60-1284-06 Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) BU38-75X-0.13.5MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Vertical Metal Case
- Shape: B Frame (Mounting Hole)
- Connection Screw: G3/8B
- Wetted Part Material: General Use
- Pressure Range (MPA): -0.1~3.5
| Order No. | 60-1284-06 | |
|---|---|---|
| Model No. | BU38-75X-0.13.5MPA | |
| Standard price |
JPY: 11,900
USD: 74.65
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product VariationsProduct Variations">
60-1284-06 Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) BU38-75X-0.13.5MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1284-06 Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) BU38-75X-0.13.5MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Vertical Metal Case
- Shape: B Frame (Mounting Hole)
- Connection Screw: G3/8B
- Wetted Part Material: General Use
- Pressure Range (MPA): -0.1~3.5
-
アズワン品番
60-1284-06
型番
BU38-75X-0.13.5MPA
標準価格
JPY: 11,900
USD: 74.65
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
Product image
アズワン品番
商品名
型番
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1283-91
Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.05MPA) BU38-75X-0.10.05MPA
BU38-75X-0.10.05MPA
1piece
JPY: 11,900
USD: 74.65
60-1283-92
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.1MPA) BU38-75X-0.10.1MPA
BU38-75X-0.10.1MPA
1piece
JPY: 11,800
USD: 74.02
60-1283-93
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.16MPA) BU38-75X-0.10.16MPA
BU38-75X-0.10.16MPA
1piece
JPY: 11,800
USD: 74.02
60-1283-94
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.2MPA) BU38-75X-0.10.2MPA
BU38-75X-0.10.2MPA
1piece
JPY: 11,900
USD: 74.65
60-1283-95
Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.25MPA) BU38-75X-0.10.25MPA
BU38-75X-0.10.25MPA
1piece
JPY: 11,800
USD: 74.02
60-1283-96
Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.3MPA) BU38-75X-0.10.3MPA
BU38-75X-0.10.3MPA
1piece
JPY: 11,900
USD: 74.65
60-1283-97
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.4MPA) BU38-75X-0.10.4MPA
BU38-75X-0.10.4MPA
1piece
JPY: 11,800
USD: 74.02
60-1283-98
Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.5MPA) BU38-75X-0.10.5MPA
BU38-75X-0.10.5MPA
1piece
JPY: 11,900
USD: 74.65
60-1283-99
Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.6MPA) BU38-75X-0.10.6MPA
BU38-75X-0.10.6MPA
1piece
JPY: 11,800
USD: 74.02
60-1284-01
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/1MPA) BU38-75X-0.11MPA
BU38-75X-0.11MPA
1piece
JPY: 11,800
USD: 74.02
60-1284-02
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/1.5MPA) BU38-75X-0.11.5MPA
BU38-75X-0.11.5MPA
1piece
JPY: 11,900
USD: 74.65
60-1284-03
Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/1.6MPA) BU38-75X-0.11.6MPA
BU38-75X-0.11.6MPA
1piece
JPY: 11,800
USD: 74.02
60-1284-04
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/2MPA) BU38-75X-0.12MPA
BU38-75X-0.12MPA
1piece
JPY: 11,900
USD: 74.65
60-1284-05
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/2.5MPA) BU38-75X-0.12.5MPA
BU38-75X-0.12.5MPA
1piece
JPY: 11,800
USD: 74.02
60-1284-06
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) BU38-75X-0.13.5MPA
BU38-75X-0.13.5MPA
1piece
JPY: 11,900
USD: 74.65
This page is the page of Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init">
60-1284-06 Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) BU38-75X-0.13.5MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1284-06 Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) BU38-75X-0.13.5MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Vertical Metal Case
- Shape: B Frame (Mounting Hole)
- Connection Screw: G3/8B
- Wetted Part Material: General Use
- Pressure Range (MPA): -0.1~3.5
-
Order No.
60-1284-06
Model No.
BU38-75X-0.13.5MPA
Standard price
JPY: 11,900
USD: 74.65
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
60-1283-91
Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.05MPA) BU38-75X-0.10.05MPA
BU38-75X-0.10.05MPA
1piece
JPY: 11,900
USD: 74.65
60-1283-92
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.1MPA) BU38-75X-0.10.1MPA
BU38-75X-0.10.1MPA
1piece
JPY: 11,800
USD: 74.02
60-1283-93
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.16MPA) BU38-75X-0.10.16MPA
BU38-75X-0.10.16MPA
1piece
JPY: 11,800
USD: 74.02
60-1283-94
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.2MPA) BU38-75X-0.10.2MPA
BU38-75X-0.10.2MPA
1piece
JPY: 11,900
USD: 74.65
60-1283-95
Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.25MPA) BU38-75X-0.10.25MPA
BU38-75X-0.10.25MPA
1piece
JPY: 11,800
USD: 74.02
60-1283-96
Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.3MPA) BU38-75X-0.10.3MPA
BU38-75X-0.10.3MPA
1piece
JPY: 11,900
USD: 74.65
60-1283-97
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.4MPA) BU38-75X-0.10.4MPA
BU38-75X-0.10.4MPA
1piece
JPY: 11,800
USD: 74.02
60-1283-98
Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.5MPA) BU38-75X-0.10.5MPA
BU38-75X-0.10.5MPA
1piece
JPY: 11,900
USD: 74.65
60-1283-99
Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.6MPA) BU38-75X-0.10.6MPA
BU38-75X-0.10.6MPA
1piece
JPY: 11,800
USD: 74.02
60-1284-01
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/1MPA) BU38-75X-0.11MPA
BU38-75X-0.11MPA
1piece
JPY: 11,800
USD: 74.02
60-1284-02
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/1.5MPA) BU38-75X-0.11.5MPA
BU38-75X-0.11.5MPA
1piece
JPY: 11,900
USD: 74.65
60-1284-03
Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/1.6MPA) BU38-75X-0.11.6MPA
BU38-75X-0.11.6MPA
1piece
JPY: 11,800
USD: 74.02
60-1284-04
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/2MPA) BU38-75X-0.12MPA
BU38-75X-0.12MPA
1piece
JPY: 11,900
USD: 74.65
60-1284-05
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/2.5MPA) BU38-75X-0.12.5MPA
BU38-75X-0.12.5MPA
1piece
JPY: 11,800
USD: 74.02
60-1284-06
Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) BU38-75X-0.13.5MPA
BU38-75X-0.13.5MPA
1piece
JPY: 11,900
USD: 74.65
60-1284-06 Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) BU38-75X-0.13.5MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Vertical Metal Case
