AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
SIGMAKOKI CO., LTD.

61-6938-10　Low Scattering Opticφ30mm Thickness 5mm Surface Flatness λ/10　OPCFSP-30C05-10-5

Features

  • Surface roughness was reduced to 0.2 nm (Ra) or less by special polishing of parallel planar substrates.
  • It can be used as a substrate for high-power laser mirrors and X-ray mirrors, where the influence of substrate scattering is concerned.
  • Use the wedge type when you are concerned about the effect of backside reflection such as a beam splitter.
  • CaF2 (calcium fluoride) and MgF2 (magnesium fluoride) have high permeability in the ultraviolet and infrared regions.
  • It is a nearly ideal substrate that is machined with high surface roughness (micro irregularities) and high surface accuracy (flatness of the entire surface).
  • * Both sides of the low scattering substrate are not coated.
  • * The surface of the glass reflects 2.5% to 4%.
  • * When the wedge type is used for transmission, the beam is inclined by about 0.5 degrees.
  • * CaF2 scratches easily and cannot be wiped with paper.
  • * Use an air blower to remove dust and dirt.
  • * If CaF2 or MgF2 is left in a high humidity environment for a long time, the surface will become rough.
  • * When not in use, store in an environment with low humidity such as auto dry.

SpecSpec class="init"> 61-6938-10 Low Scattering Opticφ30mm Thickness 5mm Surface Flatness λ/10　OPCFSP-30C05-10-5 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
SIGMAKOKI CO., LTD.

61-6938-10　Low Scattering Opticφ30mm Thickness 5mm Surface Flatness λ/10　OPCFSP-30C05-10-5

特徴

  • Surface roughness was reduced to 0.2 nm (Ra) or less by special polishing of parallel planar substrates.
  • It can be used as a substrate for high-power laser mirrors and X-ray mirrors, where the influence of substrate scattering is concerned.
  • Use the wedge type when you are concerned about the effect of backside reflection such as a beam splitter.
  • CaF2 (calcium fluoride) and MgF2 (magnesium fluoride) have high permeability in the ultraviolet and infrared regions.
  • It is a nearly ideal substrate that is machined with high surface roughness (micro irregularities) and high surface accuracy (flatness of the entire surface).
  • * Both sides of the low scattering substrate are not coated.
  • * The surface of the glass reflects 2.5% to 4%.
  • * When the wedge type is used for transmission, the beam is inclined by about 0.5 degrees.
  • * CaF2 scratches easily and cannot be wiped with paper.
  • * Use an air blower to remove dust and dirt.
  • * If CaF2 or MgF2 is left in a high humidity environment for a long time, the surface will become rough.
  • * When not in use, store in an environment with low humidity such as auto dry.

Spec

  • [ common specification]
  • Material: Synthetic quartz for ultraviolet CaF 2 MgF 2
  • Surface roughness: ＜0.2nm (Ra)
  • Effective diameter: 90% of the outer diameter
  • [Individual specification]
  • Type: Parallel flat surface
  • Outer diameter φD: φ30mm
  • Thickness t: 5mm
  • Material: CaF2
  • Surface accuracy: λ/10
  • Parallelism: ＜5″
  • Scratch - dig: 20?10
  • RoHS conform product
  •  
Order No.Order No.ss="init"> 61-6938-10 Low Scattering Opticφ30mm Thickness 5mm Surface Flatness λ/10　OPCFSP-30C05-10-5 【AXEL GLOBAL】ASONE

AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
SIGMAKOKI CO., LTD.

61-6938-10　Low Scattering Opticφ30mm Thickness 5mm Surface Flatness λ/10　OPCFSP-30C05-10-5

Features

  • Surface roughness was reduced to 0.2 nm (Ra) or less by special polishing of parallel planar substrates.
  • It can be used as a substrate for high-power laser mirrors and X-ray mirrors, where the influence of substrate scattering is concerned.
  • Use the wedge type when you are concerned about the effect of backside reflection such as a beam splitter.
  • CaF2 (calcium fluoride) and MgF2 (magnesium fluoride) have high permeability in the ultraviolet and infrared regions.
  • It is a nearly ideal substrate that is machined with high surface roughness (micro irregularities) and high surface accuracy (flatness of the entire surface).
  • * Both sides of the low scattering substrate are not coated.
  • * The surface of the glass reflects 2.5% to 4%.
  • * When the wedge type is used for transmission, the beam is inclined by about 0.5 degrees.
  • * CaF2 scratches easily and cannot be wiped with paper.
  • * Use an air blower to remove dust and dirt.
  • * If CaF2 or MgF2 is left in a high humidity environment for a long time, the surface will become rough.
  • * When not in use, store in an environment with low humidity such as auto dry.

