61-1256-74 MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N060
Features
- This series uses MS coating to realize cost performance.
- It can be used in a wide range of materials from raw materials to high-hardness steel and difficult-to-cut materials.
- Suitable for deep grooving in small diameter end mills.
- Work Material: Carbon Steel, Alloy Steel, High Hardness Steel (~55HRC), Stainless Steel (Austenitic), Heat Resistant Alloy.
SpecSpec class="init">
61-1256-74 MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N060 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Mitsubishi Materials Corporation
61-1256-74 MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N060
特徴
- This series uses MS coating to realize cost performance.
- It can be used in a wide range of materials from raw materials to high-hardness steel and difficult-to-cut materials.
- Suitable for deep grooving in small diameter end mills.
- Work Material: Carbon Steel, Alloy Steel, High Hardness Steel (~55HRC), Stainless Steel (Austenitic), Heat Resistant Alloy.
仕様
- Blade diameter (mm): 0.5
- blade length (mm): 0.7
- Length (mm): 45
- Shank diameter (mm): 4
- length under head (mm): 6
- Surface treatment: (Al, Ti) N coating (MS)
- screw is angle 30 °
- Center sheet: with
- pole ultrafine particles Cemented carbide (UWC)
- Application: workpiece: Carbon steel, alloy steel, hardened steel, Stainless steel (austenitic), Heat resistance alloy.
- Country of origin: Japan
- Manufacturer's model number: MS2XLD0050N060
- CODE No.: 671-4315
-
荷姿サイズ：12×66×12 mm 10 g
[荷姿サイズについて]
アズワン品番
61-1256-74
型番
MS2XLD0050N060
JANコード
4994196369460
標準価格
JPY: 3,350
USD: 21.00
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
Product imageProduct imagess="init">
61-1256-74 MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N060 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Mitsubishi Materials Corporation
61-1256-74 MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N060
特徴
- This series uses MS coating to realize cost performance.
- It can be used in a wide range of materials from raw materials to high-hardness steel and difficult-to-cut materials.
- Suitable for deep grooving in small diameter end mills.
- Work Material: Carbon Steel, Alloy Steel, High Hardness Steel (~55HRC), Stainless Steel (Austenitic), Heat Resistant Alloy.
仕様
- Blade diameter (mm): 0.5
- blade length (mm): 0.7
- Length (mm): 45
- Shank diameter (mm): 4
- length under head (mm): 6
- Surface treatment: (Al, Ti) N coating (MS)
- screw is angle 30 °
- Center sheet: with
- pole ultrafine particles Cemented carbide (UWC)
- Application: workpiece: Carbon steel, alloy steel, hardened steel, Stainless steel (austenitic), Heat resistance alloy.
- Country of origin: Japan
- Manufacturer's model number: MS2XLD0050N060
- CODE No.: 671-4315
-
荷姿サイズ：12×66×12 mm 10 g
[荷姿サイズについて]
アズワン品番
61-1256-74
型番
MS2XLD0050N060
JANコード
4994196369460
標準価格
JPY: 3,350
USD: 21.00
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
Blade diameter
Blade length
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
61-1256-67
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.2 x Blade Length: 0.3mm) MS2XLD0020N010
MS2XLD0020N010
0.2mm
0.3mm
1piece
JPY: 7,950
USD: 49.83
61-1256-68
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.3 x Blade Length: 0.4mm) MS2XLD0030N010
MS2XLD0030N010
0.3mm
0.4mm
1piece
JPY: 6,340
USD: 39.74
61-1256-69
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.3 x Blade Length: 0.4mm) MS2XLD0030N060
MS2XLD0030N060
0.3mm
0.4mm
1piece
JPY: 10,400
USD: 65.19
61-1256-70
