61-1256-76 MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.6 x Blade Length: 0.9mm) MS2XLD0060N020
Features
- This series uses MS coating to realize cost performance.
- It can be used in a wide range of materials from raw materials to high-hardness steel and difficult-to-cut materials.
- Suitable for deep grooving in small diameter end mills.
- Work Material: Carbon Steel, Alloy Steel, High Hardness Steel (~55HRC), Stainless Steel (Austenitic), Heat Resistant Alloy.
Spec
- Blade diameter (mm): 0.6
- blade length (mm): 0.9
- Length (mm): 45
- Shank diameter (mm): 4
- length under head (mm): 2
- Surface treatment: (Al, Ti) N coating (MS)
- screw is angle 30 °
- Center sheet: with
- pole ultrafine particles Cemented carbide (UWC)
- Application: workpiece: Carbon steel, alloy steel, hardened steel, Stainless steel (austenitic), Heat resistance alloy.
- Country of origin: Japan
- Manufacturer's model number: MS2XLD0060N020
- CODE No.: 671-4358
Package size：13×67×11 mm 10 g [About Package size]
| Order No. | 61-1256-76 | |
|---|---|---|
| Model No. | MS2XLD0060N020 | |
| JAN Code | 4994196378509 | |
| Standard price |
JPY: 3,350
USD: 21.00
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. |
Blade diameter |
Blade length |
Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1256-67 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.2 x Blade Length: 0.3mm) MS2XLD0020N010 | MS2XLD0020N010 | 0.2mm | 0.3mm | 1piece | JPY: 7,950 | USD: 49.83 |
|
|
 |
61-1256-68 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.3 x Blade Length: 0.4mm) MS2XLD0030N010 | MS2XLD0030N010 | 0.3mm | 0.4mm | 1piece | JPY: 6,340 | USD: 39.74 |
|
|
 |
61-1256-69 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.3 x Blade Length: 0.4mm) MS2XLD0030N060 | MS2XLD0030N060 | 0.3mm | 0.4mm | 1piece | JPY: 10,400 | USD: 65.19 |
|
|
 |
61-1256-70 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.4 x Blade Length: 0.6mm) MS2XLD0040N020 | MS2XLD0040N020 | 0.4mm | 0.6mm | 1piece | JPY: 4,670 | USD: 29.27 |
|
|
 |
61-1256-71 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.4 x Blade Length: 0.6mm) MS2XLD0040N040 | MS2XLD0040N040 | 0.4mm | 0.6mm | 1piece | JPY: 4,670 | USD: 29.27 |
|
|
 |
61-1256-72 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N020 | MS2XLD0050N020 | 0.5mm | 0.7mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-73 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N040 | MS2XLD0050N040 | 0.5mm | 0.7mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-74 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N060 | MS2XLD0050N060 | 0.5mm | 0.7mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-75 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N100 | MS2XLD0050N100 | 0.5mm | 0.7mm | 1piece | JPY: 5,580 | USD: 34.98 |
|
|
 |
61-1256-76 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.6 x Blade Length: 0.9mm) MS2XLD0060N020 | MS2XLD0060N020 | 0.6mm | 0.9mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-77 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.6 x Blade Length: 0.9mm) MS2XLD0060N040 | MS2XLD0060N040 | 0.6mm | 0.9mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-78 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.6 x Blade Length: 0.9mm) MS2XLD0060N060 | MS2XLD0060N060 | 0.6mm | 0.9mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-79 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.6 x Blade Length: 0.9mm) MS2XLD0060N080 | MS2XLD0060N080 | 0.6mm | 0.9mm | 1piece | JPY: 5,580 | USD: 34.98 |
|
|
 |
61-1256-80 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.6 x Blade Length: 0.9mm) MS2XLD0060N100 | MS2XLD0060N100 | 0.6mm | 0.9mm | 1piece | JPY: 6,970 | USD: 43.69 |
|
|
 |
61-1256-81 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.7 x Blade Length: 1.0mm) MS2XLD0070N020 | MS2XLD0070N020 | 0.7mm | 1.0mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-82 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.7 x Blade Length: 1.0mm) MS2XLD0070N040 | MS2XLD0070N040 | 0.7mm | 1.0mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-83 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.7 x Blade Length: 1.0mm) MS2XLD0070N080 | MS2XLD0070N080 | 0.7mm | 1.0mm | 1piece | JPY: 4,870 | USD: 30.53 |