Spec

  • [ common specification]
  • Material: Synthetic quartz for ultraviolet CaF 2 MgF 2
  • Surface roughness: ＜0.2nm (Ra)
  • Effective diameter: 90% of the outer diameter
  • [Individual specification]
  • Type: Parallel flat surface
  • Outer diameter φD: φ30mm
  • Thickness t: 5mm
  • Material: CaF2
  • Surface accuracy: λ/10
  • Parallelism: ＜5″
  • Scratch - dig: 20?10
  • RoHS conform product
  •  
Order No. 61-6938-10
Model No. OPCFSP-30C05-10-5
Standard price JPY: 58,300 USD: 365.70
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity 1piece
Stock in Japan
Supplier Stock

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
61-6938-05 Low Scattering Optic φ25.4mm Thickness 5mm Surface Flatness λ/10　OPSQSP-25.4C05-10-5 OPSQSP-25.4C05-10-5 1piece JPY: 27,500 USD: 172.50

61-6938-06 Low Scattering Opticφ30mm Thickness 3mm Surface Flatness λ/10　OPSQSP-30C03-10-5 OPSQSP-30C03-10-5 1piece JPY: 30,800 USD: 193.20

61-6938-07 Low Scattering Opticφ30mm Thickness 5mm Surface Flatness λ/10　OPSQSP-30C05-10-5 OPSQSP-30C05-10-5 1piece JPY: 33,000 USD: 207.00

61-6938-08 Low Scattering Opticφ50mm Thickness 5mm Surface Flatness λ/10　OPSQSP-50C05-10-5 OPSQSP-50C05-10-5 1piece JPY: 55,000 USD: 345.00

61-6938-09 Low Scattering Opticφ25.4mm Thickness 5mm Surface Flatness λ/10　OPCFSP-25.4C05-10-5 OPCFSP-25.4C05-10-5 1piece JPY: 52,800 USD: 331.20

61-6938-10 Low Scattering Opticφ30mm Thickness 5mm Surface Flatness λ/10　OPCFSP-30C05-10-5 OPCFSP-30C05-10-5 1piece JPY: 58,300 USD: 365.70

61-6938-11 Low Scattering Opticφ25.4mm Thickness 5mm Surface Flatness λ/10　OPMFSP-25.4C05-10-5 OPMFSP-25.4C05-10-5 1piece JPY: 77,000 USD: 483.00

61-6938-12 Low Scattering Opticφ30mm Thickness 5mm Surface Flatness λ/10　OPMFSP-30C05-10-5 OPMFSP-30C05-10-5 1piece JPY: 88,000 USD: 552.00

61-6938-13 Low Scattering (Wedge) φ30mm Thickness 5mm Surface Flatness λ/10　WSSQSP-30C05-10-1 WSSQSP-30C05-10-1 1piece JPY: 44,000 USD: 276.00

61-6938-14 Low Scattering (Wedge) φ50mm Thickness 8mm Surface Flatness λ/10　WSSQSP-50C08-10-1 WSSQSP-50C08-10-1 1piece JPY: 95,700 USD: 600.30

61-6938-15 Low Scattering (Wedge) φ30mm Thickness 5mm Surface Flatness λ/10　WSCFSP-30C05-10-1 WSCFSP-30C05-10-1 1piece JPY: 68,200 USD: 427.80

61-6938-16 Low Scattering (Wedge) φ30mm Thickness 5mm Surface Flatness λ/10　WSMFSP-30C05-10-1 WSMFSP-30C05-10-1 1piece JPY: 101,200 USD: 634.80

This page is the page of Low Scattering Opticφ30mm Thickness 5mm Surface Flatness λ/10 sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.