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.4 x Blade Length: 0.6mm) MS2XLD0040N020
MS2XLD0040N020
0.4mm
0.6mm
1piece
JPY: 4,670
USD: 29.27
61-1256-71
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.4 x Blade Length: 0.6mm) MS2XLD0040N040
MS2XLD0040N040
0.4mm
0.6mm
1piece
JPY: 4,670
USD: 29.27
61-1256-72
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N020
MS2XLD0050N020
0.5mm
0.7mm
1piece
JPY: 3,350
USD: 21.00
61-1256-73
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N040
MS2XLD0050N040
0.5mm
0.7mm
1piece
JPY: 3,350
USD: 21.00
61-1256-74
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N060
MS2XLD0050N060
0.5mm
0.7mm
1piece
JPY: 3,350
USD: 21.00
61-1256-75
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N100
MS2XLD0050N100
0.5mm
0.7mm
1piece
JPY: 5,580
USD: 34.98
61-1256-76
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.6 x Blade Length: 0.9mm) MS2XLD0060N020
MS2XLD0060N020
0.6mm
0.9mm
1piece
JPY: 3,350
USD: 21.00
61-1256-77
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.6 x Blade Length: 0.9mm) MS2XLD0060N040
MS2XLD0060N040
0.6mm
0.9mm
1piece
JPY: 3,350
USD: 21.00
61-1256-78
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.6 x Blade Length: 0.9mm) MS2XLD0060N060
MS2XLD0060N060
0.6mm
0.9mm
1piece
JPY: 3,350
USD: 21.00
61-1256-79
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.6 x Blade Length: 0.9mm) MS2XLD0060N080
MS2XLD0060N080
0.6mm
0.9mm
1piece
JPY: 5,580
USD: 34.98
61-1256-80
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.6 x Blade Length: 0.9mm) MS2XLD0060N100
MS2XLD0060N100
0.6mm
0.9mm
1piece
JPY: 6,970
USD: 43.69
61-1256-81
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.7 x Blade Length: 1.0mm) MS2XLD0070N020
MS2XLD0070N020
0.7mm
1.0mm
1piece
JPY: 3,350
USD: 21.00
61-1256-82
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.7 x Blade Length: 1.0mm) MS2XLD0070N040
MS2XLD0070N040
0.7mm
1.0mm
1piece
JPY: 3,350
USD: 21.00
61-1256-83
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.7 x Blade Length: 1.0mm) MS2XLD0070N080
MS2XLD0070N080
0.7mm
1.0mm
1piece
JPY: 4,870
USD: 30.53
61-1256-84
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.8 x Blade Length: 1.2mm) MS2XLD0080N040
MS2XLD0080N040
0.8mm
1.2mm
1piece
JPY: 3,770
USD: 23.63
61-1256-85
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.8 x Blade Length: 1.2mm) MS2XLD0080N060
MS2XLD0080N060
0.8mm
1.2mm
1piece
JPY: 3,770
USD: 23.63
61-1256-86
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.8 x Blade Length: 1.2mm) MS2XLD0080N080
MS2XLD0080N080
0.8mm
1.2mm
1piece
JPY: 3,770
USD: 23.63
61-1256-87
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.8 x Blade Length: 1.2mm) MS2XLD0080N100
MS2XLD0080N100
0.8mm
1.2mm
1piece
JPY: 5,580
USD: 34.98
61-1256-88
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.9 x Blade Length: 1.4mm) MS2XLD0090N060
MS2XLD0090N060
0.9mm
1.4mm
1piece
JPY: 3,770
USD: 23.63
61-1256-89
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N040
MS2XLD0100N040
1.0mm
1.5mm
1piece
JPY: 3,480
USD: 21.81
61-1256-90
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N060
MS2XLD0100N060
1.0mm
1.5mm
1piece
JPY: 3,480
USD: 21.81
61-1256-91
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N080
MS2XLD0100N080
1.0mm
1.5mm
1piece
JPY: 3,480
USD: 21.81
61-1256-92
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N100
MS2XLD0100N100
1.0mm
1.5mm
1piece
JPY: 3,480
USD: 21.81
61-1256-93
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N120
MS2XLD0100N120
1.0mm
1.5mm
1piece
JPY: 3,480
USD: 21.81
61-1256-94
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N200
