61-6929-33 45 °Knife Edge Coated Right Angle Prism 20mm KRPB4-20-550
特徴
- This is a prism with a sharp finish of the right edge sandwiching the bottom of two sides by polishing.
- Since the right-angled ridge is not chamfered, the line of the right-angled ridge becomes very thin when peeking from the slope side, and you can observe the natural reflection image without any seam.
- The width of the right-angled ridge is so narrow and straight that it can be used as a reference line in an observation system.
- Total reflection at the critical angle is obtained when using light with an incident angle of 0±5.7 degrees for the slope.
- * The knife edge of the right-angled ridge is very easy to chip, so please handle it carefully so that it does not come into contact with anything else.
- * The knife edge cannot be wiped with lens paper.
- * Use an air blower to blow out the garbage before use.
- * Since the measured A dimension includes a chamfer, it is slightly shorter.
- * The tolerance is defined by the sides of the triangle formed by the slope and the two bases.
- * Reflectivity above the critical angle is about 100% reflection, but there is a loss of about 8% due to reflection of the entrance/exit face of the prism.
- * Fingerprints or dirt on the uncoated surface may prevent total reflection even if the angle is higher than a critical angle.
- * Do not let the no-coat surface come in contact with anything.
仕様
- [
common specification] - Material: BK7 (refractive index n d=1.517)
- Edge processing: Straight angle edge division: Knife edges (chamfer none), Edge in other: C chamfer
- Coating: 2 faces sandwiching the straight angle: Al + MgF 2 (protection film), Slope: No coat
- Laser durability: 0.25J/cm2 (pulse width 10ns, Repeat frequency 20Hz)
- Effective range: Circle or ellipse inscribed to 90% of the length of the sides
- [Individual specification]
- A＝B: 20mm
- Base material surface accuracy: λ/4
- Angle degrees accuracy (90°): ±1′
- Angle degrees accuracy (45°): ±1′
- Scratch - dig: 40?20
- RoHS conform product
| アズワン品番 | 61-6929-33 | |
|---|---|---|
| 型番 | KRPB4-20-550 | |
| 標準価格 |
JPY: 22,400
USD: 140.41
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
 |
61-6929-21 | 45°Knife Edge Right Angle Prism 10mm Base Material Surface Flatness λ/4 KRPB-10-4M | KRPB-10-4M | 1piece | JPY: 7,800 | USD: 48.89 |
|
|
 |
61-6929-22 | 45°Knife Edge Right Angle Prism 15mm Base Material Surface Flatness λ/4 KRPB-15-4M | KRPB-15-4M | 1piece | JPY: 12,500 | USD: 78.36 |
|
|
 |
61-6929-23 | 45°Knife Edge Right Angle Prism 20mm Base Material Surface Flatness λ/4 KRPB-20-4M | KRPB-20-4M | 1piece | JPY: 19,800 | USD: 124.12 |
|
|
 |
61-6929-24 | 45°Knife Edge Right Angle Prism 25mm Base Material Surface Flatness λ/4 KRPB-25-4M | KRPB-25-4M | 1piece | JPY: 26,100 | USD: 163.61 |
|
|
 |
61-6929-25 | 45°Knife Edge Right Angle Prism 30mm Base Material Surface Flatness λ/4 KRPB-30-4M | KRPB-30-4M | 1piece | JPY: 37,600 | USD: 235.69 |
|
|
 |
61-6929-26 | 45°Knife Edge Right Angle Prism 10mm Base Material Surface Flatness λ/10 KRPB-10-10H | KRPB-10-10H | 1piece | JPY: 12,500 | USD: 78.36 |
|
|
 |
61-6929-27 | 45°Knife Edge Right Angle Prism 15mm Base Material Surface Flatness λ/10 KRPB-15-10H | KRPB-15-10H | 1piece | JPY: 18,800 | USD: 117.85 |
|
|
 |
61-6929-28 | 45°Knife Edge Right Angle Prism 20mm Base Material Surface Flatness λ/10 KRPB-20-10H | KRPB-20-10H | 1piece | JPY: 31,300 | USD: 196.20 |
|
|
 |
61-6929-29 | 45°Knife Edge Right Angle Prism 25mm Base Material Surface Flatness λ/10 KRPB-25-10H | KRPB-25-10H | 1piece | JPY: 40,700 | USD: 255.12 |
|
|
 |
61-6929-30 | 45°Knife Edge Right Angle Prism 30mm Base Material Surface Flatness λ/10 KRPB-30-10H | KRPB-30-10H | 1piece | JPY: 47,000 | USD: 294.62 |
|
|
 |
61-6929-31 | 45 °Knife Edge Coated Right Angle Prism 10mm KRPB4-10-550 | KRPB4-10-550 | 1piece | JPY: 10,400 | USD: 65.19 |
|
|
 |
61-6929-32 | 45 °Knife Edge Coated Right Angle Prism 15mm KRPB4-15-550 | KRPB4-15-550 | 1piece | JPY: 15,100 | USD: 94.65 |
|
|
 |
61-6929-33 | 45 °Knife Edge Coated Right Angle Prism 20mm KRPB4-20-550 | KRPB4-20-550 | 1piece | JPY: 22,400 | USD: 140.41 |
|
|
 |
61-6929-34 | 45 °Knife Edge Coated Right Angle Prism 25mm KRPB4-25-550 | KRPB4-25-550 | 1piece | JPY: 29,200 | USD: 183.04 |
|
|
 |
61-6929-35 | 45 °Knife Edge Coated Right Angle Prism 30mm KRPB4-30-550 | KRPB4-30-550 | 1piece | JPY: 40,700 | USD: 255.12 |
|