61-6877-07 Beam Sampler φ25.4mm Thickness 3mm BS4-25.4C03-10-550
Features
- To monitor the intensity of a laser or to observe light in a part of an optical system, a beam sampler is inserted into the optical path and only 5% of the incident light is taken out of the optical path.
- Anti-reflection coating on the back side prevents stray light on the back side.
- There are two types: a parallel plane type, in which the beam does not refract, and a wedge type, in which ghosts and interference due to backside reflections are less affected.
- The reflectivity of the coated surface has a small wavelength variation and can be accurately determined from the refractive index of the substrate.
- The wedge type has an arrow pointing toward the surface at the thickest point.
- * Due to the effect of the refractive index and thickness of the substrate, the optical path of the transmitted light is translated by several millimeters relative to the incident light. (In the case of the wedge type, the beam polarization angle of about 30 minutes is added to the translation of the optical path.) * * The transmittance wavelength characteristic changes when used at an incident angle other than 45 degrees. (Refer to the graph of the reflectivity change with respect to the incident angle.) * * The arrow on the side of the substrate indicates the side of the uncoated surface (reflective surface).
- * When using a linearly polarized light source such as a laser, the reflectivity varies between 0.9~9.6% depending on the polarization direction. (Refer to the Reflectance Wavelength Characteristic Graph) * * If there is dirt on the reflective surface, the reflectivity may change significantly.
- * Although the camera can be used for infrared and ultraviolet light, the anti-reflection film on the back may not be effective.
- * The phase difference of the incident light is not stored in transmitted light or reflected light.
SpecSpec class="init">
61-6877-07 Beam Sampler φ25.4mm Thickness 3mm BS4-25.4C03-10-550 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6877-07 Beam Sampler φ25.4mm Thickness 3mm BS4-25.4C03-10-550
特徴
- To monitor the intensity of a laser or to observe light in a part of an optical system, a beam sampler is inserted into the optical path and only 5% of the incident light is taken out of the optical path.
- Anti-reflection coating on the back side prevents stray light on the back side.
- There are two types: a parallel plane type, in which the beam does not refract, and a wedge type, in which ghosts and interference due to backside reflections are less affected.
- The reflectivity of the coated surface has a small wavelength variation and can be accurately determined from the refractive index of the substrate.
- The wedge type has an arrow pointing toward the surface at the thickest point.
- * Due to the effect of the refractive index and thickness of the substrate, the optical path of the transmitted light is translated by several millimeters relative to the incident light. (In the case of the wedge type, the beam polarization angle of about 30 minutes is added to the translation of the optical path.) * * The transmittance wavelength characteristic changes when used at an incident angle other than 45 degrees. (Refer to the graph of the reflectivity change with respect to the incident angle.) * * The arrow on the side of the substrate indicates the side of the uncoated surface (reflective surface).
- * When using a linearly polarized light source such as a laser, the reflectivity varies between 0.9~9.6% depending on the polarization direction. (Refer to the Reflectance Wavelength Characteristic Graph) * * If there is dirt on the reflective surface, the reflectivity may change significantly.
- * Although the camera can be used for infrared and ultraviolet light, the anti-reflection film on the back may not be effective.
- * The phase difference of the incident light is not stored in transmitted light or reflected light.
仕様
- [
common specification]
- Material: BK7
- Substrate surface accuracy: λ/10
- Coating: Surface no coat, Back visible zone reflective prevention film
- Incident angle: 45°
- Branching ratio (reflection: Transmission): 5: 95 (average value of P polarized light and S polarized light)
- Laser durability: 4J/cm2 (pulse width 4ns, Repeat frequency 20Hz)
- Scratch - dig: 10-5
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Adaptive wavelength: 400 - 700nm
- Outer diameter φD: φ25.4mm
- Thickness t: 3mm
- Parallelism: ＜5″
- RoHS conform product
-
Order No.
61-6877-07
Model No.
