61-6938-06 Low Scattering Opticφ30mm Thickness 3mm Surface Flatness λ/10 OPSQSP-30C03-10-5
Features
- Surface roughness was reduced to 0.2 nm (Ra) or less by special polishing of parallel planar substrates.
- It can be used as a substrate for high-power laser mirrors and X-ray mirrors, where the influence of substrate scattering is concerned.
- Use the wedge type when you are concerned about the effect of backside reflection such as a beam splitter.
- CaF2 (calcium fluoride) and MgF2 (magnesium fluoride) have high permeability in the ultraviolet and infrared regions.
- It is a nearly ideal substrate that is machined with high surface roughness (micro irregularities) and high surface accuracy (flatness of the entire surface).
- * Both sides of the low scattering substrate are not coated.
- * The surface of the glass reflects 2.5% to 4%.
- * When the wedge type is used for transmission, the beam is inclined by about 0.5 degrees.
- * CaF2 scratches easily and cannot be wiped with paper.
- * Use an air blower to remove dust and dirt.
- * If CaF2 or MgF2 is left in a high humidity environment for a long time, the surface will become rough.
- * When not in use, store in an environment with low humidity such as auto dry.
Spec
- [
common specification] - Material: Synthetic quartz for ultraviolet CaF 2 MgF 2
- Surface roughness: ＜0.2nm (Ra)
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Type: Parallel flat surface
- Outer diameter φD: φ30mm
- Thickness t: 3mm
- Material: Synthetic quartz
- Surface accuracy: λ/10
- Parallelism: ＜5″
- Scratch - dig: 10?5
- RoHS conform product
| Order No. | 61-6938-06 | |
|---|---|---|
| Model No. | OPSQSP-30C03-10-5 | |
| Standard price |
JPY: 30,800
USD: 193.07
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
61-6938-05 | Low Scattering Optic φ25.4mm Thickness 5mm Surface Flatness λ/10 OPSQSP-25.4C05-10-5 | OPSQSP-25.4C05-10-5 | 1piece | JPY: 27,500 | USD: 172.38 |
|
|
 |
61-6938-06 | Low Scattering Opticφ30mm Thickness 3mm Surface Flatness λ/10 OPSQSP-30C03-10-5 | OPSQSP-30C03-10-5 | 1piece | JPY: 30,800 | USD: 193.07 |
|
|
 |
61-6938-07 | Low Scattering Opticφ30mm Thickness 5mm Surface Flatness λ/10 OPSQSP-30C05-10-5 | OPSQSP-30C05-10-5 | 1piece | JPY: 33,000 | USD: 206.86 |
|
|
 |
61-6938-08 | Low Scattering Opticφ50mm Thickness 5mm Surface Flatness λ/10 OPSQSP-50C05-10-5 | OPSQSP-50C05-10-5 | 1piece | JPY: 55,000 | USD: 344.76 |
|
|
 |
61-6938-09 | Low Scattering Opticφ25.4mm Thickness 5mm Surface Flatness λ/10 OPCFSP-25.4C05-10-5 | OPCFSP-25.4C05-10-5 | 1piece | JPY: 52,800 | USD: 330.97 |
|
|
 |
61-6938-10 | Low Scattering Opticφ30mm Thickness 5mm Surface Flatness λ/10 OPCFSP-30C05-10-5 | OPCFSP-30C05-10-5 | 1piece | JPY: 58,300 | USD: 365.45 |
|
|
 |
61-6938-11 | Low Scattering Opticφ25.4mm Thickness 5mm Surface Flatness λ/10 OPMFSP-25.4C05-10-5 | OPMFSP-25.4C05-10-5 | 1piece | JPY: 77,000 | USD: 482.67 |
|
|
 |
61-6938-12 | Low Scattering Opticφ30mm Thickness 5mm Surface Flatness λ/10 OPMFSP-30C05-10-5 | OPMFSP-30C05-10-5 | 1piece | JPY: 88,000 | USD: 551.62 |
|
|
 |
61-6938-13 | Low Scattering (Wedge) φ30mm Thickness 5mm Surface Flatness λ/10 WSSQSP-30C05-10-1 | WSSQSP-30C05-10-1 | 1piece | JPY: 44,000 | USD: 275.81 |
|
|
 |
61-6938-14 | Low Scattering (Wedge) φ50mm Thickness 8mm Surface Flatness λ/10 WSSQSP-50C08-10-1 | WSSQSP-50C08-10-1 | 1piece | JPY: 95,700 | USD: 599.89 |
|
|
 |
61-6938-15 | Low Scattering (Wedge) φ30mm Thickness 5mm Surface Flatness λ/10 WSCFSP-30C05-10-1 | WSCFSP-30C05-10-1 | 1piece | JPY: 68,200 | USD: 427.51 |
|
|
 |
61-6938-16 | Low Scattering (Wedge) φ30mm Thickness 5mm Surface Flatness λ/10 WSMFSP-30C05-10-1 | WSMFSP-30C05-10-1 | 1piece | JPY: 101,200 | USD: 634.36 |
|