|
|
 |
61-1256-84 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.8 x Blade Length: 1.2mm) MS2XLD0080N040 | MS2XLD0080N040 | 0.8mm | 1.2mm | 1piece | JPY: 3,770 | USD: 23.63 |
|
|
 |
61-1256-85 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.8 x Blade Length: 1.2mm) MS2XLD0080N060 | MS2XLD0080N060 | 0.8mm | 1.2mm | 1piece | JPY: 3,770 | USD: 23.63 |
|
|
 |
61-1256-86 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.8 x Blade Length: 1.2mm) MS2XLD0080N080 | MS2XLD0080N080 | 0.8mm | 1.2mm | 1piece | JPY: 3,770 | USD: 23.63 |
|
|
 |
61-1256-87 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.8 x Blade Length: 1.2mm) MS2XLD0080N100 | MS2XLD0080N100 | 0.8mm | 1.2mm | 1piece | JPY: 5,580 | USD: 34.98 |
|
|
 |
61-1256-88 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.9 x Blade Length: 1.4mm) MS2XLD0090N060 | MS2XLD0090N060 | 0.9mm | 1.4mm | 1piece | JPY: 3,770 | USD: 23.63 |
|
|
 |
61-1256-89 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N040 | MS2XLD0100N040 | 1.0mm | 1.5mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-90 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N060 | MS2XLD0100N060 | 1.0mm | 1.5mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-91 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N080 | MS2XLD0100N080 | 1.0mm | 1.5mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-92 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N100 | MS2XLD0100N100 | 1.0mm | 1.5mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-93 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N120 | MS2XLD0100N120 | 1.0mm | 1.5mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-94 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N200 | MS2XLD0100N200 | 1.0mm | 1.5mm | 1piece | JPY: 5,580 | USD: 34.98 |
|
|
 |
61-1256-95 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N250 | MS2XLD0100N250 | 1.0mm | 1.5mm | 1piece | JPY: 6,290 | USD: 39.43 |
|
|
 |
61-1256-96 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.2 x Blade Length: 1.8mm) MS2XLD0120N080 | MS2XLD0120N080 | 1.2mm | 1.8mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1256-97 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.2 x Blade Length: 1.8mm) MS2XLD0120N120 | MS2XLD0120N120 | 1.2mm | 1.8mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1256-98 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N060 | MS2XLD0150N060 | 1.5mm | 2.3mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1256-99 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N080 | MS2XLD0150N080 | 1.5mm | 2.3mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1257-01 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N100 | MS2XLD0150N100 | 1.5mm | 2.3mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1257-02 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N120 | MS2XLD0150N120 | 1.5mm | 2.3mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1257-03 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N140 | MS2XLD0150N140 | 1.5mm | 2.3mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1257-04 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N200 | MS2XLD0150N200 | 1.5mm | 2.3mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1257-05 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N250 | MS2XLD0150N250 | 1.5mm | 2.3mm | 1piece | JPY: 5,580 | USD: 34.98 |
|
|
 |
61-1257-06 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N060 | MS2XLD0200N060 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-07 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N080 | MS2XLD0200N080 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-08 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N100 | MS2XLD0200N100 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-09 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N120 | MS2XLD0200N120 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-10 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N160 | MS2XLD0200N160 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-11 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N180 | MS2XLD0200N180 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-12 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N250 | MS2XLD0200N250 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-13 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N300 | MS2XLD0200N300 | 2.0mm | 3.0mm | 1piece | JPY: 4,600 | USD: 28.84 |