MS2XLD0100N200
1.0mm
1.5mm
1piece
JPY: 5,580
USD: 34.98
61-1256-95
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.0 x Blade Length: 1.5mm) MS2XLD0100N250
MS2XLD0100N250
1.0mm
1.5mm
1piece
JPY: 6,290
USD: 39.43
61-1256-96
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.2 x Blade Length: 1.8mm) MS2XLD0120N080
MS2XLD0120N080
1.2mm
1.8mm
1piece
JPY: 3,620
USD: 22.69
61-1256-97
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.2 x Blade Length: 1.8mm) MS2XLD0120N120
MS2XLD0120N120
1.2mm
1.8mm
1piece
JPY: 3,620
USD: 22.69
61-1256-98
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N060
MS2XLD0150N060
1.5mm
2.3mm
1piece
JPY: 3,620
USD: 22.69
61-1256-99
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N080
MS2XLD0150N080
1.5mm
2.3mm
1piece
JPY: 3,620
USD: 22.69
61-1257-01
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N100
MS2XLD0150N100
1.5mm
2.3mm
1piece
JPY: 3,620
USD: 22.69
61-1257-02
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N120
MS2XLD0150N120
1.5mm
2.3mm
1piece
JPY: 3,620
USD: 22.69
61-1257-03
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N140
MS2XLD0150N140
1.5mm
2.3mm
1piece
JPY: 3,620
USD: 22.69
61-1257-04
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N200
MS2XLD0150N200
1.5mm
2.3mm
1piece
JPY: 3,620
USD: 22.69
61-1257-05
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ1.5 x Blade Length: 2.3mm) MS2XLD0150N250
MS2XLD0150N250
1.5mm
2.3mm
1piece
JPY: 5,580
USD: 34.98
61-1257-06
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N060
MS2XLD0200N060
2.0mm
3.0mm
1piece
JPY: 3,700
USD: 23.19
61-1257-07
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N080
MS2XLD0200N080
2.0mm
3.0mm
1piece
JPY: 3,700
USD: 23.19
61-1257-08
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N100
MS2XLD0200N100
2.0mm
3.0mm
1piece
JPY: 3,700
USD: 23.19
61-1257-09
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N120
MS2XLD0200N120
2.0mm
3.0mm
1piece
JPY: 3,700
USD: 23.19
61-1257-10
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N160
MS2XLD0200N160
2.0mm
3.0mm
1piece
JPY: 3,700
USD: 23.19
61-1257-11
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N180
MS2XLD0200N180
2.0mm
3.0mm
1piece
JPY: 3,700
USD: 23.19
61-1257-12
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N250
MS2XLD0200N250
2.0mm
3.0mm
1piece
JPY: 3,700
USD: 23.19
61-1257-13
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.0 x Blade Length: 3.0mm) MS2XLD0200N300
MS2XLD0200N300
2.0mm
3.0mm
1piece
JPY: 4,600
USD: 28.84
61-1257-14
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ2.5 x Blade Length: 3.7mm) MS2XLD0250N120
MS2XLD0250N120
2.5mm
3.7mm
1piece
JPY: 3,770
USD: 23.63
61-1257-15
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N120
MS2XLD0300N120
3.0mm
4.5mm
1piece
JPY: 4,870
USD: 30.53
61-1257-16
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N160
MS2XLD0300N160
3.0mm
4.5mm
1piece
JPY: 4,870
USD: 30.53
61-1257-17
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N200
MS2XLD0300N200
3.0mm
4.5mm
1piece
JPY: 4,870
USD: 30.53
61-1257-18
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N250
MS2XLD0300N250
3.0mm
4.5mm
1piece
JPY: 4,870
USD: 30.53
61-1257-19
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N300
MS2XLD0300N300
3.0mm
4.5mm
1piece
JPY: 5,720
USD: 35.86
61-1257-20
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N400
MS2XLD0300N400
3.0mm
4.5mm
1piece
JPY: 6,000
USD: 37.61
61-1257-21
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ3.0 x Blade Length: 4.5mm) MS2XLD0300N500
MS2XLD0300N500
3.0mm
4.5mm
1piece
JPY: 8,370
USD: 52.47
61-1257-22
