61-4786-07 ［Discontinued］Aqua Drill EX Flat 8.4 MM AQDEXZ0840
Features
- Drill for counterbore with good drilling performance.
- Ideal for sloping surfaces and tap hole machining.
- The coating may be uneven in color, but there is no problem with performance.
- * Use of stainless steel (SUS304, etc.) is limited to a diameter of 1.99 mm or less. AQDEXZOH3D (internal oil supply) is recommended for 2.0 mm or more.
- * L1 is the back taper range.
- * Drilling up to 3D is possible, but be careful not to discharge chips by performing step processing.
SpecSpec class="init">
［Discontinued］Aqua Drill EX Flat 8.4 MM AQDEXZ0840 61-4786-07 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NACHI
61-4786-07 ［Discontinued］Aqua Drill EX Flat 8.4 MM AQDEXZ0840
特徴
- Drill for counterbore with good drilling performance.
- Ideal for sloping surfaces and tap hole machining.
- The coating may be uneven in color, but there is no problem with performance.
- * Use of stainless steel (SUS304, etc.) is limited to a diameter of 1.99 mm or less. AQDEXZOH3D (internal oil supply) is recommended for 2.0 mm or more.
- * L1 is the back taper range.
- * Drilling up to 3D is possible, but be careful not to discharge chips by performing step processing.
仕様
- Tool Material - carbide
- Coating: AQEX
- Tip angle (°): 180
- Helix Angle (°): 20
- body (L1; mm): 42
- Diameter Tolerance (μm): 0 to -15
- Shank diameter tolerance (μm): 0 to -9
- Total length (mm): 80
- Shank diameter (mm): 8
- Blade diameter (mm): 8.4
- Groove Length (mm): 39
-
Order No.Order No.ss="init">
［Discontinued］Aqua Drill EX Flat 8.4 MM AQDEXZ0840 61-4786-07 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NACHI
61-4786-07 ［Discontinued］Aqua Drill EX Flat 8.4 MM AQDEXZ0840
特徴
- Drill for counterbore with good drilling performance.
- Ideal for sloping surfaces and tap hole machining.
- The coating may be uneven in color, but there is no problem with performance.
- * Use of stainless steel (SUS304, etc.) is limited to a diameter of 1.99 mm or less. AQDEXZOH3D (internal oil supply) is recommended for 2.0 mm or more.
- * L1 is the back taper range.
- * Drilling up to 3D is possible, but be careful not to discharge chips by performing step processing.
仕様
- Tool Material - carbide
- Coating: AQEX
- Tip angle (°): 180
- Helix Angle (°): 20
- body (L1; mm): 42
- Diameter Tolerance (μm): 0 to -15
- Shank diameter tolerance (μm): 0 to -9
- Total length (mm): 80
- Shank diameter (mm): 8
- Blade diameter (mm): 8.4
- Groove Length (mm): 39
-
アズワン品番
61-4786-07
Model No.
