61-6988-75 Kinematic Mirror Holder Adaptive Element Size Φ30mm MHG-HS30
特徴
- This is a very simple shaped kinematic mirror holder made of two boards.
- Since the structure is simple, it is excellent for aging and temperature change.
- Can be used as a mirror holder for laser resonators and interferometers.
- There are two types, MHG-HS which is a Takayasu type mirror holder and MHG-MP which is a mass production type mirror holder.
- The high stability type (MHG-HS) has a large screw knob that allows adjustment of the fulcrum as well as the two points of action, and also the vertical displacement of the mirror.
- Other than the MHG-HS type, the adjustment screw has a set bolt type locking mechanism.
- The mirror side is held in place at three points so that the stress generated when the mirror is held in place can be adjusted.
- Since there is no restriction on the effective diameter due to the screw ring, a large effective diameter can be obtained with reflected or transmitted light.
- Can be attached to a post stand (PST: sold separately) or a rod (RO: sold separately) on the tip M6.
- The production type (MHG-MP) can be fixed directly to the plate or stage with M4 screws.
- * The center of rotation of the mass-produced type (MHG-MP) is located outside the mirror (the fulcrum of the holder).
- * Use the rod mounting plate (MHG -** BPRO) when fixing the Takayasu standard (MHG-HS) to a flat surface.
- * The optical axis is 10 mm higher when the rod mounting plate (MHG -** BPRO) is used.
- * Since the mirror frame is attached to the rear side of the mirror, the position of the reflecting surface changes when the mirror thickness changes.
仕様
- [
common specification] - Main material: Aluminum (brass only for MHG-MP12.7)
- Surface treatment: Black anodic oxide (super black chrome only for MHG-MP12.7)
- [Individual specification]
- Compatible optics size: φ30mm
- Compatible optics thickness: 3 - 5mm
- Number of adjustment shafts: 3 axes
- Adjustment range, tilt: ±3°
- Adjustment range, rotation: ±3°
- Resolution, rotation: Approximately 0.39°/rotation
- Resolution, tilt: Approximately 0.39°/rotation
- Mass: 0.12kg
- RoHS conform product
荷姿サイズ：55×55×50 mm [荷姿サイズについて]
| アズワン品番 | 61-6988-75 | |
|---|---|---|
| 型番 | MHG-HS30 | |
| 標準価格 |
JPY: 11,500
USD: 72.09
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | Stock [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
 |
61-6988-73 | Kinematic Mirror Holder Adaptive Element Size Φ12.7mm MHG-MP12.7 | MHG-MP12.7 | 1piece | JPY: 13,800 | USD: 86.50 |
|
|
 |
61-6988-74 | Kinematic Mirror Holder Adaptive Element Size Φ25mm, Φ25.4mm MHG-HS25 | MHG-HS25 | 1piece | JPY: 11,500 | USD: 72.09 |
|
|
 |
61-6988-75 | Kinematic Mirror Holder Adaptive Element Size Φ30mm MHG-HS30 | MHG-HS30 | 1piece | JPY: 11,500 | USD: 72.09 |
|
|
 |
61-6988-76 | Kinematic Mirror Holder Adaptive Element Size Φ50mm MHG-MP50 | MHG-MP50 | 1piece | JPY: 17,300 | USD: 108.44 |
|
|
 |
61-6988-77 | Kinematic Mirror Holder Adaptive Element Size Φ50.8mm MHG-MP50.8 | MHG-MP50.8 | 1piece | JPY: 17,300 | USD: 108.44 |
|
Related ProductsASONEs="init">
61-6988-75 Kinematic Mirror Holder Adaptive Element Size Φ30mm MHG-HS30 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6988-75 Kinematic Mirror Holder Adaptive Element Size Φ30mm MHG-HS30
Features
- This is a very simple shaped kinematic mirror holder made of two boards.
- Since the structure is simple, it is excellent for aging and temperature change.
- Can be used as a mirror holder for laser resonators and interferometers.
- There are two types, MHG-HS which is a Takayasu type mirror holder and MHG-MP which is a mass production type mirror holder.
- The high stability type (MHG-HS) has a large screw knob that allows adjustment of the fulcrum as well as the two points of action, and also the vertical displacement of the mirror.
- Other than the MHG-HS type, the adjustment screw has a set bolt type locking mechanism.
- The mirror side is held in place at three points so that the stress generated when the mirror is held in place can be adjusted.
- Since there is no restriction on the effective diameter due to the screw ring, a large effective diameter can be obtained with reflected or transmitted light.
- Can be attached to a post stand (PST: sold separately) or a rod (RO: sold separately) on the tip M6.
- The production type (MHG-MP) can be fixed directly to the plate or stage with M4 screws.
- * The center of rotation of the mass-produced type (MHG-MP) is located outside the mirror (the fulcrum of the holder).
- * Use the rod mounting plate (MHG -** BPRO) when fixing the Takayasu standard (MHG-HS) to a flat surface.
- * The optical axis is 10 mm higher when the rod mounting plate (MHG -** BPRO) is used.
- * Since the mirror frame is attached to the rear side of the mirror, the position of the reflecting surface changes when the mirror thickness changes.
