61-6871-80 Laser Line Mirror Narrowband For 0 °-45 ° 405nm φ25.4mm TFVM-25.4C05-405
FeaturesFeatures class="init">
61-6871-80 Laser Line Mirror Narrowband For 0 °-45 ° 405nm φ25.4mm TFVM-25.4C05-405 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6871-80 Laser Line Mirror Narrowband For 0 °-45 ° 405nm φ25.4mm TFVM-25.4C05-405
特徴
- Use a 0°-45° dielectric mirror when using a mirror at an incidence angle of 45° or less, such as a Michelson interferometer or an optical system that shuttles light between two mirrors.
- When the angle of incidence is used at 0° or at 45°, the mirror can be used in common and high reflectivity can be obtained.
- Very high reflectivity is obtained between 0° and 45° angle of incidence.
- If the incident angle is fixed, it can be used as a wideband mirror.
- Since there is no absorption in the film, there is little change over time and it can withstand continuous laser irradiation.
- We also have a Surface Accuracy Guarantee Mirror (HTFM) that guarantees surface accuracy after coating.
- * Reflectance wavelength characteristics of dielectric multilayer films vary depending on the polarization state of the incident beam.
- * P-polarized light has a lower reflectivity and a narrower reflection band than S-polarized light.
- Reflectance may be low when the watch is used at wavelengths other than those indicated.
- * When the angle of incidence is set, the reflectance wavelength characteristic also depends on the polarization azimuth.
- * Reflectivity characteristics at an incidence angle of 45° are expressed as the average values of the reflectivity of P-polarized light and S-polarized light.
Spec
- [<(for 0° - 45° incidence dielectric multilayer plane mirror> common specification]
- Material: BK7
- Coating: Dielectric multi-layered film
- Incident angle: 0° - 45°
- Substrate surface accuracy: λ/10
- Parallelism: ＜3′
- Scratch - dig: 10?5
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Adaptive wavelength: 405nm
- Outer diameter φD: φ25.4mm
- Thickness t: 5mm
- Reflective ratio: ＞99％
- Laser durability *: 0.5J/cm2
- Back: Polished surface
- *Laser pulse width 10ns, Repeat frequency 20Hz
- RoHS conform product
-
アズワン品番
61-6871-80
型番
TFVM-25.4C05-405
標準価格
JPY: 13,700
USD: 85.94
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
61-6871-80 Laser Line Mirror Narrowband For 0 °-45 ° 405nm φ25.4mm TFVM-25.4C05-405
特徴
- Use a 0°-45° dielectric mirror when using a mirror at an incidence angle of 45° or less, such as a Michelson interferometer or an optical system that shuttles light between two mirrors.
- When the angle of incidence is used at 0° or at 45°, the mirror can be used in common and high reflectivity can be obtained.
- Very high reflectivity is obtained between 0° and 45° angle of incidence.
- If the incident angle is fixed, it can be used as a wideband mirror.
- Since there is no absorption in the film, there is little change over time and it can withstand continuous laser irradiation.
- We also have a Surface Accuracy Guarantee Mirror (HTFM) that guarantees surface accuracy after coating.
- * Reflectance wavelength characteristics of dielectric multilayer films vary depending on the polarization state of the incident beam.
- * P-polarized light has a lower reflectivity and a narrower reflection band than S-polarized light.
- Reflectance may be low when the watch is used at wavelengths other than those indicated.
- * When the angle of incidence is set, the reflectance wavelength characteristic also depends on the polarization azimuth.
- * Reflectivity characteristics at an incidence angle of 45° are expressed as the average values of the reflectivity of P-polarized light and S-polarized light.
Spec
- [<(for 0° - 45° incidence dielectric multilayer plane mirror> common specification]
- Material: BK7
- Coating: Dielectric multi-layered film
- Incident angle: 0° - 45°
- Substrate surface accuracy: λ/10
- Parallelism: ＜3′
- Scratch - dig: 10?5
- Effective diameter: 90% of the outer diameter
- [Individual specification]
- Adaptive wavelength: 405nm
- Outer diameter φD: φ25.4mm
- Thickness t: 5mm
- Reflective ratio: ＞99％
- Laser durability *: 0.5J/cm2
- Back: Polished surface
- *Laser pulse width 10ns, Repeat frequency 20Hz
- RoHS conform product
| アズワン品番 | 61-6871-80 | |
|---|---|---|
| 型番 | TFVM-25.4C05-405 | |
| 標準価格 |
JPY: 13,700
USD: 85.94
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|