60-9817-45 Vacuum Specimen Dryer Resin Coating VOM-1000A
Features
- For drying, moisture deaeration, and solvent removal of trace samples
- The suction port and leak port are located below the surface of the hot plate, and the structure prevents air from directly hitting the sample, thus preventing scattering of the powder sample during leakage and contamination by dripping of condensation onto the sample.
- The hot plate surface achieves excellent heating effect due to uniform temperature distribution. Ceramic coating treatment provides excellent heat and chemical resistance.
- Since it is a glass chamber, the sample can be checked even during decompression.
- Glass shatterproof resin coating.
Spec
- Heating Method: Plate Heating Method
- Performance
- Temperature Adjustment Range: Room Temperature +10~200°C
- Temperature adjustment accuracy: ±1°C or less
- Achieved Vacuum Degree: 66.5 Pa (0.5Torr) or Less (When Using an Oil Rotary Vacuum Pump)
- Function
- Temperature control: P.I.D control, SSR output
- Temperature Sensor: Platinum Temperature Measuring Resistor Pt100Ω
- Temperature Setting/Display: Sheet Key Setting/Digital Display (Minimum Digit 1°C)
- Safety Features: Variable Independent Excess Temperature Rise Prevention Device, Fuse, Temperature Sensor Malfunction, Watchdog
- Configuration
- Heater: 250 W
- Glass Chamber: Bell Jar Type (EYELACOAT® Specification)
- Vacuum gauge: Bourdon tube type (-100~0KPa)
- Hot Plate: Aluminum Die Cast (Ceramic Coating)
- Atmospheric Release Valve: Manual Needle Valve
- Standard
- Nozzle Diameter: Outer Diameter φ10.5 mm Hose Port (Suction Port, Leak Port)
- Internal Dimensions (mm): φ150 x 250
- Wetted Part Material: Stainless Steel, Silicon, Viton ®, Teflon ®, PP, Ceramic, Brass
- Operating Ambient Temperature Range: 5~35°C
- External Dimensions (mm): 200 x 240 x 150 (405) * Dimensions in () include protrusions
- Weight: Approximately 6.2 kg
- Power Input/Power Voltage: 3 A, 300VA/100 VAC 50/60Hz
- *The performance is at room temperature of 20°C, rated power supply voltage, and no load.
- *Temperature adjustment accuracy is the surface temperature of the center of the hot plate.
- *The achieved vacuum depends on the vacuum pump used. Diaphragm type vacuum pump cannot reach due to the capacity of the pump. Other operating conditions may not fall within this range.
- *Vacuum pump is sold separately.
- *Select a vacuum pump with a displacement of 20 L/min or more.
- Product code: 286840
- *There will be two boxes.
Package size：470×340×690 mm 11 kg [About Package size]
| Order No. | 60-9817-45 | |
|---|---|---|
| Model No. | VOM-1000A | |
| JAN Code | 4573528562634 | |
| Standard price |
JPY: 332,000
USD: 2,082.55
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1unit | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
60-9817-45 | Vacuum Specimen Dryer Resin Coating VOM-1000A | VOM-1000A | 1unit | JPY: 332,000 | USD: 2,082.55 |
|
|
 |
60-9817-46 | vacuum specimen dryer VOM-1000A1 | VOM-1000A1 | 1unit | JPY: 229,000 | USD: 1,436.46 |
|
|
 |
63-1393-99 | Vacuum specimen dryer VOM-1000B | VOM-1000B | 1unit | JPY: 251,000 | USD: 1,574.46 |
|
|
 |
63-1393-98 | ［Discontinued］Vacuum specimen dryer VOM-1000A | VOM-1000A | 1unit | JPY: 241,000 | USD: 1,511.73 |
-
|
Related Products
1 / 1 ページ
Product Catalog
| Catalog Name | Page |
|---|---|
| AS ONE Catalog 2025 [Instruments for Laboratory] | 9999 |