BS4-25.4C03-10-550
Standard price
JPY: 11,000
USD: 68.95
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6877-07
Beam Sampler φ25.4mm Thickness 3mm BS4-25.4C03-10-550
BS4-25.4C03-10-550
1piece
JPY: 11,000
USD: 68.95
61-6877-08
Beam Sampler φ30mm Thickness 3mm BS4-30C03-10-550
BS4-30C03-10-550
1piece
JPY: 12,500
USD: 78.36
61-6877-09
Beam Sampler φ30mm Thickness 5mm BS4-30C05-10W-550
BS4-30C05-10W-550
1piece
JPY: 12,500
USD: 78.36
61-6877-10
Beam Sampler φ50mm Thickness 5mm BS4-50C05-10-550
BS4-50C05-10-550
1piece
JPY: 24,000
USD: 150.44
61-6877-11
Beam Sampler φ50mm Thickness 8mm BS4-50C08-10W-550
BS4-50C08-10W-550
1piece
JPY: 24,000
USD: 150.44
Related Products
1 / 1 ページ
61-6877-07 Beam Sampler φ25.4mm Thickness 3mm BS4-25.4C03-10-550
特徴
- To monitor the intensity of a laser or to observe light in a part of an optical system, a beam sampler is inserted into the optical path and only 5% of the incident light is taken out of the optical path.
- Anti-reflection coating on the back side prevents stray light on the back side.
- There are two types: a parallel plane type, in which the beam does not refract, and a wedge type, in which ghosts and interference due to backside reflections are less affected.
- The reflectivity of the coated surface has a small wavelength variation and can be accurately determined from the refractive index of the substrate.
- The wedge type has an arrow pointing toward the surface at the thickest point.
- * Due to the effect of the refractive index and thickness of the substrate, the optical path of the transmitted light is translated by several millimeters relative to the incident light. (In the case of the wedge type, the beam polarization angle of about 30 minutes is added to the translation of the optical path.) * * The transmittance wavelength characteristic changes when used at an incident angle other than 45 degrees. (Refer to the graph of the reflectivity change with respect to the incident angle.) * * The arrow on the side of the substrate indicates the side of the uncoated surface (reflective surface).
- * When using a linearly polarized light source such as a laser, the reflectivity varies between 0.9~9.6% depending on the polarization direction. (Refer to the Reflectance Wavelength Characteristic Graph) * * If there is dirt on the reflective surface, the reflectivity may change significantly.
- * Although the camera can be used for infrared and ultraviolet light, the anti-reflection film on the back may not be effective.
- * The phase difference of the incident light is not stored in transmitted light or reflected light.
仕様
- [
common specification] - Material: BK7
- Substrate surface accuracy: λ/10
- Coating: Surface no coat, Back visible zone reflective prevention film
- Incident angle: 45°
- Branching ratio (reflection: Transmission): 5: 95 (average value of P polarized light and S polarized light)
- Laser durability: 4J/cm2 (pulse width 4ns, Repeat frequency 20Hz)
- Scratch - dig: 10-5
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Adaptive wavelength: 400 - 700nm
- Outer diameter φD: φ25.4mm
- Thickness t: 3mm
- Parallelism: ＜5″
- RoHS conform product
| Order No. | 61-6877-07 | |
|---|---|---|
| Model No. | BS4-25.4C03-10-550 | |
| Standard price |
JPY: 11,000
USD: 68.95
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
61-6877-07 | Beam Sampler φ25.4mm Thickness 3mm BS4-25.4C03-10-550 | BS4-25.4C03-10-550 | 1piece | JPY: 11,000 | USD: 68.95 |
|
|
|
61-6877-08 | Beam Sampler φ30mm Thickness 3mm BS4-30C03-10-550 | BS4-30C03-10-550 | 1piece | JPY: 12,500 | USD: 78.36 |
|
|
|
61-6877-09 | Beam Sampler φ30mm Thickness 5mm BS4-30C05-10W-550 | BS4-30C05-10W-550 | 1piece | JPY: 12,500 | USD: 78.36 |
|
|
|
61-6877-10 | Beam Sampler φ50mm Thickness 5mm BS4-50C05-10-550 | BS4-50C05-10-550 | 1piece | JPY: 24,000 | USD: 150.44 |
|
|
|
61-6877-11 | Beam Sampler φ50mm Thickness 8mm BS4-50C08-10W-550 | BS4-50C08-10W-550 | 1piece | JPY: 24,000 | USD: 150.44 |
|
Related Products
1 / 1 ページ