AQDEXZ0840
JANコード
2002003320848
Standard price
JPY: 15,400
USD: 95.82
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
-
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-4785-83
［Discontinued］Aqua Drill EX Flat 6.1 MM AQDEXZ0610
AQDEXZ0610
1piece
JPY: 12,600
USD: 78.40
-
61-4785-84
［Discontinued］Aqua Drill EX Flat 6.2 MM AQDEXZ0620
AQDEXZ0620
1piece
JPY: 12,600
USD: 78.40
-
61-4785-85
［Discontinued］Aqua Drill EX Flat 6.3 MM AQDEXZ0630
AQDEXZ0630
1piece
JPY: 12,600
USD: 78.40
-
61-4785-86
［Discontinued］Aqua Drill EX Flat 6.4 MM AQDEXZ0640
AQDEXZ0640
1piece
JPY: 12,600
USD: 78.40
-
61-4785-87
［Discontinued］Aqua Drill EX Flat 6.5 MM AQDEXZ0650
AQDEXZ0650
1piece
JPY: 12,600
USD: 78.40
-
61-4785-88
［Discontinued］Aqua Drill EX Flat 6.6 MM AQDEXZ0660
AQDEXZ0660
1piece
JPY: 12,800
USD: 79.64
-
61-4785-89
［Discontinued］Aqua Drill EX Flat 6.7 MM AQDEXZ0670
AQDEXZ0670
1piece
JPY: 12,800
USD: 79.64
-
61-4785-90
［Discontinued］Aqua Drill EX Flat 6.8 MM AQDEXZ0680
AQDEXZ0680
1piece
JPY: 12,800
USD: 79.64
-
61-4785-91
［Discontinued］Aqua Drill EX Flat 6.9 MM AQDEXZ0690
AQDEXZ0690
1piece
JPY: 12,800
USD: 79.64
-
61-4785-92
［Discontinued］Aqua Drill EX Flat 7.0 MM AQDEXZ0700
AQDEXZ0700
1piece
JPY: 12,800
USD: 79.64
-
61-4785-93
［Discontinued］Aqua Drill EX Flat 7.1 MM AQDEXZ0710
AQDEXZ0710
1piece
JPY: 14,000
USD: 87.11
-
61-4785-94
［Discontinued］Aqua Drill EX Flat 7.2 MM AQDEXZ0720
AQDEXZ0720
1piece
JPY: 14,000
USD: 87.11
-
61-4785-95
［Discontinued］Aqua Drill EX Flat 7.3 MM AQDEXZ0730
AQDEXZ0730
1piece
JPY: 14,000
USD: 87.11
-
61-4785-96
［Discontinued］Aqua Drill EX Flat 7.4 MM AQDEXZ0740
AQDEXZ0740
1piece
JPY: 14,000
USD: 87.11
-
61-4785-97
［Discontinued］Aqua Drill EX Flat 7.5 MM AQDEXZ0750
AQDEXZ0750
1piece
JPY: 14,000
USD: 87.11
-
61-4785-98
［Discontinued］Aqua Drill EX Flat 7.6 MM AQDEXZ0760
AQDEXZ0760
1piece
JPY: 14,000
USD: 87.11
-
61-4785-99
［Discontinued］Aqua Drill EX Flat 7.7 MM AQDEXZ0770
AQDEXZ0770
1piece
JPY: 14,000
USD: 87.11
-
61-4786-01
［Discontinued］Aqua Drill EX Flat 7.8 MM AQDEXZ0780
AQDEXZ0780
1piece
JPY: 14,000
USD: 87.11
-
61-4786-02
［Discontinued］Aqua Drill EX Flat 7.9 MM AQDEXZ0790
AQDEXZ0790
1piece
JPY: 14,000
USD: 87.11
-
61-4786-03
［Discontinued］Aqua Drill EX Flat 8.0 MM AQDEXZ0800
AQDEXZ0800
1piece
JPY: 13,500
USD: 84.00
-
61-4786-04
［Discontinued］Aqua Drill EX Flat 8.1 MM AQDEXZ0810
AQDEXZ0810
1piece
JPY: 15,400
USD: 95.82
-
61-4786-05
［Discontinued］Aqua Drill EX Flat 8.2 MM AQDEXZ0820
AQDEXZ0820
1piece
JPY: 15,400
USD: 95.82
-
61-4786-06
［Discontinued］Aqua Drill EX Flat 8.3 MM AQDEXZ0830
AQDEXZ0830
1piece
JPY: 15,400
USD: 95.82
-
61-4786-07
［Discontinued］Aqua Drill EX Flat 8.4 MM AQDEXZ0840
AQDEXZ0840
1piece
JPY: 15,400
