density of the laser spot and confirm that it does not exceed the damage threshold before use.
Spec
- [
common specification]
- Hole geometry/perfect circle
- Pinhole material/copper
- Foil thickness/20 ±5μm
- Pinhole finish/gold coat (both faces)
- Damage threshold (reference)/50MW/cm2 (@ 700nm)
- Wavelength used/700nm - 10.6μm
- Frame material/aluminum
- Frame finish/Black anodic oxide
- [Individual specification]
- Pinhole diameter: φ25±3μm
- Mass: 0.001kg
- RoHS conform product
-
Order No.
61-6995-33
Model No.
PA-25HEL
Standard price
JPY: 34,500
USD: 214.66
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6995-17
Precision Pinhole, Slit Pinhole Hole Diameter Φ1 +1/-0μm PA-1
PA-1
1piece
JPY: 23,000
USD: 143.11
61-6995-18
Precision Pinhole, Slit Pinhole Hole Diameter Φ2 ±1μm PA-2
PA-2
1piece
JPY: 20,700
USD: 128.80
61-6995-19
Precision Pinhole, Slit Pinhole Hole Diameter Φ5 ±2μm PA-5
PA-5
1piece
JPY: 18,400
USD: 114.49
61-6995-20
Precision Pinhole, Slit Pinhole Hole Diameter Φ10 ±2μm PA-10
PA-10
1piece
JPY: 18,400
USD: 114.49
61-6995-21
Precision Pinhole, Slit Pinhole Hole Diameter Φ15 ±2μm PA-15
PA-15
1piece
JPY: 18,400
USD: 114.49
61-6995-22
Precision Pinhole, Slit Pinhole Hole Diameter Φ20 ±2μm PA-20
PA-20
1piece
JPY: 16,100
USD: 100.17
61-6995-23
Precision Pinhole, Slit Pinhole Hole Diameter Φ25 ±3μm PA-25
PA-25
1piece
JPY: 16,100
USD: 100.17
61-6995-24
Precision Pinhole, Slit Pinhole Hole Diameter Φ30 ±3μm PA-30
PA-30
1piece
JPY: 16,100
USD: 100.17
61-6995-25
Precision Pinhole, Slit Pinhole Hole Diameter Φ40 ±3μm PA-40
PA-40
1piece
JPY: 16,100
USD: 100.17
61-6995-26
Precision Pinhole, Slit Pinhole Hole Diameter Φ50 ±4μm PA-50
PA-50
1piece
JPY: 16,100
USD: 100.17
61-6995-27
Precision Pinhole, Slit Pinhole Hole Diameter Φ100 ±5μm PA-100
PA-100
1piece
JPY: 16,100
USD: 100.17
61-6995-28
Precision Pinhole, Slit Pinhole Hole Diameter Φ200 ±6μm PA-200
PA-200
1piece
JPY: 16,100
USD: 100.17
61-6995-29
Precision Pinhole, Slit Pinhole Hole Diameter Φ400 ±8μm PA-400
PA-400
1piece
JPY: 16,100
USD: 100.17
61-6995-30
Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ5 ±2μm PA-5HEL
PA-5HEL
1piece
JPY: 34,500
USD: 214.66
61-6995-31
Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ10 ±2μm PA-10HEL
PA-10HEL
1piece
JPY: 34,500
USD: 214.66
61-6995-32
Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ15 ±2μm PA-15HEL
PA-15HEL
1piece
JPY: 34,500
USD: 214.66
61-6995-33
Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ25 ±3μm PA-25HEL
PA-25HEL
1piece
JPY: 34,500
USD: 214.66
61-6995-34
Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ50 ±4μm PA-50HEL
PA-50HEL
1piece
JPY: 34,500
USD: 214.66
61-6995-35
Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ100 ±4μm PA-100HEL
PA-100HEL
1piece
JPY: 34,500
USD: 214.66
61-6995-36
Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ200 ±6μm PA-200HEL
PA-200HEL
1piece
JPY: 34,500
USD: 214.66
61-6995-37
Precision Pinhole for High Energy Laser Slit Width 5 ±2μm FSL-5
FSL-5
1piece
JPY: 28,800
USD: 179.19
61-6995-38
Precision Pinhole for High Energy Laser Slit Width 10 ±2μm FSL-10
FSL-10
1piece
JPY: 28,800
USD: 179.19
61-6995-39
Precision Pinhole for High Energy Laser Slit Width 25 ±3μm FSL-25
FSL-25
1piece
JPY: 28,800
USD: 179.19
61-6995-40
Precision Pinhole for High Energy Laser Slit Width 50 ±4μm FSL-50
FSL-50
1piece
JPY: 25,300
USD: 157.42
61-6995-41
Precision Pinhole for High Energy Laser Slit Width 100 ±5μm FSL-100
FSL-100
1piece
JPY: 25,300
USD: 157.42
61-6995-42
Precision Pinhole for High Energy Laser Slit Width 150 ±5μm FSL-150
FSL-150
1piece
JPY: 25,300
USD: 157.42
61-6995-43
Precision Pinhole for High Energy Laser Slit Width 200 ±6μm FSL-200
FSL-200
1piece
JPY: 25,300
USD: 157.42
61-6995-33 Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ25 ±3μm PA-25HEL
Features
- Thin metal foil with small holes or slits of 400 μm or less.