- Shape: B Frame (Mounting Hole)
- Connection Screw: G3/8B
- Wetted Part Material: General Use
- Pressure Range (MPA): -0.1~3.5
| アズワン品番 | 60-1284-06 | |
|---|---|---|
| 型番 | BU38-75X-0.13.5MPA | |
| 標準価格 |
JPY: 11,900
USD: 74.65
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| Product image | アズワン品番 | 商品名 | 型番 | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
60-1283-91 | Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.05MPA) BU38-75X-0.10.05MPA | BU38-75X-0.10.05MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
|
|
60-1283-92 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.1MPA) BU38-75X-0.10.1MPA | BU38-75X-0.10.1MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1283-93 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.16MPA) BU38-75X-0.10.16MPA | BU38-75X-0.10.16MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1283-94 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.2MPA) BU38-75X-0.10.2MPA | BU38-75X-0.10.2MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
|
|
60-1283-95 | Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.25MPA) BU38-75X-0.10.25MPA | BU38-75X-0.10.25MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1283-96 | Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.3MPA) BU38-75X-0.10.3MPA | BU38-75X-0.10.3MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
|
|
60-1283-97 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.4MPA) BU38-75X-0.10.4MPA | BU38-75X-0.10.4MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1283-98 | Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.5MPA) BU38-75X-0.10.5MPA | BU38-75X-0.10.5MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
|
|
60-1283-99 | Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.6MPA) BU38-75X-0.10.6MPA | BU38-75X-0.10.6MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1284-01 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/1MPA) BU38-75X-0.11MPA | BU38-75X-0.11MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1284-02 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/1.5MPA) BU38-75X-0.11.5MPA | BU38-75X-0.11.5MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
|
|
60-1284-03 | Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/1.6MPA) BU38-75X-0.11.6MPA | BU38-75X-0.11.6MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1284-04 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/2MPA) BU38-75X-0.12MPA | BU38-75X-0.12MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
|
|
60-1284-05 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/2.5MPA) BU38-75X-0.12.5MPA | BU38-75X-0.12.5MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1284-06 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) BU38-75X-0.13.5MPA | BU38-75X-0.13.5MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
This page is the page of Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init">
60-1284-06 Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) BU38-75X-0.13.5MPA
Features
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- There is a mounting plate at the back, which is attached to the panel and fixed.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, specify that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Shape: Vertical Metal Case
- Shape: B Frame (Mounting Hole)
- Connection Screw: G3/8B
- Wetted Part Material: General Use
- Pressure Range (MPA): -0.1~3.5
| Order No. | 60-1284-06 | |
|---|---|---|
| Model No. | BU38-75X-0.13.5MPA | |
| Standard price |
JPY: 11,900
USD: 74.65
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
60-1283-91 | Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.05MPA) BU38-75X-0.10.05MPA | BU38-75X-0.10.05MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
|
|
60-1283-92 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.1MPA) BU38-75X-0.10.1MPA | BU38-75X-0.10.1MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1283-93 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.16MPA) BU38-75X-0.10.16MPA | BU38-75X-0.10.16MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1283-94 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.2MPA) BU38-75X-0.10.2MPA | BU38-75X-0.10.2MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
|
|
60-1283-95 | Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.25MPA) BU38-75X-0.10.25MPA | BU38-75X-0.10.25MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1283-96 | Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.3MPA) BU38-75X-0.10.3MPA | BU38-75X-0.10.3MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
|
|
60-1283-97 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/0.4MPA) BU38-75X-0.10.4MPA | BU38-75X-0.10.4MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1283-98 | Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.5MPA) BU38-75X-0.10.5MPA | BU38-75X-0.10.5MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
|
|
60-1283-99 | Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/0.6MPA) BU38-75X-0.10.6MPA | BU38-75X-0.10.6MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1284-01 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/1MPA) BU38-75X-0.11MPA | BU38-75X-0.11MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1284-02 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/1.5MPA) BU38-75X-0.11.5MPA | BU38-75X-0.11.5MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
|
|
60-1284-03 | Sealed Type Pressure Gauge Φ75 (BC10-231 x -0.1/1.6MPA) BU38-75X-0.11.6MPA | BU38-75X-0.11.6MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1284-04 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/2MPA) BU38-75X-0.12MPA | BU38-75X-0.12MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|
|
|
60-1284-05 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/2.5MPA) BU38-75X-0.12.5MPA | BU38-75X-0.12.5MPA | 1piece | JPY: 11,800 | USD: 74.02 |
|
|
|
60-1284-06 | Sealed Coupled Surface Diameter: Φ75 (BC10-231 x -0.1/3.5MPA) BU38-75X-0.13.5MPA | BU38-75X-0.13.5MPA | 1piece | JPY: 11,900 | USD: 74.65 |
|