61-4785-61 ［Discontinued］Aqua Drill EX Flat 3.9 MM AQDEXZ0390
-
PrintPrintlass="init">
［Discontinued］Aqua Drill EX Flat 3.9 MM AQDEXZ0390 61-4785-61 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NACHI 61-4785-61 ［Discontinued］Aqua Drill EX Flat 3.9 MM AQDEXZ0390
Features
- Drill for counterbore with good drilling performance.
- Ideal for sloping surfaces and tap hole machining.
- The coating may be uneven in color, but there is no problem with performance.
- * Use of stainless steel (SUS304, etc.) is limited to a diameter of 1.99 mm or less. AQDEXZOH3D (internal oil supply) is recommended for 2.0 mm or more.
- * L1 is the back taper range.
- * Drilling up to 3D is possible, but be careful not to discharge chips by performing step processing.
Spec
- Tool Material - carbide
- Coating: AQEX
- Tip angle (°): 180
- Helix Angle (°): 20
- body (L1; mm): 18.2
- Diameter Tolerance (μm): 0 to -12
- Shank diameter tolerance (μm): 0 to -8
- Total length (mm): 50
- Shank diameter (mm): 6
- Blade diameter (mm): 3.9
- Groove Length (mm): 18
Order No.Order No.ss="init"> ［Discontinued］Aqua Drill EX Flat 3.9 MM AQDEXZ0390 61-4785-61 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NACHI 61-4785-61 ［Discontinued］Aqua Drill EX Flat 3.9 MM AQDEXZ0390
特徴
- Drill for counterbore with good drilling performance.
- Ideal for sloping surfaces and tap hole machining.
- The coating may be uneven in color, but there is no problem with performance.
- * Use of stainless steel (SUS304, etc.) is limited to a diameter of 1.99 mm or less. AQDEXZOH3D (internal oil supply) is recommended for 2.0 mm or more.
- * L1 is the back taper range.
- * Drilling up to 3D is possible, but be careful not to discharge chips by performing step processing.
仕様
- Tool Material - carbide
- Coating: AQEX
- Tip angle (°): 180
- Helix Angle (°): 20
- body (L1; mm): 18.2
- Diameter Tolerance (μm): 0 to -12
- Shank diameter tolerance (μm): 0 to -8
- Total length (mm): 50
- Shank diameter (mm): 6
- Blade diameter (mm): 3.9
- Groove Length (mm): 18
アズワン品番 61-4785-61 Model No. AQDEXZ0390 JANコード 2002003320398 標準価格 JPY: 7,740 USD: 48.16 Excange rate 1USD= 160.72JPY
Valid price in JapanQuantity 1piece 
［Discontinued］Aqua Drill EX Flat 3.9 MM AQDEXZ0390 61-4785-61 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NACHI 61-4785-61 ［Discontinued］Aqua Drill EX Flat 3.9 MM AQDEXZ0390
特徴
- Drill for counterbore with good drilling performance.
- Ideal for sloping surfaces and tap hole machining.
- The coating may be uneven in color, but there is no problem with performance.
- * Use of stainless steel (SUS304, etc.) is limited to a diameter of 1.99 mm or less. AQDEXZOH3D (internal oil supply) is recommended for 2.0 mm or more.
- * L1 is the back taper range.
- * Drilling up to 3D is possible, but be careful not to discharge chips by performing step processing.
仕様
- Tool Material - carbide
- Coating: AQEX
- Tip angle (°): 180
- Helix Angle (°): 20
- body (L1; mm): 18.2
- Diameter Tolerance (μm): 0 to -12
- Shank diameter tolerance (μm): 0 to -8
- Total length (mm): 50
- Shank diameter (mm): 6
- Blade diameter (mm): 3.9
- Groove Length (mm): 18
アズワン品番 61-4785-61 型番 AQDEXZ0390 JANコード 2002003320398 標準価格 JPY: 7,740 USD: 48.16 Excange rate 1USD= 160.72JPY
Valid price in Japan入り数 1piece
在庫数 -
