60-1287-63 Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.3MPA) AUR38-75X-0.10.3MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1287-63 Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.3MPA) AUR38-75X-0.10.3MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1287-63 Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.3MPA) AUR38-75X-0.10.3MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1287-63 Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.3MPA) AUR38-75X-0.10.3MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1287-63 Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.3MPA) AUR38-75X-0.10.3MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Vertical Plastic Casing
- Shape: A-frame
- Connection Screw: R3/8
- Wetted Part Material: Corrosion Resistant
- Pressure Range (MPA): -0.1~0.3
-
Order No.
60-1287-63
Model No.
AUR38-75X-0.10.3MPA
Standard price
JPY: 17,400
USD: 108.26
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1287-59
Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/0.1MPA) AUR38-75X-0.10.1MPA
AUR38-75X-0.10.1MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-60
Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/0.16MPA) AUR38-75X-0.10.16MPA
AUR38-75X-0.10.16MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-61
Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/0.2MPA) AUR38-75X-0.10.2MPA
AUR38-75X-0.10.2MPA
1piece
JPY: 17,400
USD: 108.26
60-1287-62
Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.25MPA) AUR38-75X-0.10.25MPA
AUR38-75X-0.10.25MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-63
Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.3MPA) AUR38-75X-0.10.3MPA
AUR38-75X-0.10.3MPA
1piece
JPY: 17,400
USD: 108.26
60-1287-64
Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.4MPA) AUR38-75X-0.10.4MPA
AUR38-75X-0.10.4MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-65
Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.6MPA) AUR38-75X-0.10.6MPA
AUR38-75X-0.10.6MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-66
Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/1MPA) AUR38-75X-0.11MPA
AUR38-75X-0.11MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-67
Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/1.6MPA) AUR38-75X-0.11.6MPA
AUR38-75X-0.11.6MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-63 Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.3MPA) AUR38-75X-0.10.3MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1287-63 Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.3MPA) AUR38-75X-0.10.3MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1287-63 Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.3MPA) AUR38-75X-0.10.3MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Vertical Plastic Casing
- Shape: A-frame
- Connection Screw: R3/8
- Wetted Part Material: Corrosion Resistant
- Pressure Range (MPA): -0.1~0.3
-
Order No.
60-1287-63
Model No.
AUR38-75X-0.10.3MPA
Standard price
JPY: 17,400
USD: 108.26
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1287-59
Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/0.1MPA) AUR38-75X-0.10.1MPA
AUR38-75X-0.10.1MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-60
Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/0.16MPA) AUR38-75X-0.10.16MPA
AUR38-75X-0.10.16MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-61
Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/0.2MPA) AUR38-75X-0.10.2MPA
AUR38-75X-0.10.2MPA
1piece
JPY: 17,400
USD: 108.26
60-1287-62
Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.25MPA) AUR38-75X-0.10.25MPA
AUR38-75X-0.10.25MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-63
Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.3MPA) AUR38-75X-0.10.3MPA
AUR38-75X-0.10.3MPA
1piece
JPY: 17,400
USD: 108.26
60-1287-64
Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.4MPA) AUR38-75X-0.10.4MPA
AUR38-75X-0.10.4MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-65
Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.6MPA) AUR38-75X-0.10.6MPA
AUR38-75X-0.10.6MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-66
Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/1MPA) AUR38-75X-0.11MPA
AUR38-75X-0.11MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-67
Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/1.6MPA) AUR38-75X-0.11.6MPA
AUR38-75X-0.11.6MPA
1piece
JPY: 17,300
USD: 107.64
60-1287-63 Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.3MPA) AUR38-75X-0.10.3MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- It is a self-supporting type with the connection part directly attached to pressure piping.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Vertical Plastic Casing
- Shape: A-frame
- Connection Screw: R3/8
- Wetted Part Material: Corrosion Resistant
- Pressure Range (MPA): -0.1~0.3
| Order No. | 60-1287-63 | |
|---|---|---|
| Model No. | AUR38-75X-0.10.3MPA | |
| Standard price |
JPY: 17,400
USD: 108.26
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
60-1287-59 | Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/0.1MPA) AUR38-75X-0.10.1MPA | AUR38-75X-0.10.1MPA | 1piece | JPY: 17,300 | USD: 107.64 |
|
|
|
60-1287-60 | Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/0.16MPA) AUR38-75X-0.10.16MPA | AUR38-75X-0.10.16MPA | 1piece | JPY: 17,300 | USD: 107.64 |
|
|
|
60-1287-61 | Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/0.2MPA) AUR38-75X-0.10.2MPA | AUR38-75X-0.10.2MPA | 1piece | JPY: 17,400 | USD: 108.26 |
|
|
|
60-1287-62 | Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.25MPA) AUR38-75X-0.10.25MPA | AUR38-75X-0.10.25MPA | 1piece | JPY: 17,300 | USD: 107.64 |
|
|
|
60-1287-63 | Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.3MPA) AUR38-75X-0.10.3MPA | AUR38-75X-0.10.3MPA | 1piece | JPY: 17,400 | USD: 108.26 |
|
|
|
60-1287-64 | Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.4MPA) AUR38-75X-0.10.4MPA | AUR38-75X-0.10.4MPA | 1piece | JPY: 17,300 | USD: 107.64 |
|
|
|
60-1287-65 | Sealed Type Pressure Gauge Φ75 (BC12-183 x -0.1/0.6MPA) AUR38-75X-0.10.6MPA | AUR38-75X-0.10.6MPA | 1piece | JPY: 17,300 | USD: 107.64 |
|
|
|
60-1287-66 | Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/1MPA) AUR38-75X-0.11MPA | AUR38-75X-0.11MPA | 1piece | JPY: 17,300 | USD: 107.64 |
|
|
|
60-1287-67 | Sealed Coupled Surface Diameter: Φ75 (BC12-183 x -0.1/1.6MPA) AUR38-75X-0.11.6MPA | AUR38-75X-0.11.6MPA | 1piece | JPY: 17,300 | USD: 107.64 |
|