|
|
 |
61-1257-14 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.5 x Blade Length: 3.7mm) MS2XLD0250N120 | MS2XLD0250N120 | 2.5mm | 3.7mm | 1piece | JPY: 3,770 | USD: 23.63 |
|
|
 |
61-1257-15 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N120 | MS2XLD0300N120 | 3.0mm | 4.5mm | 1piece | JPY: 4,870 | USD: 30.53 |
|
|
 |
61-1257-16 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N160 | MS2XLD0300N160 | 3.0mm | 4.5mm | 1piece | JPY: 4,870 | USD: 30.53 |
|
|
 |
61-1257-17 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N200 | MS2XLD0300N200 | 3.0mm | 4.5mm | 1piece | JPY: 4,870 | USD: 30.53 |
|
|
 |
61-1257-18 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N250 | MS2XLD0300N250 | 3.0mm | 4.5mm | 1piece | JPY: 4,870 | USD: 30.53 |
|
|
 |
61-1257-19 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N300 | MS2XLD0300N300 | 3.0mm | 4.5mm | 1piece | JPY: 5,720 | USD: 35.86 |
|
|
 |
61-1257-20 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N400 | MS2XLD0300N400 | 3.0mm | 4.5mm | 1piece | JPY: 6,000 | USD: 37.61 |
|
|
 |
61-1257-21 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N500 | MS2XLD0300N500 | 3.0mm | 4.5mm | 1piece | JPY: 8,370 | USD: 52.47 |
|
|
 |
61-1257-22 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N160 | MS2XLD0400N160 | 4.0mm | 6.0mm | 1piece | JPY: 5,860 | USD: 36.73 |
|
|
 |
61-1257-23 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N200 | MS2XLD0400N200 | 4.0mm | 6.0mm | 1piece | JPY: 5,860 | USD: 36.73 |
|
|
 |
61-1257-24 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N250 | MS2XLD0400N250 | 4.0mm | 6.0mm | 1piece | JPY: 5,860 | USD: 36.73 |
|
|
 |
61-1257-25 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N300 | MS2XLD0400N300 | 4.0mm | 6.0mm | 1piece | JPY: 5,860 | USD: 36.73 |
|
|
 |
61-1257-26 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N400 | MS2XLD0400N400 | 4.0mm | 6.0mm | 1piece | JPY: 7,330 | USD: 45.95 |
|
|
 |
61-1257-27 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N500 | MS2XLD0400N500 | 4.0mm | 6.0mm | 1piece | JPY: 11,140 | USD: 69.83 |
|
|
 |
61-1257-28 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N600 | MS2XLD0400N600 | 4.0mm | 6.0mm | 1piece | JPY: 12,760 | USD: 79.99 |
|
|
 |
61-1257-29 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ5.0 x Blade Length: 7.5mm) MS2XLD0500N250 | MS2XLD0500N250 | 5.0mm | 7.5mm | 1piece | JPY: 7,330 | USD: 45.95 |
|
|
 |
61-1257-30 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ5.0 x Blade Length: 7.5mm) MS2XLD0500N350 | MS2XLD0500N350 | 5.0mm | 7.5mm | 1piece | JPY: 7,330 | USD: 45.95 |
|
|
 |
61-1257-31 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ5.0 x Blade Length: 7.5mm) MS2XLD0500N500 | MS2XLD0500N500 | 5.0mm | 7.5mm | 1piece | JPY: 11,140 | USD: 69.83 |
|
|
 |
61-1257-32 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ5.0 x Blade Length: 7.5mm) MS2XLD0500N600 | MS2XLD0500N600 | 5.0mm | 7.5mm | 1piece | JPY: 12,760 | USD: 79.99 |
|
|
 |
61-1257-33 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ6.0 x Blade Length: 9.0mm) MS2XLD0600N300 | MS2XLD0600N300 | 6.0mm | 9.0mm | 1piece | JPY: 7,330 | USD: 45.95 |
|
|
 |
61-1257-34 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ6.0 x Blade Length: 9.0mm) MS2XLD0600N400 | MS2XLD0600N400 | 6.0mm | 9.0mm | 1piece | JPY: 8,780 | USD: 55.04 |
|
|
 |
61-1257-35 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ6.0 x Blade Length: 9.0mm) MS2XLD0600N500 | MS2XLD0600N500 | 6.0mm | 9.0mm | 1piece | JPY: 11,140 | USD: 69.83 |
|
|
 |
61-1257-36 | MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ6.0 x Blade Length: 9.0mm) MS2XLD0600N600 | MS2XLD0600N600 | 6.0mm | 9.0mm | 1piece | JPY: 13,250 | USD: 83.06 |
|