- It is used for special filters, laser diffraction experiments, and microscope magnification calibration.
- High roundness holes and high parallelism slits have been realized by precision etching.
- For YAG laser (1064 nm) and CO2 laser (10.6 μm), use high energy laser pinhole coated with high reflectivity gold on high heat conduction copper.
- Pinhole foil (or slit foil) is held in an aluminum frame so it can be easily handled.
- Iris aperture (IH) is available when any aperture larger than φ1mm is required.
- * If dust adheres to the pin hole, light may not pass through the hole.
- * If light does not pass through the hole, blow the area around the hole with an air blower.
- * Pinhole foil and slit foil are very thin and fragile.
- * Pressing it with your finger or poking it with a sharp object may tear the foil.
- * The holes can hardly be seen visually.
- * Please check using a high magnification microscope.
- * For the orientation of the fixed slit, check the position of the marking indicating the slit width.
- * Even pinholes for high-power lasers may be damaged if the pulsed laser is focused.
- * When using for high power laser or pulse laser, calculate the energy density of the laser spot and confirm that it does not exceed the damage threshold before use.
Spec
- [
common specification] - Hole geometry/perfect circle
- Pinhole material/copper
- Foil thickness/20 ±5μm
- Pinhole finish/gold coat (both faces)
- Damage threshold (reference)/50MW/cm2 (@ 700nm)
- Wavelength used/700nm - 10.6μm
- Frame material/aluminum
- Frame finish/Black anodic oxide
- [Individual specification]
- Pinhole diameter: φ25±3μm
- Mass: 0.001kg
- RoHS conform product
| Order No. | 61-6995-33 | |
|---|---|---|
| Model No. | PA-25HEL | |
| Standard price |
JPY: 34,500
USD: 214.66
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
61-6995-17 | Precision Pinhole, Slit Pinhole Hole Diameter Φ1 +1/-0μm PA-1 | PA-1 | 1piece | JPY: 23,000 | USD: 143.11 |
|
|
|
61-6995-18 | Precision Pinhole, Slit Pinhole Hole Diameter Φ2 ±1μm PA-2 | PA-2 | 1piece | JPY: 20,700 | USD: 128.80 |
|
|
|
61-6995-19 | Precision Pinhole, Slit Pinhole Hole Diameter Φ5 ±2μm PA-5 | PA-5 | 1piece | JPY: 18,400 | USD: 114.49 |
|
|
|
61-6995-20 | Precision Pinhole, Slit Pinhole Hole Diameter Φ10 ±2μm PA-10 | PA-10 | 1piece | JPY: 18,400 | USD: 114.49 |
|
|
|
61-6995-21 | Precision Pinhole, Slit Pinhole Hole Diameter Φ15 ±2μm PA-15 | PA-15 | 1piece | JPY: 18,400 | USD: 114.49 |
|
|
|
61-6995-22 | Precision Pinhole, Slit Pinhole Hole Diameter Φ20 ±2μm PA-20 | PA-20 | 1piece | JPY: 16,100 | USD: 100.17 |
|
|
|
61-6995-23 | Precision Pinhole, Slit Pinhole Hole Diameter Φ25 ±3μm PA-25 | PA-25 | 1piece | JPY: 16,100 | USD: 100.17 |