Spec
- [
common specification]
- Main material: Aluminum (brass only for MHG-MP12.7)
- Surface treatment: Black anodic oxide (super black chrome only for MHG-MP12.7)
- [Individual specification]
- Compatible optics size: φ30mm
- Compatible optics thickness: 3 - 5mm
- Number of adjustment shafts: 3 axes
- Adjustment range, tilt: ±3°
- Adjustment range, rotation: ±3°
- Resolution, rotation: Approximately 0.39°/rotation
- Resolution, tilt: Approximately 0.39°/rotation
- Mass: 0.12kg
- RoHS conform product
-
Package size：55×55×50 mm
[About Package size]
Order No.
61-6988-75
Model No.
MHG-HS30
Standard price
JPY: 11,500
USD: 72.09
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6988-73
Kinematic Mirror Holder Adaptive Element Size Φ12.7mm MHG-MP12.7
MHG-MP12.7
1piece
JPY: 13,800
USD: 86.50
61-6988-74
Kinematic Mirror Holder Adaptive Element Size Φ25mm, Φ25.4mm MHG-HS25
MHG-HS25
1piece
JPY: 11,500
USD: 72.09
61-6988-75
Kinematic Mirror Holder Adaptive Element Size Φ30mm MHG-HS30
MHG-HS30
1piece
JPY: 11,500
USD: 72.09
61-6988-76
Kinematic Mirror Holder Adaptive Element Size Φ50mm MHG-MP50
MHG-MP50
1piece
JPY: 17,300
USD: 108.44
61-6988-77
Kinematic Mirror Holder Adaptive Element Size Φ50.8mm MHG-MP50.8
MHG-MP50.8
1piece
JPY: 17,300
USD: 108.44
Related Products
1 / 1 ページ
61-6988-75 Kinematic Mirror Holder Adaptive Element Size Φ30mm MHG-HS30
Features
- This is a very simple shaped kinematic mirror holder made of two boards.
- Since the structure is simple, it is excellent for aging and temperature change.
- Can be used as a mirror holder for laser resonators and interferometers.
- There are two types, MHG-HS which is a Takayasu type mirror holder and MHG-MP which is a mass production type mirror holder.
- The high stability type (MHG-HS) has a large screw knob that allows adjustment of the fulcrum as well as the two points of action, and also the vertical displacement of the mirror.
- Other than the MHG-HS type, the adjustment screw has a set bolt type locking mechanism.
- The mirror side is held in place at three points so that the stress generated when the mirror is held in place can be adjusted.
- Since there is no restriction on the effective diameter due to the screw ring, a large effective diameter can be obtained with reflected or transmitted light.
- Can be attached to a post stand (PST: sold separately) or a rod (RO: sold separately) on the tip M6.
- The production type (MHG-MP) can be fixed directly to the plate or stage with M4 screws.
- * The center of rotation of the mass-produced type (MHG-MP) is located outside the mirror (the fulcrum of the holder).
- * Use the rod mounting plate (MHG -** BPRO) when fixing the Takayasu standard (MHG-HS) to a flat surface.
- * The optical axis is 10 mm higher when the rod mounting plate (MHG -** BPRO) is used.
- * Since the mirror frame is attached to the rear side of the mirror, the position of the reflecting surface changes when the mirror thickness changes.
Spec
- [
common specification] - Main material: Aluminum (brass only for MHG-MP12.7)
- Surface treatment: Black anodic oxide (super black chrome only for MHG-MP12.7)
- [Individual specification]
- Compatible optics size: φ30mm
- Compatible optics thickness: 3 - 5mm
- Number of adjustment shafts: 3 axes
- Adjustment range, tilt: ±3°
- Adjustment range, rotation: ±3°
- Resolution, rotation: Approximately 0.39°/rotation
- Resolution, tilt: Approximately 0.39°/rotation
- Mass: 0.12kg
- RoHS conform product
Package size：55×55×50 mm [About Package size]
| Order No. | 61-6988-75 | |
|---|---|---|
| Model No. | MHG-HS30 | |
| Standard price |
JPY: 11,500
USD: 72.09
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
61-6988-73 | Kinematic Mirror Holder Adaptive Element Size Φ12.7mm MHG-MP12.7 | MHG-MP12.7 | 1piece | JPY: 13,800 | USD: 86.50 |
|
|
|
61-6988-74 | Kinematic Mirror Holder Adaptive Element Size Φ25mm, Φ25.4mm MHG-HS25 | MHG-HS25 | 1piece | JPY: 11,500 | USD: 72.09 |
|
|
|
61-6988-75 | Kinematic Mirror Holder Adaptive Element Size Φ30mm MHG-HS30 | MHG-HS30 | 1piece | JPY: 11,500 | USD: 72.09 |
|
|
|
61-6988-76 | Kinematic Mirror Holder Adaptive Element Size Φ50mm MHG-MP50 | MHG-MP50 | 1piece | JPY: 17,300 | USD: 108.44 |
|
|
|
61-6988-77 | Kinematic Mirror Holder Adaptive Element Size Φ50.8mm MHG-MP50.8 | MHG-MP50.8 | 1piece | JPY: 17,300 | USD: 108.44 |
|
Related Products
1 / 1 ページ