USD: 95.82
-
61-4786-08
［Discontinued］Aqua Drill EX Flat 8.5 MM AQDEXZ0850
AQDEXZ0850
1piece
JPY: 15,400
USD: 95.82
-
61-4786-09
［Discontinued］Aqua Drill EX Flat 8.6 MM AQDEXZ0860
AQDEXZ0860
1piece
JPY: 15,500
USD: 96.44
-
61-4786-10
［Discontinued］Aqua Drill EX Flat 8.7 MM AQDEXZ0870
AQDEXZ0870
1piece
JPY: 15,500
USD: 96.44
-
61-4786-11
［Discontinued］Aqua Drill EX Flat 8.8 MM AQDEXZ0880
AQDEXZ0880
1piece
JPY: 15,500
USD: 96.44
-
61-4786-12
［Discontinued］Aqua Drill EX Flat 8.9 MM AQDEXZ0890
AQDEXZ0890
1piece
JPY: 15,500
USD: 96.44
-
61-4786-13
［Discontinued］Aqua Drill EX Flat 9.0 MM AQDEXZ0900
AQDEXZ0900
1piece
JPY: 15,500
USD: 96.44
-
61-4786-14
［Discontinued］Aqua Drill EX Flat 9.1 MM AQDEXZ0910
AQDEXZ0910
1piece
JPY: 17,200
USD: 107.02
-
61-4786-15
［Discontinued］Aqua Drill EX Flat 9.2 MM AQDEXZ0920
AQDEXZ0920
1piece
JPY: 17,200
USD: 107.02
-
61-4786-16
［Discontinued］Aqua Drill EX Flat 9.3 MM AQDEXZ0930
AQDEXZ0930
1piece
JPY: 17,200
USD: 107.02
-
61-4786-17
［Discontinued］Aqua Drill EX Flat 9.4 MM AQDEXZ0940
AQDEXZ0940
1piece
JPY: 17,200
USD: 107.02
-
61-4786-18
［Discontinued］Aqua Drill EX Flat 9.5 MM AQDEXZ0950
AQDEXZ0950
1piece
JPY: 17,200
USD: 107.02
-
61-4786-19
［Discontinued］Aqua Drill EX Flat 9.6 MM AQDEXZ0960
AQDEXZ0960
1piece
JPY: 17,200
USD: 107.02
-
61-4786-20
［Discontinued］Aqua Drill EX Flat 9.7 MM AQDEXZ0970
AQDEXZ0970
1piece
JPY: 17,200
USD: 107.02
-
61-4786-21
［Discontinued］Aqua Drill EX Flat 9.8 MM AQDEXZ0980
AQDEXZ0980
1piece
JPY: 17,200
USD: 107.02
-
61-4786-22
［Discontinued］Aqua Drill EX Flat 9.9 MM AQDEXZ0990
AQDEXZ0990
1piece
JPY: 17,200
USD: 107.02
-
61-4786-23
［Discontinued］Aqua Drill EX Flat 10.0 MM AQDEXZ1000
AQDEXZ1000
1piece
JPY: 16,700
USD: 103.91
-
61-4786-07 ［Discontinued］Aqua Drill EX Flat 8.4 MM AQDEXZ0840
特徴
- Drill for counterbore with good drilling performance.
- Ideal for sloping surfaces and tap hole machining.
- The coating may be uneven in color, but there is no problem with performance.
- * Use of stainless steel (SUS304, etc.) is limited to a diameter of 1.99 mm or less. AQDEXZOH3D (internal oil supply) is recommended for 2.0 mm or more.
- * L1 is the back taper range.
- * Drilling up to 3D is possible, but be careful not to discharge chips by performing step processing.
仕様
- Tool Material - carbide
- Coating: AQEX
- Tip angle (°): 180
- Helix Angle (°): 20
- body (L1; mm): 42
- Diameter Tolerance (μm): 0 to -15
- Shank diameter tolerance (μm): 0 to -9
- Total length (mm): 80
- Shank diameter (mm): 8
- Blade diameter (mm): 8.4
- Groove Length (mm): 39
Order No.Order No.ss="init">
61-4786-07 ［Discontinued］Aqua Drill EX Flat 8.4 MM AQDEXZ0840特徴
仕様
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|