|
|
|
61-6995-24 | Precision Pinhole, Slit Pinhole Hole Diameter Φ30 ±3μm PA-30 | PA-30 | 1piece | JPY: 16,100 | USD: 100.17 |
|
|
|
61-6995-25 | Precision Pinhole, Slit Pinhole Hole Diameter Φ40 ±3μm PA-40 | PA-40 | 1piece | JPY: 16,100 | USD: 100.17 |
|
|
|
61-6995-26 | Precision Pinhole, Slit Pinhole Hole Diameter Φ50 ±4μm PA-50 | PA-50 | 1piece | JPY: 16,100 | USD: 100.17 |
|
|
|
61-6995-27 | Precision Pinhole, Slit Pinhole Hole Diameter Φ100 ±5μm PA-100 | PA-100 | 1piece | JPY: 16,100 | USD: 100.17 |
|
|
|
61-6995-28 | Precision Pinhole, Slit Pinhole Hole Diameter Φ200 ±6μm PA-200 | PA-200 | 1piece | JPY: 16,100 | USD: 100.17 |
|
|
|
61-6995-29 | Precision Pinhole, Slit Pinhole Hole Diameter Φ400 ±8μm PA-400 | PA-400 | 1piece | JPY: 16,100 | USD: 100.17 |
|
|
|
61-6995-30 | Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ5 ±2μm PA-5HEL | PA-5HEL | 1piece | JPY: 34,500 | USD: 214.66 |
|
|
|
61-6995-31 | Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ10 ±2μm PA-10HEL | PA-10HEL | 1piece | JPY: 34,500 | USD: 214.66 |
|
|
|
61-6995-32 | Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ15 ±2μm PA-15HEL | PA-15HEL | 1piece | JPY: 34,500 | USD: 214.66 |
|
|
|
61-6995-33 | Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ25 ±3μm PA-25HEL | PA-25HEL | 1piece | JPY: 34,500 | USD: 214.66 |
|
|
|
61-6995-34 | Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ50 ±4μm PA-50HEL | PA-50HEL | 1piece | JPY: 34,500 | USD: 214.66 |
|
|
|
61-6995-35 | Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ100 ±4μm PA-100HEL | PA-100HEL | 1piece | JPY: 34,500 | USD: 214.66 |
|
|
|
61-6995-36 | Precision Pinhole for High Energy Laser Pinhole Hole Diameter Φ200 ±6μm PA-200HEL | PA-200HEL | 1piece | JPY: 34,500 | USD: 214.66 |
|
|
|
61-6995-37 | Precision Pinhole for High Energy Laser Slit Width 5 ±2μm FSL-5 | FSL-5 | 1piece | JPY: 28,800 | USD: 179.19 |
|
|
|
61-6995-38 | Precision Pinhole for High Energy Laser Slit Width 10 ±2μm FSL-10 | FSL-10 | 1piece | JPY: 28,800 | USD: 179.19 |
|
|
|
61-6995-39 | Precision Pinhole for High Energy Laser Slit Width 25 ±3μm FSL-25 | FSL-25 | 1piece | JPY: 28,800 | USD: 179.19 |
|
|
|
61-6995-40 | Precision Pinhole for High Energy Laser Slit Width 50 ±4μm FSL-50 | FSL-50 | 1piece | JPY: 25,300 | USD: 157.42 |
|
|
|
61-6995-41 | Precision Pinhole for High Energy Laser Slit Width 100 ±5μm FSL-100 | FSL-100 | 1piece | JPY: 25,300 | USD: 157.42 |
|
|
|
61-6995-42 | Precision Pinhole for High Energy Laser Slit Width 150 ±5μm FSL-150 | FSL-150 | 1piece | JPY: 25,300 | USD: 157.42 |
|
|
|
61-6995-43 | Precision Pinhole for High Energy Laser Slit Width 200 ±6μm FSL-200 | FSL-200 | 1piece | JPY: 25,300 | USD: 157.42 |
|