61-6885-66 Glan Laser Prism 300-700nm 15 x 25mm GLPB2-06-25SN-3/7
Features
- Polarizer with higher laser resistance for high-power lasers and high-energy pulsed lasers.
- The transmission loss is low, and a high extinction ratio of 5×10^-5 or less can be obtained.
- Calcite type for use in the visible to infrared region and α-BBO crystal type for use in the ultraviolet region are available.
- The two prisms are joined with a slight gap (air gap).
- This does not cause absorption by the adhesive or decrease in laser resistance.
- The Gran laser prism is enclosed in a metal frame.
- Polarization components that do not pass through the prism pass through the ports (holes) of the metal frame and out of the frame.
- Since there are two ports, you can use them even if you change the input/output direction.
- The surface of the Gran laser prism is coated with a single layer of anti-reflection film to provide high transmittance.
- We also have the Granthomson Prism GTPB/GTPC and the Wollaston Prism WPPB/WPPC with wide tolerance angles.
- Please check the allowable angle if necessary.
- * When the incident angle changes, the extinction ratio of the linearly polarized light of the transmitted light also changes.
- * Since calcite is a natural crystal, there are variations in the quality and individual differences.
Spec
- [
common specification] - Material: α-BBO, Calcite
- Beam polarization angle: ＜3′
- Wavefront accuracy: λ/4
- Coating: MgF 2 single layer reflective prevention coat
- Laser durability: 2J/cm2 (pulse width 10ns)
- Scratch - dig: 20-10
- Protection frame material: Aluminum (surface treatment: Black anodic oxide)
- [Individual specification]
- Adaptive wavelength: 300 - 700nm
- Extinction ratio: ＜5 x 10＾-6
- φA: φ6mm
- φD x L: 15 x 25mm
- RoHS conform product
| Order No. | 61-6885-66 | |
|---|---|---|
| Model No. | GLPB2-06-25SN-3/7 | |
| Standard price |
JPY: 66,000
USD: 413.72
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|