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N160
MS2XLD0400N160
4.0mm
6.0mm
1piece
JPY: 5,860
USD: 36.73
61-1257-23
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N200
MS2XLD0400N200
4.0mm
6.0mm
1piece
JPY: 5,860
USD: 36.73
61-1257-24
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N250
MS2XLD0400N250
4.0mm
6.0mm
1piece
JPY: 5,860
USD: 36.73
61-1257-25
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N300
MS2XLD0400N300
4.0mm
6.0mm
1piece
JPY: 5,860
USD: 36.73
61-1257-26
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N400
MS2XLD0400N400
4.0mm
6.0mm
1piece
JPY: 7,330
USD: 45.95
61-1257-27
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N500
MS2XLD0400N500
4.0mm
6.0mm
1piece
JPY: 11,140
USD: 69.83
61-1257-28
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ4.0 x Blade Length: 6.0mm) MS2XLD0400N600
MS2XLD0400N600
4.0mm
6.0mm
1piece
JPY: 12,760
USD: 79.99
61-1257-29
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ5.0 x Blade Length: 7.5mm) MS2XLD0500N250
MS2XLD0500N250
5.0mm
7.5mm
1piece
JPY: 7,330
USD: 45.95
61-1257-30
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ5.0 x Blade Length: 7.5mm) MS2XLD0500N350
MS2XLD0500N350
5.0mm
7.5mm
1piece
JPY: 7,330
USD: 45.95
61-1257-31
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ5.0 x Blade Length: 7.5mm) MS2XLD0500N500
MS2XLD0500N500
5.0mm
7.5mm
1piece
JPY: 11,140
USD: 69.83
61-1257-32
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ5.0 x Blade Length: 7.5mm) MS2XLD0500N600
MS2XLD0500N600
5.0mm
7.5mm
1piece
JPY: 12,760
USD: 79.99
61-1257-33
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ6.0 x Blade Length: 9.0mm) MS2XLD0600N300
MS2XLD0600N300
6.0mm
9.0mm
1piece
JPY: 7,330
USD: 45.95
61-1257-34
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ6.0 x Blade Length: 9.0mm) MS2XLD0600N400
MS2XLD0600N400
6.0mm
9.0mm
1piece
JPY: 8,780
USD: 55.04
61-1257-35
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ6.0 x Blade Length: 9.0mm) MS2XLD0600N500
MS2XLD0600N500
6.0mm
9.0mm
1piece
JPY: 11,140
USD: 69.83
61-1257-36
MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ6.0 x Blade Length: 9.0mm) MS2XLD0600N600
MS2XLD0600N600
6.0mm
9.0mm
1piece
JPY: 13,250
USD: 83.06
61-1256-74 MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N060
特徴
- This series uses MS coating to realize cost performance.
- It can be used in a wide range of materials from raw materials to high-hardness steel and difficult-to-cut materials.
- Suitable for deep grooving in small diameter end mills.
- Work Material: Carbon Steel, Alloy Steel, High Hardness Steel (~55HRC), Stainless Steel (Austenitic), Heat Resistant Alloy.
仕様
- Blade diameter (mm): 0.5
- blade length (mm): 0.7
- Length (mm): 45
- Shank diameter (mm): 4
- length under head (mm): 6
- Surface treatment: (Al, Ti) N coating (MS)
- screw is angle 30 °
- Center sheet: with
- pole ultrafine particles Cemented carbide (UWC)
- Application: workpiece: Carbon steel, alloy steel, hardened steel, Stainless steel (austenitic), Heat resistance alloy.
- Country of origin: Japan
- Manufacturer's model number: MS2XLD0050N060
- CODE No.: 671-4315
荷姿サイズ：12×66×12 mm 10 g [荷姿サイズについて]
| アズワン品番 | 61-1256-74 | |
|---|---|---|
| 型番 | MS2XLD0050N060 | |
| JANコード | 4994196369460 | |
| 標準価格 |
JPY: 3,350
USD: 21.00
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
Product imageProduct imagess="init">
61-1256-74 MSTAR Carbide Small diameter Endmill (MS2XL, General Purpose, 2 Blades, Φ0.5 x Blade Length: 0.7mm) MS2XLD0050N060特徴
仕様
荷姿サイズ：12×66×12 mm 10 g [荷姿サイズについて]
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|